Mining Incidents

QUARTZITE QUARRY Metal/Non-Metal

Controlada por CRH PLC
Lincoln, Lincoln Condado, KS  ·  Abandoned
ID de mina MSHA: 1400699

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en QUARTZITE QUARRY.

Muertes
0
Incidentes totales
20
Años en registro
2000–2023
Último incidente
Mar 2023
Historial de cumplimiento
Citaciones de MSHA desde 2000
156
citaciones
35
significativas y sustanciales
$70,801
multas propuestas
$70,801
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2024 Q4 1,855 0 0 0.0
2024 Q3 3,716 0 0 0.0
2024 Q2 3,567 6 1 1682.1
2024 Q1 4,613 9 0 1951.0
2023 Q4 5,687 0 0 0.0
2023 Q2 7,225 1 0 138.4
2023 Q1 7,283 1 0 137.3
2022 Q4 5,690 0 0 0.0
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

20 en archivo

2023 · 1 incidente

2 de marzo de 2023 KS · Metal/No metálico Operario de banco, Cantero MANEJO DE MATERIALES
Apac-Kansas Inc Shears Division · Atrapado en, bajo o entre dos o más objetos en movimiento

Employee was in the Secondary tower running the plant when employee noticed that the feed stopped due to a plug. Employee left the tower and Locked Out the #1 belt and the feeder pan in the tunnel. Employee went to inspect the plug. Employee put on gloves and attempted to remove the plug. While removing the rock, employee's finger was smashed between 2 rocks.

2018 · 1 incidente

5 de noviembre de 2018 KS · Metal/No metálico Operario de banco, Cantero MANEJO DE MATERIALES
Apac-Kansas Inc Shears Division · Golpeado por objeto proyectado

Employee attempted to throw metal pipe into roll off bin pipe struck bin and came back and struck employee in the left ear causing laceration that required stiches.

2013 · 1 incidente

6 de diciembre de 2013 KS · Metal/No metálico Capataz de exterior, Cabo RESBALÓN O CAÍDA DE PERSONA
Apac-Kansas Inc Shears Division · Sobreesfuerzo, no clasificado en otra parte

While working on the night shift, the employee was walking from the control tower to the metal detector, which needed to be reset, the employee slipped on the ground and injured his right knee. Incident originally occurred on 12/6/13, then became recordable on 3/25/14 after orthopedic consultation.

2011 · 1 incidente

2 de mayo de 2011 KS · Metal/No metálico Operario de banco, Cantero RESBALÓN O CAÍDA DE PERSONA
Apac-Kansas Inc Shears Division · Caída desde andamios, pasarelas, plataformas

The hole cover had become dislodged and came free of the platform during transport.The employee put the cover back up on the platform and stated that it's not in the right place then he accessed the platform to unhook a chain from the loader.The employee then inadvertently stepped on the cover and since the cover was not in its proper place it allowed him to fall through the hole.

2008 · 2 incidentes

16 de octubre de 2008 KS · Metal/No metálico Soldador (de taller) HERRAMIENTAS MANUALES (SIN MOTOR)
Apac-Kansas Inc Shears Division · Sobreesfuerzo, no clasificado en otra parte

Employee was using a pry bar to clear a blockage in the crusher which was locked and tagged out. After using the bar for about 15 minuted he felt a pain in his right shoulder. Medical treatment began 10/16/08 but this incident did not become recordable until 12/2/08.

2007 · 3 incidentes

21 de marzo de 2007 KS · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado HERRAMIENTAS MANUALES (SIN MOTOR)
Apac-Kansas Inc Shears Division · Golpeado por... no clasificado en otra parte

cutting a piece of new side belting when knife slipped and cut right knee

12 de marzo de 2007 KS · Metal/No metálico Operario de banco, Cantero MANEJO DE MATERIALES
Apac-Kansas Inc Shears Division · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

While doing maintanence on a locked out, tagged out not running vibrating feeder pan, employee inadvertently rotated a pulley and pinched right thumb.

19 de enero de 2007 KS · Metal/No metálico Operario de banco, Cantero MANEJO DE MATERIALES
Apac-Kansas Inc Shears Division · Sobreesfuerzo, no clasificado en otra parte

Employee claims he was moving a fuel hose when he aggravated his left shoulder. This employee had previously injured this shoulder in a NON-WORK related accident. This was not recordable until he went to the doctor on May 4, 2007 and received a cortisone shot in his shoulder.

2002 · 5 incidentes

5 de noviembre de 2002 KS · Metal/No metálico Soldador (de taller) MANEJO DE MATERIALES
Apac-Kansas Inc Shears Division · Golpeado por... no clasificado en otra parte

EE OPENED SIGHT DOOR OF OIL BURNING STOVE TO LOOK IN AND SOOT BLEW INTO HIS EYES CAUSING ABRASIONS.

25 de junio de 2002 KS · Metal/No metálico Ayudante de perforación MAQUINARIA
Apac-Kansas Inc Shears Division · Sobreesfuerzo, no clasificado en otra parte

EE DID NOT HAVE AN ACCIDENT & DOES NOT KNOW CAUSATION. ELBOW HURTS AFTER RUNNING DRILL FOR 30 MINUTES.

27 de marzo de 2002 KS · Metal/No metálico Operador de volteador rotativo, Operador de volteador de vagones MANEJO DE MATERIALES
Apac-Kansas Inc Shears Division · Golpeado por... no clasificado en otra parte

EE STRUCK HIS LEFT KNEE ON A PIECE OF ANGLE IRON, WHILE CLIMBING A SCREEN LADDER, CAUSING A LACERATION.

11 de enero de 2002 KS · Metal/No metálico Soldador (de taller) MAQUINARIA
Apac-Kansas Inc Shears Division · Golpeado por... no clasificado en otra parte

EE WELDED A PLATE TO THE FLOOR LINER OF THE TELESMITH TO SUPPORT A HYDRAULIC JACK. SUPPORT CAME LOOSE STRIKING EE IN RIGHT SHIN.

2001 · 4 incidentes

18 de julio de 2001 KS · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina TRASTORNOS (AGENTES FÍSICOS)
Apac-Kansas Inc Shears Division · Contacto con el calor

EE WAS WELDING AND MAINTAINING EQUIPMENT IN 100 WEATHER. EE BECAME DEHYDRATED FROM WORKING IN SUCH CONDITIONS.

6 de junio de 2001 KS · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina HERRAMIENTAS MANUALES (SIN MOTOR)
Apac-Kansas Inc Shears Division · Golpeado por... no clasificado en otra parte

EE WAS POUNDING ON SOUTH CRUSHER AT SECONDARY. THE HEAD OF THE SLEDGEHAMMER MISSED THE OBJECT AND THE HANDLE HIT THE WEDGE CAUSING IT TO PINCH HIS FINGER. LACERATION (STITCHES) TO LEFT INDEX F INGER.

20 de abril de 2001 KS · Metal/No metálico Conductor de camión OTRO
Apac-Kansas Inc Shears Division · Absorción de radiaciones, cáusticos, sustancias tóxicas y nocivas

WHILE SHOVELING SAND FROM UNDER THE PRELIMINARY CRUSHER EMPLOYEE WAS BITTEN ON THE LEFT GROIN BY A BROWN RECLUSE SPIDER. EMPLOYEE WASN'T SURE IT WAS A SPIDER BITE UNTIL HE WENT TO DOCTOR ON 4- 23-01.

2000 · 2 incidentes

10 de julio de 2000 KS · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina GOLPEAR O CHOCAR
Apac-Kansas Inc Shears Division · Golpeado contra un objeto fijo

EMPLOYEE WAS WALKING UP NORTH CONVEYOR, THEN BUMPED HEAD ON STABILIZER BAR BETWEEN SUPPORT CABLES, CAUSING NECK SPRAIN.