Avísenme cuando se presente un nuevo incidente de la MSHA en Campbells Creek No 7 Mine.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2012 Q2 | 0 | 0 | 0 | |
| 2012 Q1 | 24,679 | 10 | 3 | 405.2 |
| 2011 Q4 | 37,206 | 26 | 10 | 698.8 |
| 2011 Q2 | 0 | 11 | 3 | |
| 2011 Q1 | 0 | 10 | 2 | |
| 2010 Q4 | 1,307 | 10 | 1 | 7651.1 |
| 2010 Q3 | 2,038 | 24 | 3 | 11776.3 |
| 2010 Q2 | 41,786 | 11 | 1 | 263.2 |
An unplanned fire occurred on the roof bolt machine after welding operations. The initial hot spot check was clear, but upon returning for the second check the fire was discovered and extinguished with 12 minutes.
Supplying roof bolter and a rock fell on his hand and smashed it.
An unintentional roof fall occured on the above date at break 23 in the return. The fall did not impede travel nor ventilation and no one was injured. The fall measured 40ft. long, 19ft wide and 6ft heigh.
Section foreman was conducting pre-shift exam for 3rd shift, when a rock fell from between the bolts striking him on top of the head. EE started missing work on Monday September 6 from his injuries.
The injured was using a slate bar to position a track rail as it was being pulled off the rail car. When the rail came off the car the slate bar landed on his right foot causing a fracture.
On the above date, EE was working on the company 610 scoop checking permissibility. He had finished adjusting the brakes and was putting the shield back on. As he pulled the shield, he felt a sharp pain in his lower abdomen. He went to the doctor on Monday and was diagnosed with a hernia.
EE had helped setting the MRS's up in the No 5 entry when the right rib rolled off striking him in the right leg.
Injury was driving a rubber tire ride along No. 4 beltline. His right front tire caught a rock which kicked his front tires to the right. This action caused the knob/ball on the steering wheel to hit the base of his right thumb.
The injured was cleaning an entry with a scoop. He backed out of the way for a shuttle car to pass, when another shuttle car came around the corner and ran into the back of his scoop. The injured didn't start missing work until 09/02/2009.
Individuals involved were loading bulk dust in the scoop bucket with a forklift. The injured employee was attempting to cut the bulk just when the forklift operator pushed the tram pedal to reposition the forklift. The pallet struck the employee in his right leg.
The injured was tramming a scoop when he hit some bumps in the mine floor. These bumps jarred the injured, causing pain in his lower back. The injured continued work until the pain became too much. He started missing work on June 1, 2009 from the injury.
Injury was in the process of setting a belt head when the head became caught on a belt chain. The injured tried to free the head by using his hands. This resulted in a caught between injury that resulted in fracture to the left index and right index and middle fingers
Employee was diagnosed with CWP.
Employee hurt knee about 3 weeks ago; continued working. He originally hurt knee by stepping on a water line & falling.
An unintentional roof fall (above anchorage) was found 500 ft out by the east mains section in one of the intake air entries. The fall was approx. 30 ft. long, 6 foot thick, and 19 ft. wide. The area will not be cleaned, all aproches are cribbed and dangered. The fall did not affect ventilation nor block the travel of the escapeway.
An Unintentional roof fall has occurred on the 002-0 MMU in the 4 left crosscut. The fall started in the unbolted area and continued out into the intersection. The approx. lenght of the fall is 60 ft. and 5 ft. high and the width of the intersection. No injuries occurred as a result of this fall.
Injured was in the process of helping to set timbers on a pillering section. The injured and a co-worker had set a timber and were begining to set another, when the first timber fell, striking the injured on the right ear. This resulted in 11 sutures.
Injured was standing behind a co-worker who was breaking the metal bands on a bundle of roof bolts. The co-workers grip slipped, this resulted the the co-workers elbow striking the injured in the mouth. The injured cracked one tooth, that was repaired on 4-3-08
Inured was in the process of moving Miner cable on 3-18-08, left work without reporting incident. Injured had a doctor?s visit on 04/23/08 with Dr. Frederick Armburst in which he was diagnosed with a intervertebral Disk Injury that was musculoligamentous in origin.
Helping electrican make splice on shuttle car cable, employee cut his right thumb.
Injured was exiting shuttle car and stepped awkwardly on a rock. Felt a burning sensation in left knee, injured continued to work until 4/4/08. Injured's last day worked was 4/4/08.
Employee was operating a continuous miner in #7 entry at spad #681 when a rock measuring 4 x 4 x 5 inches thick struck him in the head. The rock slid down right arm onto the back side of legs knocking him unconscious.
Employee was hanging section feeder cable when a piece of rock fell striking him on the hard hat and face.
A roof fall was discovered on the above listed day and time. It is in the intake entry and measures approximately 6' H x 20' W x 70' L.
Employee was trying to use the head wrench on a roof bolter to bend a roof bolt when the head sprang off the roof bolt causing the roof bolt plate to strike his right hand.
Employee was loading a piece of track rail on a rail car and it slid off striking him on the left ankle.
EE was standing on top of shuttle car hanging cable and slipped and fell to the mine floor.
Employee was getting out of mantrip when the operator started tramming forward. The movement of the matrip caused EE to fall to mine floor.