Employee twisted knee when climbing down from excavator. When employee turned in FMLA/Disability paperwork on 5/31/17 for upcoming knee surgery, they had noted on the paperwork that the injury occurred at work. When employee requested time off in Feb for a Dr appointment for knee pain, they were asked it if happened at work and they responded "No".
Hillsborough Mine: 240 citaciones de la MSHA Metal/Non-Metal
Hillsborough Mine tiene $120K en multas propuestas de MSHA y $0 pendientes en 9 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Hillsborough Mine.
- Muertes
- 0
- Incidentes totales
- 27
- Años en registro
- 1983–2017
- Último incidente
- Feb 2017
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Hillsborough Mine tiene $120K en multas propuestas de MSHA y $0 pendientes en 9 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 41 · 100%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| SE 2012-497M | Settlement | Gill | 2014 | $27K → $18K |
| SE 2012-395M | Settlement | Gill | 2014 | $22K → $18K |
| SE 2015-0471 | Settlement | Miller | 2016 | $21K → $15K |
| SE 2015-0119 | Settlement | McCarthy | 2015 | $5K → $3K |
| SE 2014-0273 | Settlement | Lesnick | 2015 | $2K → $2K |
| SE 2014-0325 | Settlement | McCarthy | 2014 | $634 → $507 |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2025-12-17
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Quartz, respirable, >1% Qtz10225 en exceso
- Respirable dust, <.1mg16
- Nuisance dust, respirable, <1% Qtz2
- Asbestos 2.0f/ml1
Ver los análisis individuales (100)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2025-12-17 | Quartz, respirable, >1% Qtz | 0.6 | 0.54 | 1.11 | Bagging Operator |
| 2015-06-16 | Quartz, respirable, >1% Qtz | 0.56 | 0.42 | 1.33 | Bagging Operator |
| 2014-09-04 | Quartz, respirable, >1% Qtz | 1.78 | 0.73 | 2.44 | Bagging Operator |
| 2010-01-27 | Quartz, respirable, >1% Qtz | 1.66 | 0.61 | 2.72 | Ball Mill Operator |
| 2008-10-21 | Quartz, respirable, >1% Qtz | 1.56 | 0.67 | 2.33 | Ball Mill Operator |
| 2008-08-25 | Quartz, respirable, >1% Qtz | 2.12 | 0.56 | 3.79 | Ball Mill Operator |
| 2006-03-08 | Quartz, respirable, >1% Qtz | 0.98 | 0.39 | 2.51 | Bagging Operator |
| 2005-12-06 | Quartz, respirable, >1% Qtz | 1.97 | 0.48 | 4.10 | Bagging Operator |
| 2005-07-07 | Quartz, respirable, >1% Qtz | 0.4 | 0.4 | 1.00 | Bagging Operator |
| 2005-05-17 | Quartz, respirable, >1% Qtz | 0.63 | 0.47 | 1.34 | Bagging Operator |
| 2005-02-10 | Quartz, respirable, >1% Qtz | 0.55 | 0.33 | 1.67 | Bagging Operator |
| 2005-01-19 | Quartz, respirable, >1% Qtz | 0.94 | 0.37 | 2.54 | Bagging Operator |
| 2004-09-29 | Quartz, respirable, >1% Qtz | 0.83 | 0.69 | 1.20 | Utility Man |
| 2004-09-29 | Quartz, respirable, >1% Qtz | 0.67 | 0.62 | 1.08 | Dry Screen Plant Operator |
| 2004-09-29 | Quartz, respirable, >1% Qtz | 1.18 | 0.69 | 1.71 | Crusher Oper/Worker |
| 2004-05-26 | Quartz, respirable, >1% Qtz | 2.78 | 0.42 | 6.62 | Dry Screen Plant Operator |
| 2004-05-26 | Quartz, respirable, >1% Qtz | 2.2 | 0.33 | 6.67 | Utility Man |
| 2004-05-26 | Quartz, respirable, >1% Qtz | 2.52 | 0.55 | 4.58 | Crusher Oper/Worker |
| 2004-01-06 | Quartz, respirable, >1% Qtz | 0.65 | 0.32 | 2.03 | Dry Screen Plant Operator |
| 2004-01-06 | Quartz, respirable, >1% Qtz | 0.6 | 0.32 | 1.88 | Washer Operator |
| 2004-01-06 | Quartz, respirable, >1% Qtz | 1.51 | 0.26 | 5.81 | Utility Man |
| 2004-01-06 | Quartz, respirable, >1% Qtz | 2.87 | 0.43 | 6.67 | Crusher Oper/Worker |
| 2003-11-17 | Quartz, respirable, >1% Qtz | 4.55 | 0.35 | 13.00 | Utility Man |
| 2003-11-17 | Quartz, respirable, >1% Qtz | 0.63 | 0.37 | 1.70 | Dry Screen Plant Operator |
| 2003-11-17 | Quartz, respirable, >1% Qtz | 0.61 | 0.59 | 1.03 | Washer Operator |
| 2025-12-17 | Quartz, respirable, >1% Qtz | 0.42 | 1.64 | 0.26 | Front-end Loader Operator |
| 2025-12-17 | Respirable dust, <.1mg | 0 | Ball Mill Operator | ||
| 2024-05-21 | Quartz, respirable, >1% Qtz | 0.21 | 0.55 | 0.38 | Crusher Oper/Worker |
| 2024-05-21 | Respirable dust, <.1mg | 0 | Bagging Operator | ||
| 2024-05-21 | Quartz, respirable, >1% Qtz | 0.16 | 0.89 | 0.18 | Bagging Operator |
| 2024-05-21 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2023-03-23 | Quartz, respirable, >1% Qtz | 0.19 | 0.6 | 0.32 | Scale Man |
| 2023-03-23 | Respirable dust, <.1mg | 0 | Backhoe Operator | ||
| 2023-03-23 | Quartz, respirable, >1% Qtz | 0.4 | 0.87 | 0.46 | Bagging Operator |
| 2023-03-23 | Quartz, respirable, >1% Qtz | 0.34 | 0.61 | 0.56 | Crusher Oper/Worker |
| 2023-03-23 | Quartz, respirable, >1% Qtz | 0.16 | 0.54 | 0.30 | Utility Man |
| 2022-01-13 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2022-01-13 | Quartz, respirable, >1% Qtz | 0.22 | 0.64 | 0.34 | Ball Mill Operator |
| 2020-12-02 | Quartz, respirable, >1% Qtz | 0.47 | 0.97 | 0.48 | Crusher Oper/Worker |
| 2020-12-02 | Quartz, respirable, >1% Qtz | 0.13 | Bagging Operator | ||
| 2020-12-02 | Quartz, respirable, >1% Qtz | 0.5 | 0.62 | 0.81 | Bagging Operator |
| 2020-12-02 | Nuisance dust, respirable, <1% Qtz | 1.56 | 10 | 0.16 | Sampler, Dust |
| 2020-03-17 | Quartz, respirable, >1% Qtz | 0.64 | 0.77 | 0.83 | Crusher Oper/Worker |
| 2020-03-17 | Quartz, respirable, >1% Qtz | 0.3 | 0.49 | 0.61 | Bagging Operator |
| 2020-03-17 | Quartz, respirable, >1% Qtz | 0.31 | 0.76 | 0.41 | Bagging Operator |
| 2019-02-26 | Quartz, respirable, >1% Qtz | 0.64 | 0.74 | 0.86 | Crusher Oper/Worker |
| 2019-02-26 | Quartz, respirable, >1% Qtz | 0.41 | 0.47 | 0.87 | Bagging Operator |
| 2019-02-26 | Quartz, respirable, >1% Qtz | 0.23 | 0.67 | 0.34 | Sampler, Dust |
| 2019-02-26 | Quartz, respirable, >1% Qtz | 0.32 | 0.55 | 0.58 | Bagging Operator |
| 2018-03-27 | Quartz, respirable, >1% Qtz | 0.25 | 0.32 | 0.78 | Ball Mill Operator |
| 2018-03-27 | Quartz, respirable, >1% Qtz | 0.16 | 0.42 | 0.38 | Crusher Oper/Worker |
| 2017-05-09 | Quartz, respirable, >1% Qtz | 0.26 | 0.35 | 0.74 | Crusher Oper/Worker |
| 2017-05-09 | Quartz, respirable, >1% Qtz | 0.23 | 0.31 | 0.74 | Utility Man |
| 2017-05-09 | Quartz, respirable, >1% Qtz | 0.25 | 0.5 | 0.50 | Bagging Operator |
| 2016-03-29 | Quartz, respirable, >1% Qtz | 0.18 | 0.44 | 0.41 | Crusher Oper/Worker |
| 2016-03-29 | Respirable dust, <.1mg | 0 | Bagging Operator | ||
| 2016-03-29 | Respirable dust, <.1mg | 0 | Ball Mill Operator | ||
| 2015-08-04 | Respirable dust, <.1mg | 0 | Bagging Operator | ||
| 2015-06-16 | Quartz, respirable, >1% Qtz | 0.19 | 0.53 | 0.36 | Bagging Operator |
| 2015-06-16 | Quartz, respirable, >1% Qtz | 0.18 | 0.41 | 0.44 | Crusher Oper/Worker |
| 2015-06-16 | Respirable dust, <.1mg | 0 | Backhoe Operator | ||
| 2015-06-16 | Quartz, respirable, >1% Qtz | 0.14 | 0.34 | 0.41 | Crusher Oper/Worker |
| 2015-01-28 | Quartz, respirable, >1% Qtz | 0.42 | 0.46 | 0.91 | Ball Mill Operator |
| 2015-01-28 | Quartz, respirable, >1% Qtz | 0.27 | 0.51 | 0.53 | Crusher Oper/Worker |
| 2015-01-28 | Quartz, respirable, >1% Qtz | 0.63 | 0.67 | 0.94 | Bagging Operator |
| 2014-10-09 | Quartz, respirable, >1% Qtz | 0.3 | 0.45 | 0.67 | Bagging Operator |
| 2014-09-04 | Quartz, respirable, >1% Qtz | 0.18 | 0.74 | 0.24 | Crusher Oper/Worker |
| 2014-09-04 | Nuisance dust, respirable, <1% Qtz | 0.17 | 10 | 0.02 | Crusher Oper/Worker |
| 2014-09-04 | Quartz, respirable, >1% Qtz | 0.14 | 1.29 | 0.11 | Backhoe Operator |
| 2013-06-19 | Quartz, respirable, >1% Qtz | 0.17 | 0.34 | 0.50 | Sampler, Dust |
| 2013-06-19 | Quartz, respirable, >1% Qtz | 0.28 | 0.36 | 0.78 | Bagging Operator |
| 2013-06-19 | Quartz, respirable, >1% Qtz | 0.23 | 0.3 | 0.77 | Ball Mill Operator |
| 2012-01-10 | Respirable dust, <.1mg | 0 | Mechanic | ||
| 2012-01-10 | Quartz, respirable, >1% Qtz | 0.12 | 0.37 | 0.32 | Ball Mill Operator |
| 2012-01-10 | Quartz, respirable, >1% Qtz | 0.46 | 0.54 | 0.85 | Crusher Oper/Worker |
| 2012-01-10 | Respirable dust, <.1mg | 0 | Bagging Operator | ||
| 2012-01-10 | Quartz, respirable, >1% Qtz | 0.16 | 0.56 | 0.29 | Bagging Operator |
| 2011-05-11 | Quartz, respirable, >1% Qtz | 0.42 | 0.71 | 0.59 | Crusher Oper/Worker |
| 2011-05-11 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2011-05-11 | Quartz, respirable, >1% Qtz | 0.15 | 0.32 | 0.47 | Utility Man |
| 2011-01-06 | Quartz, respirable, >1% Qtz | 0.19 | 0.53 | 0.36 | Bagging Operator |
| 2011-01-06 | Quartz, respirable, >1% Qtz | 0.24 | 0.55 | 0.44 | Crusher Oper/Worker |
| 2010-08-04 | Respirable dust, <.1mg | 0 | Dry Screen Plant Operator | ||
| 2010-08-04 | Quartz, respirable, >1% Qtz | 0.58 | 0.65 | 0.89 | Crusher Oper/Worker |
| 2010-04-20 | Unlisted Particulate, respirable, <1% Qtz | 0.38 | Bagging Operator | ||
| 2010-01-27 | Quartz, respirable, >1% Qtz | 0.59 | 0.72 | 0.82 | Crusher Oper/Worker |
| 2010-01-27 | Quartz, respirable, >1% Qtz | 0.55 | 0.67 | 0.82 | Bagging Operator |
| 2009-05-13 | Quartz, respirable, >1% Qtz | 0.33 | 1.55 | 0.21 | Ball Mill Operator |
| 2009-05-13 | Quartz, respirable, >1% Qtz | 0.61 | 2.17 | 0.28 | Crusher Oper/Worker |
| 2009-05-13 | Quartz, respirable, >1% Qtz | 0.25 | 0.68 | 0.37 | Ball Mill Operator |
| 2009-05-13 | Quartz, respirable, >1% Qtz | 0.85 | 1.04 | 0.82 | Hammer Mill Operator |
| 2009-05-13 | Quartz, respirable, >1% Qtz | 0.49 | 0.58 | 0.84 | Bagging Operator |
| 2009-02-11 | Quartz, respirable, >1% Qtz | 0.53 | 0.75 | 0.71 | Ball Mill Operator |
| 2008-08-25 | Quartz, respirable, >1% Qtz | 0.79 | 0.95 | 0.83 | Bagging Operator |
| 2008-08-25 | Quartz, respirable, >1% Qtz | 0.27 | 0.6 | 0.45 | Crusher Oper/Worker |
| 2008-01-24 | Quartz, respirable, >1% Qtz | 0.51 | 1.08 | 0.47 | Bagging Operator |
| 2008-01-24 | Quartz, respirable, >1% Qtz | 0.8 | 0.81 | 0.99 | Ball Mill Operator |
| 2007-06-20 | Quartz, respirable, >1% Qtz | 0.38 | 1.03 | 0.37 | Ball Mill Operator |
| 2007-06-20 | Quartz, respirable, >1% Qtz | 0.25 | 0.3 | 0.83 | Bagging Operator |
| 2007-06-20 | Quartz, respirable, >1% Qtz | 0.21 | 1.3 | 0.16 | Crusher Oper/Worker |
Hillsborough Mine registró 0.00 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2011.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2011 * | 0.00 | 0.00 | 0.000 |
| 2008 * | 14.86 | 7.43 | 0.000 |
| 2007 * | 0.00 | 0.00 | 0.000 |
| 2006 * | 0.00 | 0.00 | 0.000 |
| 2005 * | 10.97 | 5.48 | 0.000 |
| 2004 * | 4.43 | 4.43 | 0.000 |
| 2003 * | 17.07 | 11.38 | 0.000 |
| 2002 * | 0.00 | 0.00 | 0.000 |
- Resco Products Piedmont Minerals Div 1950 a 2002
- Resco Products Inc 2002 al presente
| Año | Empleados |
|---|---|
| 2026 | 6 |
| 2025 | 6 |
| 2024 | 8 |
| 2023 | 8 |
| 2022 | 6 |
| 2021 | 6 |
| 2020 | 7 |
| 2019 | 7 |
| 2018 | 7 |
| 2017 | 8 |
| 2016 | 7 |
| 2015 | 8 |
| 2014 | 9 |
| 2013 | 7 |
| 2012 | 8 |
| 2011 | 10 |
| 2010 | 10 |
| 2009 | 11 |
| 2008 | 14 |
| 2007 | 15 |
| 2006 | 16 |
| 2005 | 16 |
| 2004 | 20 |
| 2003 | 18 |
| 2002 | 17 |
| 2001 | 17 |
| 2000 | 24 |
Hillsborough Mine se ubica en Orange County, North Carolina, donde la categoría minera del Censo representa el 0.0% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 3,326 | 0 | 0 | 0.0 |
| 2026 Q1 | 3,248 | 0 | 0 | 0.0 |
| 2025 Q4 | 3,345 | 0 | 0 | 0.0 |
| 2025 Q3 | 3,626 | 0 | 0 | 0.0 |
| 2025 Q2 | 3,327 | 0 | 0 | 0.0 |
| 2025 Q1 | 3,621 | 0 | 0 | 0.0 |
| 2024 Q4 | 3,600 | 1 | 0 | 277.8 |
| 2024 Q3 | 3,639 | 0 | 0 | 0.0 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 3,958 | 0 | 0 | 0.0 |
| 2024 Q1 | 3,562 | 0 | 0 | 0.0 |
| 2023 Q4 | 3,555 | 0 | 0 | 0.0 |
| 2023 Q3 | 3,430 | 0 | 0 | 0.0 |
| 2023 Q2 | 3,484 | 0 | 0 | 0.0 |
| 2023 Q1 | 3,531 | 4 | 1 | 1132.8 |
| 2022 Q4 | 3,039 | 0 | 0 | 0.0 |
| 2022 Q3 | 3,369 | 0 | 0 | 0.0 |
| 2022 Q2 | 3,378 | 0 | 0 | 0.0 |
| 2022 Q1 | 3,205 | 0 | 0 | 0.0 |
| 2021 Q4 | 3,145 | 0 | 0 | 0.0 |
| 2021 Q3 | 3,023 | 0 | 0 | 0.0 |
| 2021 Q2 | 3,048 | 1 | 0 | 328.1 |
| 2021 Q1 | 3,003 | 0 | 0 | 0.0 |
| 2020 Q4 | 2,750 | 2 | 0 | 727.3 |
| 2020 Q3 | 2,526 | 0 | 0 | 0.0 |
| 2020 Q2 | 2,926 | 0 | 0 | 0.0 |
| 2020 Q1 | 3,434 | 1 | 0 | 291.2 |
| 2019 Q4 | 3,474 | 0 | 0 | 0.0 |
| 2019 Q3 | 3,764 | 0 | 0 | 0.0 |
| 2019 Q2 | 3,477 | 0 | 0 | 0.0 |
| 2019 Q1 | 3,319 | 2 | 0 | 602.6 |
| 2018 Q4 | 3,351 | 0 | 0 | 0.0 |
| 2018 Q3 | 3,566 | 0 | 0 | 0.0 |
| 2018 Q2 | 3,369 | 0 | 0 | 0.0 |
| 2018 Q1 | 2,933 | 0 | 0 | 0.0 |
| 2017 Q4 | 3,106 | 0 | 0 | 0.0 |
| 2017 Q3 | 3,519 | 0 | 0 | 0.0 |
| 2017 Q2 | 3,968 | 0 | 0 | 0.0 |
| 2017 Q1 | 3,554 | 0 | 0 | 0.0 |
| 2016 Q4 | 3,531 | 0 | 0 | 0.0 |
| 2016 Q3 | 3,307 | 0 | 0 | 0.0 |
| 2016 Q2 | 3,750 | 1 | 0 | 266.7 |
| 2016 Q1 | 3,556 | 0 | 0 | 0.0 |
| 2015 Q4 | 3,250 | 0 | 0 | 0.0 |
| 2015 Q3 | 3,497 | 0 | 0 | 0.0 |
| 2015 Q2 | 3,796 | 8 | 6 | 2107.5 |
| 2015 Q1 | 4,260 | 0 | 0 | 0.0 |
| 2014 Q4 | 3,816 | 0 | 0 | 0.0 |
| 2014 Q3 | 4,670 | 7 | 2 | 1498.9 |
| 2014 Q2 | 5,431 | 0 | 0 | 0.0 |
| 2014 Q1 | 4,619 | 2 | 2 | 433.0 |
| 2013 Q4 | 3,972 | 0 | 0 | 0.0 |
| 2013 Q3 | 3,988 | 0 | 0 | 0.0 |
| 2013 Q2 | 3,978 | 10 | 2 | 2513.8 |
| 2013 Q1 | 3,626 | 8 | 2 | 2206.3 |
| 2012 Q4 | 3,312 | 0 | 0 | 0.0 |
| 2012 Q3 | 3,667 | 0 | 0 | 0.0 |
| 2012 Q2 | 4,469 | 2 | 0 | 447.5 |
| 2012 Q1 | 5,048 | 29 | 16 | 5744.8 |
| 2011 Q4 | 4,990 | 0 | 0 | 0.0 |
| 2011 Q3 | 5,136 | 0 | 0 | 0.0 |
| 2011 Q2 | 5,621 | 7 | 3 | 1245.3 |
| 2011 Q1 | 5,332 | 6 | 2 | 1125.3 |
| 2010 Q4 | 4,418 | 0 | 0 | 0.0 |
| 2010 Q3 | 5,061 | 4 | 1 | 790.4 |
| 2010 Q2 | 5,053 | 0 | 0 | 0.0 |
| 2010 Q1 | 5,428 | 4 | 1 | 736.9 |
| 2009 Q4 | 4,687 | 0 | 0 | 0.0 |
| 2009 Q3 | 5,103 | 0 | 0 | 0.0 |
| 2009 Q2 | 5,030 | 2 | 0 | 397.6 |
| 2009 Q1 | 4,911 | 3 | 1 | 610.9 |
| 2008 Q4 | 6,386 | 0 | 0 | 0.0 |
| 2008 Q3 | 7,151 | 8 | 1 | 1118.7 |
| 2008 Q2 | 6,747 | 0 | 0 | 0.0 |
| 2008 Q1 | 6,634 | 6 | 4 | 904.4 |
| 2007 Q4 | 6,677 | 0 | 0 | 0.0 |
| 2007 Q3 | 7,795 | 0 | 0 | 0.0 |
| 2007 Q2 | 8,583 | 2 | 1 | 233.0 |
| 2007 Q1 | 8,787 | 0 | 0 | 0.0 |
| 2006 Q4 | 7,659 | 0 | 0 | 0.0 |
| 2006 Q3 | 7,898 | 2 | 2 | 253.2 |
| 2006 Q2 | 9,516 | 0 | 0 | 0.0 |
| 2006 Q1 | 9,395 | 2 | 0 | 212.9 |
| 2005 Q4 | 8,906 | 1 | 0 | 112.3 |
| 2005 Q3 | 9,611 | 0 | 0 | 0.0 |
| 2005 Q2 | 8,121 | 12 | 5 | 1477.7 |
| 2005 Q1 | 9,833 | 15 | 9 | 1525.5 |
| 2004 Q4 | 9,448 | 0 | 0 | 0.0 |
| 2004 Q3 | 13,885 | 1 | 1 | 72.0 |
| 2004 Q2 | 11,342 | 15 | 7 | 1322.5 |
| 2004 Q1 | 10,449 | 6 | 5 | 574.2 |
| 2003 Q4 | 9,610 | 22 | 11 | 2289.3 |
| 2003 Q3 | 8,693 | 0 | 0 | 0.0 |
| 2003 Q2 | 7,776 | 0 | 0 | 0.0 |
| 2003 Q1 | 9,075 | 0 | 0 | 0.0 |
| 2002 Q4 | 7,900 | 3 | 1 | 379.7 |
| 2002 Q3 | 8,936 | 3 | 2 | 335.7 |
| 2002 Q2 | 9,507 | 0 | 0 | 0.0 |
| 2002 Q1 | 8,296 | 5 | 3 | 602.7 |
| 2001 Q4 | 7,712 | 0 | 0 | 0.0 |
| 2001 Q3 | 7,949 | 0 | 0 | 0.0 |
| 2001 Q2 | 8,182 | 6 | 1 | 733.3 |
| 2001 Q1 | 9,103 | 12 | 2 | 1318.2 |
| 2000 Q4 | 8,654 | 0 | 0 | 0.0 |
| 2000 Q3 | 9,606 | 0 | 0 | 0.0 |
| 2000 Q2 | 9,652 | 10 | 1 | 1036.1 |
| 2000 Q1 | 10,222 | 0 | 0 | 0.0 |
Incidentes reportables
27 en archivo2017 · 1 incidente
2012 · 2 incidentes
Visitor was walking up set of five steps at main office and lost his balance. He stumbled and fell on his bottom and then bump his head.
Worker was climbing down a fixed ladder and lost balance near the bottom. The worker fell backwards breaking his wrist.
2008 · 2 incidentes
Crusher Operator changed the splitter on the elevator when a piece of metal cut his small left finger.
Crusher Plant Operator lost his footing while loosening a bolt on a crusher. The wrench slipped off of the bolt and he slipped backwards, bruising his back.
2005 · 2 incidentes
The wind blew the access door to a dust collector closed on the right hand of the employee.
Strained lower back while bagging and palletizing 50 pound bags of material.
2004 · 1 incidente
EMPLOYEE WAS PUSHING A PALLET OF MATERIAL STUCK ON A CONVEYOR. WHEN THE PALLET MOVED HE OVER-EXTENDED HIS LEFT LEG.
2003 · 3 incidentes
EE WAS CLIMBING UP A STEEL RUNG LADDER AND LOST HIS GRIP ON THE METAL RUNG, RESULTING IN LOSS OF BALANCE AND FALLING TO THE STEEL FLOOR BELOW (APPROXIMATELY 4 FT).
TOOK SHORT TERM DISABILITY (LAST DAY OF WORK 5/19/03). TOOK LONG TERM DISABILITY (STARTED AUG. 10, 2003).
NOTE: HAND INJURY OF 2/20/03 WAS NOT HEALING AS EXPECTED. DECISION WAS MADE TO OPERATE, RESULTING IN EE BEING OFF WORK FROM 8/25/03 TILL 10/13/03 RETURN TO WORK DATE.
2001 · 1 incidente
EE WAS CLIMBING A RAIL CAR LADDER AND FELL FROM THE TOP OF THE LADDER. HE FELL 10-12 FT AND LANDED ON HIS HEELS FIRST AND THEN HIS BACK. HE THENGOT UP AND WALKED ABOUT 100 FT TO THE SHOP AREA FOR HELP.
2000 · 4 incidentes
EE WAS HELPING TO MOVE AN ELECTRIC CHAIN HOIST AND WHILE BEING LOWERED TO THE GROUND, THE PALLETS ON WHICH HE WAS STANDING HUNG ON A GUARD AND TILTED THE PALLETS TO ONE SIDE CAUSING HIM TO FAL L APPROX 6 - 8 FEET ONTO A STACK OF PALLETS ON HIS BACK.
EE WAS CLEANING UP AND WENT TO DUMP TRASH CONTAINER. HE STOPPED FORK LIFT SHORT OF A DROP IN PAVEMENT AND EMPTIED CONTAINER. WHEN HE RETURNED TO THE FORK LIFT AND STARTED TO BACK UP, THE FORK LIFT ROLLED FORWARD INTO THE DROP OFF. HE HIT THE ACCELERATOR AND THE LIFT SWUNG SHARPLY TO THE RIGHT AND PINNED HIS ARM BETWEEN A SUPPORT BEAM AND THE LIFT ROLL CAGE.
EE WAS SQUATTING DOWN WELDING ON A SCREEN FRAME AND LOST HIS BALANCE AND FELL BACKWARD. HE LANDED WITH HIS RIGHT HAND JAMMED IN THE DECKING GRID, RESULTING IN A BROKEN THUMB.
EE WAS WORKING MAINTENANCE ON AIR COMPRESSOR. AS HE CLIMBED DOWN FROM THE DECK-WORK HIS FOOT SLIPPED AND HE FELL, STRIKING HIS RIGHT LOWER BACK ON THE DECK.
1999 · 1 incidente
EE HAD CUT A SECTION OF HOUSING LOOSE FROM A PRODUCT COLLECTOR AS HE WAS PREPARING TO REMOVE THESECTION IT MOVED UNEXPECTEDLY AND PINNED HIS FINGER BETWEEN AN ANGLE IRON HANDLE & A CATWALK-RES ULTS A BROKEN FINGER TIP AND 5 STITCHES ON LEFT RING FINGER
1998 · 1 incidente
EMPLOYEE WAS CLEANING UP IN THE MILL HOUSE WHEN HE STEPPED IN WET MATERIAL ON THE FLOOR AND SLIPPED - STRAINED MUSCLE IN LOWER BACK.
1997 · 1 incidente
EE WAS HELPING HOLD A LARGE PULLEY AS IT WAS DRIVEN OFF A SHAFT - A MISS HIT OF THE HAMMER STRUCK HIS LEFT HAND ON THE LITTLE FINGER SIDE.
1996 · 1 incidente
EMPLOYEE WAS MOVING A BOX AND FELT EXTREME PAIN IN LOWER BACK.
1994 · 2 incidentes
EMPLOYEE WAS BAGGING MILLED MATERIAL IN 50# BAGS AS HE TURNED TO STACK A FINISHED BAG ON A PALLET HE BRUISHED HIS ARM ACROSS THE END OF THE BAGGING SPOUT A SHARP EDGE CUT HIS RT FOREARM NO MAJ OR INJURY INJURY RESULTED IN 12 STITCHES IN HISRT FOREARM
EMPLOYEE WAS ASSISTING PLANT OEPRATOR KNOCK WET MAERIAL FROM TANK, INJURED EMPLOYEE WAS STANDING BELOW AND SLIGHTLY TOT HE REAR OF THE PLANT OPERATORAS THE OPERATOR HAMMERED ON THE TANK-THE HA MMER SLIPPED FROM THE OPERATORS HANDS AND FELL ON THE INJURED EMPLOYEE'S HEAD RESULTING ON A LACERATION REQUIRING SEVEN STITCHES.
1993 · 1 incidente
ELMPLOYEE WAS WALKING TO THE BACK OF HTE SHOP AREA WHEN HE TRIPPED OVER A STEEL PLATE AND STRUCK HIS LEFT ELBOW RESULTING INA HAIR-LINE FRACTURE OF THE LEFT ELBOW.
1990 · 1 incidente
EMPLOYEE WAS REMOVING A WEAR PLATE WHEN HE ACCIDENTLY PRESSED THE TRIGGER OF THE AIR WRENCH WHILE HOLDING THE BOLT HEAD REESULTING IN LACERATIONS OF THE INSIDE OF HIS LEFT THUMB. STITCHES REQU IRED.
1988 · 1 incidente
EMPLOYEE WAS REMOVING A BUVKET PIN FROM A LODRER WHILE REMOVING PIN HE CAUGHT HIS FINGER BETWEEN THE PIN AND LOADER AND RESULTING IN A PINCH CUT TO THE LITTLE FINGER OF LEFT HAND.
1984 · 1 incidente
EMPLOYEE WAS DOING MAINTENANCE WORK ON THE JAW CRUSHER, WHEN A TOGGLE PLATE HE WAS INSTALLING SLIPPED AND PINCHED HIS FINGER BETWEEN THE TOGGLE PLATE AND THE CRUSHER FRAME. HE SERVED THE INDEX FINGER OF THE LEFT HAND AT THE FIRST JOINT JUST BEHIND THE FINGERNAIL.
1983 · 1 incidente
LOADER WAS WORKING ON FIRST BENT FROM TOP IN MUCK PILE OPERATOR WAS REMOVING LG BOULDERS FROM MUCK PILE TO AREA APPROX 150FT FROM PILE TO BE DROP-BALLED AT LATER TIME LPERATOR WAS TURNING AROU ND TO RETURN TO PILE AFTER DUMPING BOULDER WHEN HE NOTICED SOMETHING GREEN UNDER HIS REAR TIRE HE STOPPED AND PULLED UP ABOUT 6FT FOREMAN WAS FOUND LYING ON HIS LEFT SIDE WITH HIS BACK TO LOA