Avísenme cuando se presente un nuevo incidente de la MSHA en No 4.
EE WAS HANGING PULL ROPE ON MINER BOOM WHEN BOLTER OPERATOR TURN ON HIS CABLE REEL. BOLT CABLE CAUGHT EE ACROSS BACK AND KNOCKED HIM DOWN HIT HEAD ON MINER BOOM REQUIRED 6 STICHES TO CLOSE WOU
PULLING TOO HARD ON STEEL ROPE.
EMPLOYEE WAS LIFTING ON A CANOPY TO ALIGN POST TO BE WELDED.
I NAME WAS WALKING ALONG THE #3 BELT CONVEYOR WHEN HE SLIPPED ON AN OFFSET IN THE BOTTOM & TWISTED HIS RT KNEE
INJURED WAS ON HIS KNEES AND REACHED OUT AND TOUCHED SHUTTLE CAR.WHILE HE WAS TOUCHING SHUTTLE CAR THE CABLE BLEW OUT AND SHOCKED HIM.
INJURED AND ANOTHER EMPLOYEE WERE INSTALLING TIMBERS 1 BREAK INBY SPAD #778.WHEN A PIECE OF DRAW ROCK FELL FROM BETWEEN BOLTS,APPROXIMATELY 4'X4'X2" THICK WHILE PERFORMING DRILLER WORK STRIKIN G INJURED ACROSS BACK.
THE FLETCHER PINNER WAS BOLTING IN A #3 HEADING AT RIGHT BREAK AND A PIECE OF ROCK FELL OUT BETWEEN THE ATRS AND CANOPY.IT HIT INJURED IN THE BACK BETWEEN THE SHOULDER BLADES.
HE WAS HANDING PINNER CABLE AND STRAINED HIS BACK.
WORKING 4 BREAKS FROM 1 TAILPC DOWN THE BELT PICKED UP ROCK AND PUT ON BELT STRAINED BACK
HE WAS SHOVELING THE #4 TAILPIECE AND STUCK SHOVEL TO FAR UNDER THE TAIL PIECE AND THE BELT CAUGHT THE SHOVEL AND TRIED TO PULL IT UNDER THE TAIL PIECE. SO HE TRIED TO HLD ONTO THE SHOVEL AND JERK IT. HE SAID HE HURT HIS BACK WHEN HE JERKED THE SHOVEL.
HEAD DRIVE GREASING IT AND STEPPED ON SOME 2" WATER LINE AND FELL BACKWARD AND HIT HIS BACK AGAINST A CRIB BLOCK.
TRAVELING IN INTAKE TO MARK SEAL UP DAILY CAME UP ON THE FALL
INJURED WAS BUILDING A STOPPING AND A PIECE OF EWOOD GOT IN HIS EYE.
HE WAS PULLING WIRE CABLE UP TO TAIL PIECE FOR A BELT MOVE AND HIS RIGHT KNEE GAVE WAY ON HIM WHILE HE WAS PULLING ON ROPE.
HE WAS SHOVELING #2 BELT LINE AND PICKED UP A PIECE OF 36" STRUCTURE AND PUT OUT OF THE WAY. THEN HE PICKED UP A 6 INCH HOLLOW BLOCK ABOUT A FOOT OFF THE GROUND AND HAD TO DROP IT, HIS BACK ST ARTED HURTING HIM.
HE WAS LOADING SUPPLIES AND PICKED UP A BOX OF GLUE GOING TO THROW IT AGAINST THE RIB AND HURT HIS BACK.
I FOUND IT 11/3 WHEN WE WENT INTO FIRE BOSS 11/2 ABOUT 1:30 IF FOUND CRACK IN TOP CLOSE TO RIB COULDN'T GET BOLT IN TO STRAP IT WITH SO I CHECK TEST HOLE & SEEN WHERE TOP HAD SHIFTED SO I HAD THAT ENTERING CRIB OFF & DANGER OFF. SO IT FELL SOMETIME DRIVING NIGHT BECAUSE FOUND IT 11/3 AFTER FIRE BOSSING IN.
WHILE HE WAS DRILLING HOLE TO PUT BOLTING PIECE OF DRAW ROCK FELL ON LEFT ARM.
BOLTING TOP AND GOT GLOVE BETWEEN DRILL STEEL AND HEAD ON BOLTER.WHEN HE TURNED ROTATION ON IT TWISTED THUMB AROUND.
BOLTING TOP &LET DRILL HEAD ON BOLTER COME DOWN AGAINST KNEE.
LOADING BELT STRUCTURE IN SCOOP DIPPER FOR BELT MOVE.
WHEN HE STEPPED OFF THE MANTRIP HE TWISTED HIS ANKLE.
HE WAS HANGING MUDDY CABLE.
HE GOT OFF THE BOLTER TO CHECK CABLE AND SLIPPED. HE FELL BACKWARD AND HIT ON A PIECE OF ROCK. BOTTOM WAS DAMP AND SLICK.
LUMP OF COAL CAME OUT OF CONEYOR CHAIN AND HIT HIM IN HIS LEFT EYE.