HANCOCK QUARRY Metal/Non-Metal

While cutting steel with acetylene torches EE's shirt caught on fire. EE suffered burns/blisters on hand and stomach.

Removing rocks from plugged head pulley discharge box, EE initially reported right shoulder strain (9/10), worked 9/7, 9/10, & 9/11. On 9/11, EE sought medical treatment for left shoulder pain.

While cleaning syntron pan a bar fell and struck EE on the chin causing a contusion to chin and lip.

While removing rock from discharge conveyor EE slipped and struck head on sledge hammer

While moving full barrels of oil, EE managed to pinch wrist/forearm between barrels. Pinch/crush injury, no fractures.

EE complained about a sore right knee from driving a loader.

While connecting hoses to Sanvic crusher, EE stood up and cut head on a piece of channel iron.

While disassembling a crusher a wrench on a bolt slipped off the bolt striking employee above left knee. Employee did not report that he was injured until 7/13/2015

While pounding wedges into crusher to disassemble it, a piece of the steel wedge broke off penetrating the employee's abdomen. Employee has a follow up outpatient surgery to remove the object.

While reaching to remove a rock from conveyor EE felt a sharp pain in his back, 5-10lb rock.

After exiting his pickup truck ee slipped on ice and twisted his left knee.

While ee was installing a conveyor belt, EE was using a cutting torch to remove bolts, the torch somehow got entangled in sleeve of leather welding jacket causing torch head to pull into his sleeve causing second degree burn to his left forearm.

While removing obstruction from jaw crusher, lifting chain broke, cutting EE's finger.

While cleaning loader bucket with air gun, debris came up and over safety glasses entering his eye.

While cutting metal from crusher, hot metal fell on employee's arm causing a burn.

While exiting truck EE closed the door on left middle finger.

While cutting metal with acetelene torch debris entered EE's eye causing iritation.

While grinding metal debris entered EE's eye causing irritation.

While preparing a vehicle in the shop, employee struck his forehead on vehicle crossmember (transmission) lacerating his forehead.

WHILE ATTEMPTING TO REMOVE A CONVEYOR, THE MECHANISM THAT WAS STABILIZING IT FAILED. AS A RESULT, THE CONVEYOR AND THE INDIVIDUAL DROPPED CAUSING THE EMPLOYEE TO LOSE HIS FOOTING AND BALANCE RESULTING IN HIM FALLING ON HIS RIGHT ARM ONTO THE CONVEYOR. THIS RESULTED IN THE EMPLOYEE BREAKING HIS UPPER RIGHT ARM.

EMPLOYEE WAS PICKING UP STEEL WHEN IT SLID AWAY FROM HIM PINCHING HIS INDEX & MIDDLE RIGHT HAND FINGERS TO THE GROUND.

EE WAS CLIMBING OFF HIS LOADER WHEN HE SLI-PPED OFF BOTTOM STEP CAUSING HIM TO FALL AND HIT HIS WRIST.

EE WAS ON TOP OF THE BAGHOUSE CLEANING OUT DUST WHEN HE ACCIDENTLY BUMPED THE DOOR TO THE BAGHOUSE AND IT SLAMMED HIS FOOT AS IT FELL DOWN.

EE WAS STANDING ON THE GOOSENECK (TRAILER) WHILE ASSISTING WITH THE LOADING OF A CONVEYOR ON TRAILER. THE CONVEYOR SHIFTED FORWARD, DURINGH LOADING AND PINCHED EE'S TOES. TOES PINCHED BETWEEN CONVEYOR AND GOOSENECK.

EE WAS PUTTING A TRACK BACK ON BOBCAT EXCAVATOR. TRACT SLIPPED OUT OF HIS HAND AND PINCHED HIS RIGHT HAND IN BETWEEN THE TRACK AND FRAME.

EE WAS OPERATING THE LOADER ON BUMPY ROAD CONDITIONS.

EMPLOYEE WAS LIFTING A ROCK, WEIGHING APPROX. 100 LBS WITH HIS RIGHT HAND. HE MOVED THE ROCK ABOUT 1 FOOT AND FELT A SHARP PAIN RUN THROUGH HIS BACK. THE PAIN CAUSED HIM TO GET VERY WEAK.

EMPLOYEE WAS LIFTING THE SCREEN FOR THE SCALPER AT THE SECONDARY PLANT TO POSITION IT CORRECTLY WHILE LIFTING SCREEN HE TURNED TO THE LEFT,PULLING A MUSCLE IN HIS BACK.

WHILE INSTALLING A NEW TAPER LOCK ON A SHAFT IN A NEW HEAD PULLEY EE PINCHED PALM OF RIGHT HAND IN THE SPREAD OF THE TAPER LOCK WHEN THE SCREWDRIVER SLIPPED OUT.

EMPLOYEE WAS OPERATING THE LOADER PICKING UP BOULDERS. A LARGE BOULDER ROLLED OFF THE BUCKET CAUSING THE LOADER TO JERK. THE EMPLOYEE FELT HIS BACK PULL AND PAIN SHOT DOWN HIS LEFT LEG.

HIT HEAD ON PIECE OF SCREEN CLOTH.HARD HAT PUSHED OFF -CUT FOREHEAD ON EDGE OF SCREEN CLOTH.

OPENING PAILS WITH KNIFE, IT SLIPPED PUNCT. L ARM

THE EUCLID THE EMPLOYEE WAS DRIVING WAS BEING LOADED BY A POWER SHOVEL AND HIS BACK WAS JOLTED DURING THE PROCESS, ACCIDENT WAS NOT REPORTED UNTIL 9/13/89.

SLIPPED ON ICE AS HE WAS GETTING OUT OF PERS VEHICLE

HIT L ARM ON DRILL BOOM WHILE CHANGING DRILL STEELS BROKE ARM INJURY OCCURRED ON 10-18-88 AND WAS NOT REPORTED TO SUPERVISOR UNTIL 10-19-88

EMPLOYEE WAS CARRYING POWDER AT THE SHOT WHEN HE SLIPPED AND STRAINED MUSCLE IN GROIN AREA.

DIRT IN EYE SWE5LED UP THE NEXT DAY

PUTTING OUT A F3RE IN A SWITCH BOX HE STUCK HIS HAND THROUGH A WINDOW TO LET THE SMOKE OUT