Working on replacing alternator. Went to get bolt, stepped down and lost footing. Fell, landed on back, broke 3 ribs.
Nason Plant #1 Metal/Non-Metal
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Nason Plant #1.
- Muertes
- 0
- Incidentes totales
- 17
- Años en registro
- 2000–2019
- Último incidente
- Jun 2019
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 13,574 | 0 | 0 | 0.0 |
| 2025 Q3 | 13,192 | 3 | 0 | 227.4 |
| 2025 Q2 | 12,244 | 0 | 0 | 0.0 |
| 2025 Q1 | 15,254 | 6 | 2 | 393.3 |
| 2024 Q4 | 15,050 | 0 | 0 | 0.0 |
| 2024 Q3 | 15,222 | 5 | 1 | 328.5 |
| 2024 Q2 | 24,956 | 0 | 0 | 0.0 |
| 2024 Q1 | 22,927 | 4 | 1 | 174.5 |
Incidentes reportables
17 en archivo2019 · 1 incidente
2017 · 1 incidente
Slipped on dragline hurt back. But didn't report it until Tuesday May 30th 2017.
2013 · 1 incidente
Truck driver crawled in trailer to clean access material from trailer.
2012 · 1 incidente
EE was working on the dragline... slipped and fell on the catwalk landing on his left elbow.
2011 · 1 incidente
EE was breaking Flexco lacings off the conveyor belt with a Flexco chisel and a hammer. A piece of the hammer shattered as he was striking the chisel and a piece went into his abdomen.
2007 · 2 incidentes
EE was replacing some lacings on his conveyor belt. He was using a hammer and chisel to split the lacings, when a small piece of the hammer broke off and struck EE in the left chest.
EE slipped when exiting the conveyor ladder, causing skin to be taken from his lower left leg. Initial first aid/wound care was given at time of reporting to his supervisor. EE refused to go to te doctor at that time.
2006 · 2 incidentes
EE fell off ladder while working on plant. EE fractured right wrist.
EE turned to get wrench and hit his elbow on the door latch.
2005 · 1 incidente
EE slipped on a conveyor catwalk and hurt knee.
2003 · 2 incidentes
while driving out a pin, a piece of steel came off and stuck into left hand
EE WAS INJURED WHILE WORKING ON A CONVEYOR. WE WERE ADJUSTING ROLLERS BECAUSE WE HAD JUST PUT A NEW CONVEYOR BELT ON. EE SAW SOME MUD ON THE BOARD ROLLER ON THE TENSIONER & HE REACHED INSIDE THE GUARD TO CLEAN IT & THE BELT GRABBED HIS ARM & PULLED IT BETWEEN THE ROLLER & THE BELT. I HAD JUST TAKEN THE LOCK-0UT OFF SO WE COULD TURN THE BELT ON TO ADJUST ROLLERS.
2002 · 3 incidentes
FEET WERE SOAKED FROM DAYS PRIOR AND THIS DAY WHILE WORKING IN AND AROUND RECENT FLOOR WATERS. POSSIBLE CONTAMINATION CAUSED CELLULITIS.
WALKING DOWN CONVEYOR-FOOT SLIPPED AND KNEE POPPED.
ACCESSING DRAGLINE HE STRAINED A MUSCLE.
2001 · 1 incidente
REMOVING MOTOR FROM OLD CONVEYER TO INSTALL NEW ONE, CONVEYER FELL WITH EMPLOYEE ON IT. ALL SAFETY PROCEDURES WERE BEING FOLLOWED.
2000 · 1 incidente
CHANGING SCREENS ON SHAKER. FRACTURED ONE LEFT RIB.