Avísenme cuando se presente un nuevo incidente de la MSHA en Pryor Stone #2.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 21,285 | 6 | 1 | 281.9 |
| 2025 Q3 | 21,175 | 0 | 0 | 0.0 |
| 2025 Q2 | 18,571 | 8 | 3 | 430.8 |
| 2025 Q1 | 20,996 | 4 | 0 | 190.5 |
| 2024 Q4 | 19,347 | 0 | 0 | 0.0 |
| 2024 Q3 | 20,187 | 1 | 0 | 49.5 |
| 2024 Q2 | 18,947 | 0 | 0 | 0.0 |
| 2024 Q1 | 17,480 | 0 | 0 | 0.0 |
Employee was climbing up ladder on haul truck.
Swinging ladder step.
The Employee was trying to remove a loader tooth for a bucket, when the employee used a hammer to hit the tooth a piece of the tooth broke off and flew into the employee's leg.
No lost time under medical diagnosis until 11-13-2019, for possible rotator cuff injury.
The employee was helping change a screen when EE smashed a finger between the old screen being removed and the handrail. The employee received stitches in the middle finger of left hand.
Employee was helping pull a conveyor belt on when the rope broke, hitting EE on the right side of the face. Diagnostic only thru 2/15. Released for light duty on 2/18/2016.
The claimed injury was not reported to the company until 12/23/2013. The injury was a result of horseplay involving individuals' physical contact (punching, shoving, and lifting off the ground). The activity was not work related and resulted in a lower back strain (?) to an employee that previously has had back surgery.
While working on a Cat 773B Haul truck, someone bumped a 50 ton jack that was not under a load. The jack fell over striking the injured's hand and broke two fingers.
While servicing a water pump on a highway drill, a faulty hydraulic motor engaged while the driller was inspecting the belts and pulleys. His three fingers (index, middle and ring) were trapped between the belt and pulley severing the tips to the first knuckle.
While cleaning out the Hazmag Crusher, the injured threw a rock out and caught his finger between the crusher side and the rock, mashing his finger requiring stitches to close.
While dismounting from a Bobcat during rain and muddy conditions, the EE's foot slipped causing him to fall trapping his leg and injuring his right knee. He has continued to work on light duty "Restricted Work Activity" and will be operated on 01/27/10.
Left hand - tips of digit 3 & 4 caught in conveyor belt.
While performing maintenance on the "chips" conveyor, the injured manually advanced the belt & it rolled backward catching the tip of his little finger causing it to be cut requiring stitches & medications.
PLANT OPERATOR WAS CHIPPING ON A HAMMER ON THE SPOKANE CRUSHER. WHEN EE APPROACHED AREA IN HIS PICK UP TRUCK TO DELIVER BOLTS. SOMETHING FLEW INSIDE CAB STRIKING HIS IN EYE. THOUGHT HE HAD REM OVED OBJECT, HOWEVER, PAIN INCREASED AND LATER SOUGHT MEDICAL TREATMENT FOR EYE INJURY.
EE TIGHTENING BOLT ON ROCK CRUSHER. THE WRENCH SLIPPED OFF AND HE FELL BACKWARDS HITTING HANDRAIL. HE CONTINUED FALLING BACKWARDS AND CAUGHT FULL WEIGHT OF BODY ON LEFT WRIST EXTENDED BEHIND H IMSELF TO BREAK FALL ONTO WALKWAY.
EE LIFTING A HEAD OFF OF A 3412 ENGINE WITH ON ELECTRIC CHAIN HOIST AND CHAIN. HEAD WAS NOT BALANCED AND THE CHAIN SLIPPED PINCHING THE EE HIT HAND BETWEEN THE CHAIN AND THE HOOK ON THE ELECTR IC HOIST.
WHILE STRIKING A TRACK RAIL WITH A HAMMER, A PIECE OF THE RAIL CHIPPED OFF AND STRUCK LEFT HAND CUTTING NEAR THUMB.
EE STUCK FINGER INTO A.C. FAN CAUSING CUTS REQUIRING STITCHES TO MIDDLE FINGER OF RIGHT HAND. TRUCK HAD JUST FINISHED INSPECTION BY MSHA NO LESSTHAN 30 MIN. PRIOR TO ACCIDENT.
TAKING HAMMERS OUT OF CRUSHER. PIN CUT THUMB
EE COMPLAINED OF SEVERE CHEST PAINS, WAS TRANSPORTED BY EE TO LOCAL HOSPITAL. AND THEN ON TO TULSA VIA HELICOPTER, AFTER BEING TREATED FOR A HEART ATTACK.