Alden Portable Plant #1: 59 citaciones de la MSHA Metal/Non-Metal

EMPLOYEE WAS HELPING PUT A DECK BACK IN A SCREEN. WHEN THE DECK SLID INTO PLACE IT PINCHED THE EE'S THUMB AND TORE THE SKIN OFF THE END.

EE ALLEDGEDLY TRIPPED ON A POWER CORD. HE FELL LANDING ON BOTH HANDS AND COMPLAINED OF A SORE RT. WRIST. HE DID NOT INFORM MANAGEMENT OF HIS INJURY UNTIL THE FOLLOWING DAY 9/20/02. HE WAS EXAMINED BY A LOCAL DR. & GIVEN A WRIST BRACE & A 10 LB. WEIGHT RESTRICTION FOR SEVEN DAYS.

EMPLOYEE ALLEDGES HE WAS CLIMBING OUT OF A CASE SKID STEER LOADER WHEN HE TRIPPED ON HIS SHOE LACES OR THE LOADER BUCKET AND STRAINED HIS BACK. EMPLOYEE REPORTED THE ACCIDENT ON 06/02/99.

EE WAS CLIMBING DOWN A LADDER TO GET A SCREEN RUBBER. HE WAS CLIMBING DOWN THE SCREENING PLANT LADDER WHEN HE LOST HIS HAND GRIP ON THE LADDER. HE FELL APPROX SIX FEET, LANDED ON THE GROUND, A ND BROKE HIS RIGHT HEEL IN THE PROCESS.

EE WAS PLACING GUARD FOR HAMMER WILL DRIVE SHAFT INTO POSITION. GUARD SLIPPED OUT OF EE RIGHT HAND AND PINCHED AND BROKE HIS LEFT THUMB IN A PINCH POINT. I AM TRYING TO REMOVE HIS HAND FROM TH E PINCH POINT, THEEE TWISTED HIS ALREADY BROKEN THUMB.

EE WAS REPLACING HAMMMER MILL TIPS BY POUNDING ON THEM WITH A HAMMER. A CHIP FROM THE EE'S HAMMER BROKE OFF AND STRUCK THE EE INTHE LOWER RIGHTCHEST AREA UNDER THE RIB CAGE. THE EMBEDDED CHIP WAS EXAMINED BY 2 DRS WHO RECOMMEDED LEAVING THECHIP EMBEDDED.

EMPLOYEE WAS REMOVING ROCK FROM CATWALK. RACK ROLLED AGAINST CAT WALK FRAME AND SMASHED EMPLOYEE'S RIGHT THUMB.

EE WAS WALKING AFTER PANTS WHEN HE SLIPPED ON SNOW COVERED ICE STRAINING HIS LOWER BACK. THE CONDITION HAS CONTINUED TO RECIVED CAUSING THE EE TO SEEK MEDICAL ATTENTION ON 7-20-95. AT THIS TIM E HE WAS PLACED ON WORK RESTRICTIONS FOR LIFTINGAND MOVEMENT.

EMPLOYEE WAS PREPARING TO CUT A STEEL PLATE WITH A CUTTING TORCH WHEN A PAINT CHIP ERUPTED FROM THE PLATE SURFACE.THE CHIP BLEW UNDER THE CUTTING SHIELD & EMPLOYEE'S SAFETY GLASSES & EMBEDDED ITSELF IN HIS PUPIL OF HIS RIGHT EYE.

THE EMPLOYEE WAS APPARENTLY WALKING TOWARDS HIS STOCKPILE TRUCK AND STEPPED INTO THE PATH OF ANOTHER TRUCK WHICH WAS BACKING UNDER A BIN. THE EMPLOYEE SUFFERED A COMPOUND FRACTURE TO HIS LEFT LEG, A COLLAPSED LUNG, AND SOME BROKEN RIBS.

EMPLOYEE HAD OPERATED A DOZER FOR TWO DAYS. AFTER THE SECOND DAY HE COMPLAINED OF LOWER BACK PAIN.

HELPING REMOVE SHAFT FROM CRUSHER USING HOIST IT SHIFTED PINNED HAND BETWEEN SHEAVE AND PTO SHAFT

EE STATED THAT HE BENT OVER TO HEAT THE LOCK ON THE GATE SO HE COULD UNLOCK IT. WHILE DOING THIS HE STATED HE STRAINED HIS LOWER BACK.

EMPLOYEE STATED THAT HE WAS TRYING TO FREE A JAM UP INT HE PRIMARY WITH A CHAIN AND FELT SOME PAIN. HE STATED THE PAIN BECAME WORSE THE NEXT DAY FROM BOUNCING IN THE LOADER. HE WAS DIAGNOISE D AS HAVING A HERNIA.

EMPLOYEE WAS CLIMBING OUT OF HIS TRUCK WHEN HE SLIPPED AND STRUCK HIS ELBOW ON THE STEP, INJURYING HIS RIGHT ELBOW.

EMPLOYEE WAS CHANGING DILL STEEL WHEN COUPLER FELL OFF HAMMER AND ONTO HARD HAT AND BACK, BRUISING HIS BACK.

EMPLOYEE WAS STEPPING OFF PLANT AND GOT LEG CAUGHT ON A GUARD WHILE HE WAS STEPPING DOWN TWISTING KNEE ON LEFT LEG.

EMPLOYEE WAS BURNING TRASH. AS EMPLOYEE WAS SCRAPING BURNING SCRAPS TOGETHER AN AEROSE CAN EXPLODED. THE CAN WAS A CRC PENETRATING OIL CAN. HIS RIGHT FOREARM WAS 60% COVERED WITH BURNS.

EMPLOYE WAS TRANSFERING ROCK FROM ONE PAN TO ANOTHER PAN FOR DRYING AND TESTING WHEN SHE EXPERIENCED A SHARP PAIN IN HER SHOULDER AND NECK.

EMP. WAS ASSISTING IN THE REPLACEMENT OF A CONVEYOR BELT WHEN HIS FOOT SLIPPED AND HE FELL BETWEEN THE CATWALK AND BIN. THIS RESULTED IN CUTS TO HIS LEFT FOREARM AND BRUISED BIG TOE REQUIRE D FOUR STITCHES TO CLOSE WOUND.

EMP WAS LIFTING3DRILL HAMMERS FROM PICKUP TO DRILL UNIT AND PULLED A MUSCLE IN HIS BACK