Avísenme cuando se presente un nuevo incidente de la MSHA en Patrick No 2.
EMPLOYEE WAS ATTEMPTING TO GET A MANTRIP WHEN HE LOST HIS FOOTING AND FELL AGAINST THE SIDE OF THE CAR HITTING HIS ELBOW.
HIS FINGER WAS CAUGHT BETWEEN TWO PIECES OF METAL WHILE MOVING SCRAP METAL DURING CLEANUP PROCEDURE.
HE WAS TURNING TO GO IN DIFFERT DIRECTION HIS FOOT STAYED PLATED AND HIS RIGHT KNEE TWISTED.
EE WAS PULLING MINER CABLE OVER FOR BOLTER TO TRAM BY.
WAS RIDING IN MANTRIP ON TRACKWAY. HE RAISED FOOT UP TO KEEP CURTAIN FROM HITTING HIM IN THE FACE. HIS FOOT BECAME FOULED IN CURTAIN & HYPEREXTENED KNEE & BROKE BONE IN KNEE.
SAID HE HURT HIS BACK WHILE LOADING A ROCK DUSTER IN A SCOOP AT THE FACE. ACCIDENT OCCURRED 3 DAYS PRIOR TO EMPLOYEE NOTIFYING EMPLOYEE.
EMPLOYEE WAS RUNNING ROOF BOLTER WHEN A PIECE OF DRAW ROCK FELL OUT BETWEEN THE RIB & THE OPERATORS CANOPY-THE PIECE OF ROCK WAS 2' X 2' X 1/2' THICK-IT HIT THE EMPLOYEE ACROSS THE BACK CAUSIN G HIM TO JERK & BEND OVER FORWARD REAL FAST. HE THOUGHT FROM JERKING MOTION THAT IT CAUSED HIM TO PULL A MUSCLE IN HIS BACK.
54736YEE WAS OPERATING A SHUTTLE CAR IN 36" SEAM HEIGHT AND HIT HIS HEAD AGAINST THE ROOF.IT STRAINED THE MUSCLES IN HIS NECK AND SHOULDERS.
VICTIM WAS TRAMMING A BOLTING MACHINE ACROSS THE SECTION & PUT HIS HAND UNDER THE DECK THE BOLTING MACHING BOUNCED ON A BUMP & HE HELD ONTO THE DECK & CAUGHT HIS FINGERS
EMPLOYEE WAS PRYING A PIECE OF SLATE ROCK OFF OF CONTINUOUS MINER. THE ROCK BROKE WHERE THE SLATE BAR WAS AGAINST IT, CAUSING THE ROCK TO SPLINTER INTO SMALL PIECES. A SMALL PIECE FLEW INTO T HE VICTIMS RIGHT EYE AND LACERATED PART OF THE LENS.
MANTRIP TRAVELING INSIDE TOGETHER ONE HAD TO STOP SUDDENLY AND WAS HIT BY THE OTHER ONE IN THE REAR THE JAR FROM THE IMPACT HURT THE FICTIMS SHOULDER.
EE HURT HIS BACK WHILE DRIVING THE SCOOP, WHICH IS PART OF HIS REGULAR JOB PROBABLY CAME FROM THE CONTINUOUS JAR OF THE SCOOP.
AFFECTED AREA 3 BREAKS OUTBY #3 DRIVE IN #1 ENTGGRY ON RETURN PROBOUBLE CAUSE STRIP GOB SHOOTING OVER TOP OF OLD PILLAR WORKS WHICH CREATED MOVEMENT AND RODE OVER SEAL INTERETION FELL I NO INJ URIE OCCURRED.
CHECKING A CRIBB,PIECE OF DRAWROCK CAME LOOSE AND HIT I.NAME IN THE BACK.
DURING THE PROCESS OF SPLICING #1 MAIN LINE BELT EMPLOYEE HAT FELL OFF AS HE ATTEMPTED T O PUT HIS HAT BACK ON HE CAUGHT HIS FINGER ON STRAP & CUT IT
CAUGHT FINGER IN CLAMP ON BELT #2 SECTION.
I.NAME FIRST BOLTED 1 PLACE IN FACE THEN CRAWLED TOWARD POWER BOX TO START ON POWER MOVE.GRABBED FEEDER CABLE TO PULL IT DOWN AND FELL TO THE GROUND.HAD NUMBNESS IN RIGHT LEG AT FIRST.DR DIAG; PROBLEM WITH EMPL BACK.
A PIECE OF DRAW SLATE FELL FROM ROOF HITTING THE EE ON THE LOWER BACK.
EMPL WAS CLEANING UNDER BELTHEAD WITH SHOVEL WHEN SHOVEL CAUGHT HEAD ROLLER FORCING SHOVEL HANDLE DOWN ON EMPLS HAND MASHING IT BETWEEN HANDLE & GROUND.
WHILE BOLTING #3 ENTRY AFTER 2ND ROW OF BOLTS, OFFSIDE OPERATOR STOOD TOO CLOSE TO ATRS WHILE BEING SET DOWN. DRAW ROCK FELL AS ATRD WAS SET DOWN, SLIDING DOWN AND HITTING MAN IN BACK.
LET BOLTER POT DOWN ON LEFT FOOT
NO ONE INJURED-TOP COLLAPSED IN #6 ENTRY-7 BREAKS OUTBY FACE AREA. INVOLVED 3 BREAKS 210' LONG 18' WIDE.
EMPLOYEE WAS INSTALLING ROOF BOLTS. WHILE PREPARING TO INSTAL A BOLT CLOSEST TO THE RIB, AS HE SWUNG THE DRILL POT OUT HE PINNED HIMSELF BETWEEN IT AND THE RIB.
I NAME WAS PULLING MINER CABLE
LIFTING BELT CLMAPS TO MAKE BELT SPLICE ENCOUNTERED PAIN IN LOWER BACK.THIS INCIDENT WAS A RE-OCCURENCE OF ACCIDENT ON 04-09-91 ON #1 MINE ID NO-1511152.EMPLOYEE HAD RETURNED TO WORK AND WORKE D 3 SHIFTS.
DRIVING 4 WHEEL BUGGY DOWN MAIN CAUGHT HEAD BETWEEN TO AND BUGGY
VICTIM WAS UNLOADING A BOX OF RESCESS FROM RAILRUNNER ON THE SURFACE HE LOST HIS BLANACE AND WHILE FALLING HIS FINGER GOT CAUGHT BETWEEN THE BOX AND THE FRAME OF THE RAILRUNNER THUS CUTTING HI S FINGER IN BETWEEN THE TWO OBJECTS.
WHILE HOLDING CABLE GOT RIGHT HAND CAUGHT BETWEEN CABLE AND BOLTER.
INJURED WAS PUTTING CONDUIT SR MINER CABLE WHEN HIS BACK BECAME SORE.THIS RESULTED IN A SLIPPED DISC.
USING MATICH TO CLEAN UNDER TRUCK HIT PART WITH MATTICH-PIECE OF STEEL FLEW OFF AND HIT LEFT EYE.
PUTTING BULL GEAR ON TARDUM SHAFT WITH A CRIB BLOCK TIRE FINGER ON RT HAND WAS CAUGHT BETWEEN CRIB BLOCK AND GRAVE.
WHILE THROWING BAG OF ROCK DUST ACROSS BELT INJURED LOWER PART BACK
MOTOR OPER PULLING SLACK UP IN CABLE WHEN CABLE AND WATER LINE TIGHTEN UP WHERE IT WAS HUNG.I.NAME WENT TO DROP CABLE WHEN THE METAL COUPLING IN WATER LINE HIT HIM ON FORE AS IT PULLED DOWN.
WHILE PULLING MINER CABLE IN #5 ENTRY. EMPL SAID HE PULLED MUSCLE IN BACK.
TRACK BROKE ON S.R. MINER. WHILE IN PROCESS OF PUTTING CAT PADS BACK TOGETHER A PIECE OF METAL WAS SHIPPED OFF A PIN AS IT WAS BEING DRIVEN IN PLACE. IT STRUCK I.NAME'S EYE AND CUT HIS PUPIL.
WHILE BOLTER MAN WAS MOVING PIECE OF DRAW ROCK OUT OF WAY SO HE COULD BOLT, HE PULLED MUSCLE IN BACK.
WHILE IN PROCESS OF UNROLLING A PIECE OF 3" WATER LINE IT SPRUNG BACK AND HIT I.NAME OVER RIGHT EYE.
AFTER CLEANING RIBS SCOOP OPERATOR WAS GETTING OFF SCOOP MODEL 482 S&S IN APPROX 38" COAL & TWISTED BACK.
INJURED EMPLOYEE WAS PICKING UP A CINDER BLOCK AND STRAINED HIS BACK.
SETTING TIMBERS3ON PILLAR ROW AND HE TURNED TO TUN WITH TIMBER IN HANDS AND PULLED A MUSCLE.
HE WAS LIFTING 5 FINIAL DRIVE UNIT ON A 265 LEE NORISE MINER WHEN IT SLIPPED AND FELL ON HIS HANDS.
HOLE IN ROADWAY3CAR RAN INTO HOLE AND THREW I.NAME INTO TOP.
I.NAME WAS BEND3NG A ROOF BOLT WHEN IT TURNED IN HIS HAND & SLIPPED PULLING HIS BACK
I.NAME WAS PUTT3NG UP A ROOF STRAP HE HAD PUT A BOLT IN ONE END OF THE STRAP THE OTHER END WAS LOOSE HE TURNED AROUND & HIT THE LOOSE END OF STRAP
SHOVELING COAL 2N BELT LINE.