Avísenme cuando se presente un nuevo incidente de la MSHA en Cardinal #1.
DRILLING HOLE WITH ELECTRIC HAND DRILL. DRILL BIT BROKE CAUSING DRILL TO TWIST INTO EQUIPMENT BREAKING LITTLE FINGER ON RIGHT HAND. OFFSITE SHOP INJURY.
ROOF FALL APPROX. 50'X50' AT THE INTERSECTION OF #1 & #2 ENTRIES OFF THE 1ST WEST ENTRIES OFF THE MAIN SOUTH ENTRIES.
38505MPLOYEE WAS OPERATING A BUG DUSTER DRILL.HE WAS DRILLING HOLES IN THE RIB TO HANG HIGH VOLTAGE CABLE.COAL DUST WAS BLOWN BACK INTO HIS EYES(SAFETY GLASSES ARE PROVIDED TO EMPLOYEE'S).
ROOF FALL WAS FOUND BY 3RD SHIFT PUMPMAN ON 05-17-92 ROOF FALL OCCURRED AT CROSSCUT #57 OF THE 1ST SO PANEL OFF THE MAIN EAST ENTRIES THE FALL WAS 25FT LONG 18FT WIDE & 3.5FT TO 4FT IN DEPTH N ON ONE WAS IN THE MINE WHEN IT FELL & VENTILATION WAS NOT AFFECTED THE FALL WAS 4 CROSSCUTS FROM THE FACE OF THE COAL
THE EMPLOYEE WAS WORKING ON A CONTINUOUS MINER WITH A HAMMER,BREAKING A CHAIN FOR REPAIR.WHILE HITTING THE CHAIN WITH A HAMMER A PIECE OF METAL FLEW OFF AND INTO HIS RIGHT THIRD FINGER.THE EMP LOYEE WENT TO THE EMERGENCY ROOM AND HAD THE METAL EXTRACTED AND SUTURED.
ELMPLOYEE WAS LIFTING WOODEN PROPS AND FELT A STRAIN IN HIS LOWER BACK. EMPLOYEE WORKE DHIS NEXT SHIFT ON 3-2-92 REPORTED HIS ACCIDENT ON 3-3-92.
HE WAS GOING TO PUT GLUE IN A HOLE IN A HIGH PLACE & STEPPED UP ON BOOM & FOOT SLIPPED PINNER WAS SHUT OFF & HIT LEG ON BOOM
EMPLOYEE WA S OPERA TING A SCOOP & RAN OVER A ROCK WITH LEFT FRONT TIRE THE EMPLOYEE HIT HIS HEAD ON THE CANOPY OF THE SCOOP
EMPLOYEE ALLEGED HE STRAINED HIS KIDNEYS WHILE LIFTING A CROSS BAR ON 3-9=91. HE DID NOT NOTIFY HIS EMPLOYEE UNTIL 2-4-92.
ROCK FALL BETWEEN #20 AND #21 CROSSCUT APPROX. 18 FT LONG 17 FT WIDE AND 4 FT THICK.
EMPLOYEE WAS OPERATING SCOOP EMPLOYEE STOPPED SCOOP AND WAS PUTTING IT ON CHARGE THE EMPLOYEE STEPPED OUT OF THE SCOOP AND TWISTED HIA ANKLE.
THE EMPLOYEE WAS TOLD BY THE UNDERGROUND FOREMAN TO TURN ON THE UNDERGROUND BELT. THE EMPLOYEE TURN ON THE BELT AND WALKED AWAY. THE FOREMAN AGAIN CALLED THE EMPLOYEE AND TOLD HIM TO TURN THE BELT OFF. THE EMPLOYEE RAN TO THE BELT SWITCH, FELL ON A STEEL RAIL, HITTING HIS R KNEE.
ROOF FALL AT #20 CROSSCUT APPROX 14FT WIDE 25FT LONG 0+05FT THICK SUPPLY ENTRY
A ROOF FALL #23 CROSSCUT ON NORTH EAST BELT LINE 19 FT WIDE APPROX. 60 FT. LONG 0 TO 8 FT THICK IT WAS A CONTINUTION FROM OLD FALL.
SLIP IN TOP LAST CROSSCUT FACE APPROX. 20 FT LONG 19FT 0-6 FT THICK.
BELT ENTRY APPROX. 600 FT OUTBY WORKING FACE. SLIP IN TOP WITH WATER 20 FT LONG 18 FT WIDE 0-6FT THICK.
SLIP IN TOP IN BELT ENTRY APPROX. 50 FT LONG 18 FT WIDE 0-6 FT THICK.
ROCK FALL IN #5 ENTRY LAST OPEN X-CUT MAIN WEST ENTRIES 30'FROM FACE.THERE WAS A HIDDEN SLIP.
GOT A PIECE OF STEEL IN HIS LEFT EYE.
INJURED AND ANOTHER EMPLOYEE WENT TOT HE UNDERGROUND FACE BOX TO PERFORM SOME WORK ON THE LOW VOLTAGE SIDE. THEY PULLED THE VISIBLE DISCONNECTS THEN PROCEEDED TO REMOVE THE TWO LIDS OFF OF TH E LOW VOLTAGE SIDE. INJURED TOLD OTHER EMPLOYEE TO SIT DOWN BESIDE THE BOX. EMPLOYEE TEHN STARTED TO PERFORM WORK ON NEW LEADS. FOR SOME UNKNOWN REASON, INJURED SLID THE LID OFF THE VISIBLE
I.NAME USING WRENCH.IT SLIPPED CAUSING HIT HEAD AGAINST TOP.
I DROPPED A SPEED REDUCER ON MY FINGER
SLIP AND FELL AND HURT HIS BACK DUE TO ICE CONDITIONS.
INJURED WAS DRAGGING A 300# SLUSH PUMP WHEN HE INJURED HIS BACK.
PINNING IN FACE OF #4 ENTRY PIECE OF DRAW ROCK 3-4" THICK X 3'WIDE X 4'LONG FELL CATCHING HIM IN LOWER BACK.WAS TOLD DRAW ROCK WAS COMING DOWN,TO MOVE OUT.HE HESITATED FOR JUST A MINUTE -GAVE ROCK TIME TO FALL.
INJURED WAS TAKING THE CABLE OFF THE MINER HOOK STEP BACKWARD AND TRIP OVER A LOOP IN MINER CABLE. HE TOLD THE FACE BOSS AT QUITTING TIME HE HAD HURT HIS LEG. THIS WAS NOT REPORTED TO ME UNT IL 9-29-89.
THE ROCK FALL LOCATION IS IN #3 ENTRY IN THE 3RD CROSSCUT FROM THE FACE. IT IS APPROX 20FT WIDE 30 FT LONG 4 TO 5 FT THICK.
THE ROCK FALL IS IN #5 ENTRY, IN THE 2ND CROSSCUT FROM THE FACE. IT FELL THROUGH THE CROSSCUT INTO #4 ENTRY. THE FALL WAS APPROX 19FT WIDE FROM 0 TO 6 FT THICK.
THE ROCK FALL WAS IN LAST OPEN CROSSCUT #4 ENTRY APPROX. 20 FT BY 20 FT 4FT THICK.
THE FALL WAS IN #4 ENTRY LAST OPEN CROSSCUT APPROX 20 FT X 20 FT ABOUT 4 FT HIGH. TOP SHOWED MUD SLIP IN IT.
I,NAME WAS GREASING ON CONVEYOR BELT DRIVE OUTSIDE HE TOLD ME THAT THE GREASE GUN HE WAS USING QUIT WORKING & HE SLUNG IT HITTING HIS LITTLE FINGER ON HIS RIGHT HAND ON SOME PART OF THE CONVEY OR DRIVE, CONTRIBUTING TO BREAKING HIS FINGER.
HE WAS PINNING TOP WHEN A PIECE OF PINNER STEEL FELL FROM THE ROOF AND INJURED HIS MIDDLE FINGER OF THE LEFT HAND.