Avísenme cuando se presente un nuevo incidente de la MSHA en No 2.
EMPLOYEE WAS LIFTING BELT STRUCTURE WHEN HE FELT PAIN IN LOWER PART OF BACK.
PULLING ON MINER CABLE WHEN EMPLOYEE FELT PAIN IN LOWER PART OF BACK.
EE WAS PUTING PLASTER ON BRATTICE WHEN PLASTER GOT IN EYE.
EE WAS PULLING ON PRYBAR WHEN THE BAR SLIPPED AND EE 'S FINGER WAS CAUGHT ON STRUCTURE.
EMPLOYEE WAS LIFTING BELT STRUCTURE, AND HAD TWISTED THE WRONG WAY WHEN PUTTING IT BETWEEN BELT AND HURT HIS BACK.
EMPLOYEE WAS MOVING HEAD OF DRILL HE PLACE HIS RT HAND ON ARM OF BOLTER EMPLOYEE MOVE THE WRONG LEVER CAUSING THE HEAD TOGO UP PINCHING SMALL FINGER ON RT HAND
EMPLOYEE WAS SWINGING HEAD OF ROOF DRILL OVER THE INSTALLED ROOF BOLT WHEN THE HEAD PENT EMPLOYEE INTO RIB
FALL OCCURRED 1 ENTRY AT SPAD 483 ON 1 RIGHT PANEL OFF 2 BELT FALL WAS ABOUT 4 FT THICK AND ABOUT 50 FT LONG.
EMPLOYEE WAS LOADING TIMBER IN SCOOP BUCKETS LIFTING 5FT TIMBER WHEN HE FELT PAIN IN THE GROIN AREA
EMPLOYEE WAS PULLING A PIECE OF BELT AND STEPPED IN SCOOP BUCKET AND FELL ON PLUNGER AND HURT RIBS.
EE WAS CARRYING A CAN OF OIL AROUND 1 SHUTTLE CAR AND MUST HAVE TWISTED THE WRONG WAY AND INJURED HIS BACK.
EE WAS SATING A TIMBER. WHEN HE LET GO TO TIMER. TIMBER FELL AND STRUCK HIM ON THE WRIST.
INJURED WAS RIDING IN SCOOP BUCKET ON INTAKE ROAD WAY WHEN A LARGE SLAB OF ROCK FEEL FROM THE TOP ONTO HIS UPPER LEG. EXTENT OF INJURY UNKNOWN AT THIS TIME.
EMPLOYEE WAS PUSHING CONVEYOR CHAIN ON MINER WITH TIMBER, WHEN TIMBER CAME OUT AND STRUCK EMPLOYEE IN FACE AREA.
THE EMPLOYEE WAS SITTING BESIDE ROOF BOLTER WHEN A PIECE OF ROCK FELL BETWEEN THE ROOF BOLTS OUTBY FACE APPROX 40 FEET. THE INJURY WAS BRUISES OF THE CHEST AND SHOULDER.
EMPLOYED WAS DRILLING HOLE, WHEN GLOVE WAS CAUGHT ON DRILL STEEL AND EMPLOYEE HAND WAS HURT.
23919N BACK WHEN DRAGGING MINER CABLE.
CHANGING BEARING ON MINER. PIECE OF CHISEL CHIPPED OFF,STRUCK I.NAME IN WRIST, WENT TO DR TO GET IT OUT.
RF FALL NO 7 ENTRY 7000FT OUTBY FACE AREA
WHILE MOVING A SHUTTLE CAR ANCHOR EE STRAINED A MSUCLE IN HIS BACK.
ROOF FALL OCCURED APPROX. 1200 FT OUTBY FARE AREA ON THE NEUTRAL AIR COURSE AROUND SURVEY STATED 815.
FALL OCCURRED IN #3 ENTRY AT SPAD 761 FALL WAS A RIGHT OF HORSEBACK FALL WAS ABOUT 30FTLONG&TO 51/2FT THICK
FALL OCCURED IN NO 4 ENTRY RETURN AIR COURSE FROM SS #654 IN NO 3 3NTRY. FALL WAS RESULT OF HORSE BACK SLICKEN SIDCE NOT DETECTED DURING DEVELOPMENT. FALL MEASURED APPROX 5' THICK 20' WIDE & 7 0' LONG.
INJURED WAS ON OFF STANDARD CAR TURNING BREAK IN S+0 GO TO 6+60AD WHEN STANDARD CAR CAME FROM 4 TO 6 STRUCK OFFSTANDARD CAR IN SIDE & CAUGHT OPERATOR AGAINST CANOPY POST.
EMPL WAS STRAIGHTENING BELT ROLLER IT SLIPPED & CUT HAND.
FAULT AREA SLICKENED SIDE TOP.
ON BELT DRIVE OUTSIDE 1 MINE CONSTRUCT BEING DONE TO CANNOPY BELT DRIVE CLIMBING DOWN CAUGHT R FT IN ROPE
EMPL WAS SPLICING A CABLE WITH A POCKET KNIFE THE KNIFE SLIPPED AND CUT THE EMPLS HAND
REPAIRMAN WAS W2RKING ON BATTERY CHARGER AND BIDESED A WRENCH BETWEN THE POSITIVE AND NEGATIVE LEAD ON THE SCOOP BATTERIES.
MEDIUM SHALE HO9SEBACK UNDER A BASTARD COAL SEAM
EMPLOYEE HAD HI8 LEFT HAND LAYING ON TOP OF THE ROOF BOLTER CANOPY WHILE ATTEMPTING TO MOVE THE MACHINE THE EMPLOYEE TRAMMED THE MACHINE INOT THE COAL RIB CATCHING HIS HAND BETWEEN THE CANOPY AND THE COAL 9IB THE EMPLOYEES LEFT INDEX FINGER WAS CUT MASHED AND BROKEN