Amrize Morrison Quarry: 399 citaciones de la MSHA Metal/Non-Metal

Employee was entering the wash tunnel. Employee lost their footing on staircase and fell forward impacting their hand on the concrete floor.

Employee was walking to the shop door which was locked so employee walked around to the south side of the shop and slipped and fell on ice hitting head and straining shoulder.

Employee was standing on a ground level catwalk, swapping out frozen water lines to the dust suppression system, when EE stepped backward rolling EE's ankle causing a fracture and dislocation to the ankle.

Employee attempted to manually roll and lift rock out of haul road. Employee reported to Employer injury after end of shift, employee sent for medical evaluation following morning.

Employee was removing the cap screw on the filter housing of the HP 300 cone crusher using a 36" aluminum pipe wrench. The wrench slipped off the nut causing the employees hand to strike a stationary object.

The operator of the base plant was standing on the guarded platform guiding the backhoe operator to place the rock breaker on the rock jam. The plant operator signaled the backhoe operator to swing to the left and it would not stop. The rock breaker struck the plant operator on the left cheek. EE fell down 4 stairs and injured.

Assembling slide sledge tool for use and caught finger between tool and service truck bed.

A miner was exiting a MCC connex which consisted of 1 step down to ground level. The Miner mis-stepped on the level ground and rolled EE's ankle.

The Miner was assisting another miner carry a 80 pound screen bearing from a storage conex to a cart for transport to the work location. The bearing started to slip off the cart, as it was moving the miner stepped back to avoid being struck by the bearing. As they stepped back steel protruding from the conex struck their left leg just above the top of their boot.

Employee was climbing ladder to enter loader and stumbled, they reached out to catch themselves and cut their right ring finger

Hernia when lifting a bead flange for a Cat 980

Employee was handling a piece of wear steel and cut though company issued leather gloves cutting right index and middle fingers requiring stitches.

A retest confirmed a Standard Threshold shift for employee in the left year

EE positioned company f-150 truck behind a reversing 980M loader without alerting or making any eye contact with the loader operator. The counterweight on loader struck the right front fender but pickup was drivable. No injury was reported by EE the day of the incident nor the next day. The first report of an injury by EE was late the next day. January 17,2017.

EE stood up from a knelt position while repairing a conveyor belt and felt a small amount of pain in right knee. EE then climbed into the ford F-350 service truck and once ee place heel on the floor board ee felt a pop in right knee.

Flashburn on eyes due to welding in truck bed

Gust of wind came up while employee was inspecting screens and dust got under their safety glasses and they got a small piece of debris in their eye.

The driver was trimming EE's load on an end dump trailer. EE closed the tailgate using the in cab controls and then went to the back tailgate to clear the seal so the tailgate could shut. EE placed EE's hand on the dog ear on the tailgate when the tailgate closed on EE's left hand crushing EE's hand and causing a laceration to EE's hand.

Changing screens hit elbow on steel cross member of screen

Employee was stepping down off of a ladder when he stepped on a rock causing his ankle to roll, spraining his ankle.

Individual was cutting flashing and the blade slipped, cutting the bottom part of the thumb. The cut required 3 stitches.

Employee was changing screens and got the tip of his right ring finger pinched underneath the screen railing, causing the finger to bruise and swell. Injury was reported and the employee was taken to Concentra to get finger looked at, x rays were taken and the tip of the right ring finger was broken.

The miner was installing screens on the bottom deck of a rinse screen. As he was swinging the hammer hit the cross member above deflecting the hammer striking his left middle finger causing a fracture to the tip of that finger. The impact of the hammer chipped the bone on the end of his finger.

Employee slipped on ice while working in the plant and injured his shoulder.

Employee, blaster, was dewatering blast holes, when he went to lower the dewatering pump into a blast hole a worn spot on the dewatering hose showing metal cords caught his middle right hand finger. He tore the skin in a v shape 1/2" by 1/2". Employee was sent to the clinic and had 5 stitches to close up the wound.

Employee told to shovel bottom steps under bins. He was pulling shovel and scraping when he pulled a muscle. Employee to aggressive for the task at hand. Need to scope, not pull.

Employee was holding a piece of steel (crusher mainframe liner) underneath crusher #2. The piece of steel was held on to the mainframe by some welds. As the other non injured employee was cutting it off, the steel recoiled and pushed injured employee's arm back into his shoulder.

Employee was climbing a ladder. As he got to the 4th rung, the ladder slipped out from underneath him. He tried to grab a picking eye to regain balance but could not do so and slid to the ground.

Employee came into my office on the 2nd of Aug. complaining of irritation in his eye that happened on the 1st of Aug.

Replacing idler on CB2 tail section. As EE was tryng to line up the idler frame with the conveyor frame, the idler slipped off the frame hitting EE's finger.

Employee was kneeling on CBI, throwing rocks off. He lost balance and fell landing feet first.

Employee was lifting a 5 Gal container, shoulder height. As he lifted the container he felt a small twinge in his left forearm.

EE was stepping out of the cat 226B skidder with the bucket full of material and with the lip of the bucket tip up in the air. As he stepped out he tripped on the bucket and fell to the ground.

Ee was walking out of cb2 tunnel when he slipped on ice.

As employee was removing guards, he planted his foot on some mud/fines. His foot sank, quickly losing balance, shifting his momentum forward, resulting in employee striking the top of his hard hat against the plant structure.

EE was assisting another employee in removing bucket from skid loader. Bucket pins were stuck. Lifted bucker approx 6" in air & struck handle with hammer. Lower pin released, bucket swung forward, came off upper bucker receptical & swung forward approx 12" - 16" landing on ee's right foot.

Employee was pulling on a bar that became stuck. As he pulled back on the bar, it came loose and he trapped his thumb in between 2 bars.

EE called and informed us that he was going to see a doctor because he is having pain in his elbow. He stated that it was a persistant pain in his right elbow that has occurred over time, due to welding.

EE lifted large rock. Felt sharp pain in shoulder (left) approx. 1 hr. later.

EE was resting a 20 am motor on a handrail while still confected to the pully system, as employee tryed to move motor to the ground. The motor slipped off the rail pinching his hand in between the hand rail and the motor shaft.

EMPLOYEE HURT HIS LEFT FOREARM WHILE HE WAS ALIGNING A CRUSHER FRAME, USING A PRY BAR TO SHIFT IT INTO PLACE TO ALIGN BOLT HOLES.

EMPLOYEE SLIPPED WHILE CLIMBING DOWN STAIRS. FELL 1 STEP TO CATWALK AND BRUISED CHEST. RESTRICTED DUTY. * EMPLOYEE REPORTED INJURY ON 4/27/05 AND REQUESTED TO SEE DR. 4/28/05*

DARK CONDITIONS BACKING UP TO DUMP, MISJUDGED TRUCK PLACEMENT & BACKED INTO SIX FOOT HIGH BERM & FLIPPED THE TRUCK OVER. EMPLOYEE FAILED TO WEAR HIS SEAT BELT & WAS INJURED AS A RESULT.

Employee was working on his drill hammer. He bent down to stand it up on end when he had a sharp pain to his lower back.

Employee turned to speak with supervisor, slipped on ice and fell down. Note: employee worked 11/30 to 12/01, saw physician on 12/02; work restricted 12/02 to 12/04/04.

While stacking metal grating pinched finger between grating.

EE GOT AIRLINE DEICER IN HIS EYES HAD IRRITATION AND WAS GIVEN RX AT CARE PROVIDER TO ELIMINATE IRRITATION AND THEN RET'D TO WORK. EE WAS WORKING WITH ALL OF HIS PPE ON AT THE TIME OF ACCIDENT

CUTTING AND GRINDING STEEL THROUGOUT THE DAY, WHEN THE EE GOT HOME AFTER HIS SHIFT HAD SOMETHING IN EYE BOTHERING HIM AND CALLED SUPERVISOR.

DRILLING NEAR EDGE WHEN BANK FAILED, PARTIALLY TURNING DRILL ON SIDE.

CHAIN SPRINGS ON SPRING PORTA POWER SITTING ON WOOD BLOCK, WOOD BLOCK FAILED LETTING PORTA POWER SLIP, SCREEN DROPPED STRIKING HAND.

EE WAS CLIMBING IN AND OUT OF CONVEYOR TO REPLACE RETURN ROLLERS.

TWO MEN WERE LIFTING A SCREEN BEARING USING A BAR THROUGH A BOLTHOLE. UPON LIFTING, THE BAR SLIPPED OUT OF THE HAND CAUSING THE BEARING TO FALL ON HIS FOOT. THE IMPACT CAUSED A CONTUSION OF TH E RIGHT FOOT. X-RAYS SHOWED NO FRACTURES.

WHILE PULLING ON A COMEALONG THE CHAIN BROKE CAUSING THE HANDLE TO RELEASE. HIS HAND JERKED BACK AND HE STRUCK HIS ELBOW ON THE FRAMEWORK BEHIND HIM.

WHILE SPLICING CONVEYOR BELT SLIPPED WITH UTILITY KNIFE AND JABBED WRIST.

OPERATING DOZER - REPETITIVE MOTION. EE NEEDS THERAPY 3 TIMES PER WEEK FOR 2 WEEKS & RECHECK.

EE WAS WALKING ON UNLEVEL DIRT DRIVE WHEN HE SPRAINED HIS ANKLE.

EE WAS REMOVING RETURN ROLLER FROM UNDER SCREEN RETURNS. HE LIFTED ROLLER. HIS FINGER WAS SMASHED BETWEEN THE ROLLER AND SCREEN AXLE. EQUIPMENT WAS NOT OPERATING AT THE TIME.

EE WAS CRAWLING UP ON A CONVEYOR BELT WHEN HIS PANT LEG GOT CAUGHT ON THE FRAME. HE FELL BACK ON THE HANDRAIL LANDING ON HIS LEFT SIDE.

EE WAS WALKING FROM THE SHOP TO CAR WHEN HE SLIPPED ON THE ICE AND SNOW.

EMPLOYEE WAS MOVING SMALL TIN BOX HAT CONTAINED WELDING ROD HOLDING BOX BY HOLE CUT IN TOP. BOX SLIPPED FROM HIS HAND CUTTING LEFT INDEX FINGER.HE RECEIVED THREE STITCHES.

IT WAS DARK, EE WAS CLIMBING OFF OF A 773B CAT HAUL TO TAKE A BREAK. BENDING OVER TO GO DOWN THE LADDER ANTENNA POKED HIM IN THE RIGHT EYE. SAFETY GLASSES WERE NOT USED.

EMPLOYEE WAS CUTTING THE TOP OF A PLASTIC BOTTLE WITH A BELT. PULLING THE KNIFE TOWARDS HIMSELF. HE SLIPPED AND STABBED HIS LEFT FOREARM.

HOISTING CRUSHER PARTS WITH HYDRAULIC BOOM & CHAIN, EE WAS HOLDING ON TO CHAIN WHEN PICKING EYE BROKE OFF OF PART STRIKING EE'S HAND & WRIST.

EE POURED GAS ON A SMALL PILE OF WOOD, LEAVING TO GET A LIGHT, RETURNED A FEW MINUTES LATER LIGHTING THE FIRE, THE FUMES AROUND THE AREA IGNIGHTED BURNING HIS HAND AND ARM.

HAND PAIN.

EE WASS CONDUCTING PRESHIFT INSPECTION ON HAUL TRUCK. TRIPPED ON EDGE OF 3/6" STORE PILE. EE SUFFERED CONTUSION ON RIGHT SHOULDER.

DRAIN PLUG WAS TIGHT. EE WENT TO GET A WRENCH, USED A "CHEATER PIPE" INSTEAD. APPLIED PRESSURE AND SLIPPED. EE LACERATED HAND ON THE JAGGED EDGE OF THE PIPE. RECEIVED 6 SUTURES TO LEFT HAND (O N PALM.

EE WAS CUTTING CONVEYOR BELT, SLIPPED AND CUT HAND.

EMPLOYEE WAS CUTTING PASTIC TIE FROM AN EXTEN- SION CORD USING A POCKET KNIFE; HE CUT THROUGH TIE AND LACERATED LEFT PALM.

2 EMPLOYEES WERE CHANGING BUCKET ON CAT BACKHOE 426B. A THIRD EMPLOYEE APPROACHED WORK SCENE AND IN OPERATION. THE SECOND EMPLOYEE WAS SEARCHING FOR PLUGS IN THE CAB AND ACCIDENTLY, ENGAGED THE BOOM SWING LEVER. THE 3RD EMPLOYEE MOVED BACKWARD AS THE BOOM CAUSE FORWARD PUSHED HIM ALSO STRIPPED OVER A CUTTING EDGE LYING ON THE GROUND EMPLOYEE FELL ON HIS HIP.

EMPLOYEE COMPLAINED OF PAIN IN RIGHT ELBOW.

EE WAS REMOVING A SMALL SCREEN FROM AN AGGREGATE SHAKER WHEN HE CAUGHT HIS THIRD FINGER LEFT HAND ON SHARP EDGE.

EE AND OTHER WERE CLEANING UP PLANT AREA PUTTING. USED SCREEN ON BACK OF FLAT BED TRUCK. EE SMASHED HIS FINGER BETWEEN SCREEN AND ROLLER ON TRUCK.

WHILE COMING OFF CONVEYOR CB7 TO CRUSHER DECK #2, EE STEPPED ON STONE AND TWISTED FOOT.

WHILE GETTING OFF 426 CAT RUBBER TIRE BACKHOE EE'S RIGHT FOOT SLIPPED OFF STEP CAUSING LEFT LEG TO HIT BACKHOE

OPERATOR WAS HELPING FULE SHOVEL & WAS STANDING ON EXPANDED METAL BED OF FUEL TRK & WHEN HE TURNED HIS FEET SLIPPED CAUSING HIM TO FALL FROM BEDOF TRK APPROX 4 FT TO GROUND Y

WHILE HOISTING SCREEN UP TO #1 SCREEN TOWER, SCREEN WEDGED AGAINST HANDRAIL. WHEN EMPLOYEE FREEDIT, TENSION ON SCREEN CAUSED SCREEN TO JUMP AHEAD AND PUSHED EMPLOYEE INTO FRAME OF SCREEN. THIS CAUSED CONTUSION TO LOWER RIGHT BACK/BUTTOCK.

WHILE LOWERING ARM GUARD INTO PLACE WITH COMEALONG AND CHAIN WHEN EMPLOYEE TUGGED ON SUSPENDED, THE BAR SLIPPED AND DROPPED DOWN CAUSING BAR ANDCOMEALONG TO HIT EMPLOYEE KNOCKING OFF HARD HAT AND CUTTING HIS HEAD TOP RIGHT SIDE.

WHILE STEPPING OUT OF WATER TRUCK EMPLOYEE STEPPED FROM STEP TO GROUND. GROUND WAS UNEVEN AND EMPLOYEE SPRAINED HIS ANKLE WHEN FULL BODY WEIGHT WAS APPLIED.

EE WAS CLEARING A CHUTE ABOVE SYNTRON FEEDER IN SURGE TUNNEL WHEN BREIDGED MATERIAL CAME LOOS. A ROCK ROLLED OVER TOP OF SHOVEL HITTING HIS LEFT FOREARM CAUSING CONTUSION. EE REPORTED INCIDENT . THERE WAS NO BROKEN SKIN & EE FINISHED SHIFT. ABLE TO CONTINUE WITH WORK. THE FOLLOWING MONDAY ARM WAS STILL SORE & EE WAS SENT TO DR. WHO DIAGNOSED INJURY AS CONTUSION TO LEFT FOREARM.

SUPPORT GAVE WAY UNDER MACHINE. FINGERS GOT CAUGHT BETWEEN TIRE AND WHEEL SMASHING THE TIPS OF THREE FINGERS.

WHILE EE WAS STANDING ON HANDRAIL BESIDE SCREEN CHECKING SCRRENS FOR MUDE, HE SLIPPED AND FELL APPROX. 11' TO GROUND, LANDING ON HIS HEELS FRACTURING BOTH LEFT AND RIGHT HEEL.

EE GOT FINGER IN PINCH POINT BETWEEN STEEL WEAR PLATE AND SUPPORT TUBE WHILE INSTALLING PLATE INTO FEEDER. EE RECEIVED LACERATION REQUIRING 5 STITCHES ON LEFT RING FINGER.

TWO EES WERE MAKING SIDE BOARDS FOR TRUCK. INJURED WAS HOLDING BOARD FOR OTHER EE WHO WAS CUTTING NOTCH IN BOARD WITH RADIAL POWER SAW. INJURED WAS HOLDING IT 6-12" AWAY FROM NOTCH WHEN SAW CA ME OUT OF NOTCH AND CAUGHT GLOVE AND FINGER, RESULTING IN AMPUTATION.

EE HAS COMPLETED WORK FOR THE EVENING & WAS WALKING TO HIS VEHICLE IN PARKING AREA WHEN HE SLIPPED & FELL ON SNOW & ICE. IT WAS SNOWING AT THE TIME OF ACCIDENT. WHEN EE FELL HE LANDED ON LEFT SIDE OF HIS BACK & CRACKED HIS LEFT 8TH RIB.

EMPLOYEE WAS LIFTING CHUTE COVER UP AND HOLDIN GIT WHILE ANOTHER EMPLOYEE WAS ATTEMPTING OT UNPLUG CHUTE. EMPLOYEE WAS DIAGNOSEE WITH A THORIC STRAIN.

EMPLOYEE WAS STANDING NEXT TO AN ELEVATED WALKWAY THAT HAD AND ELECTRICAL CABLE ATTACHED TO IT. WHILE ATEMPTING TO REMOVE THE CABLE FROM THE WALKWAY, SEVERAL OF THE TIES THAT ATTACHED THE CABL BE TO THE WALKWAY BROKE & ALLOWED THE CABLE TO STRIKE EMPLOYEE.

EE WAS REPAIRING A ROCK BREAKER AT THE PRIMARY CRUSHER DUMPSITE. HE STEPPED ON A ROCK AND TWISTED HIS FOOT WHICH CAUSED A FRACTURE IN HIS ANKLE.

WITH ENGINE RUNNING HE WAS CHECKING FOR LEAK IN RADIATOR HOSE. LEFT HAND WAS HIT BY FAN.

EE SUFFERS FROM CARPAL TUNNEL SYNDROME SO THE EXACT DATE OF HIS INJURY IS UNCLEAR. HIS FIRST CORRECTIVE SURGERY WAS ON 11/14/95.

EE HAND SLIPPED OFF OF HIS WRENCH WHILE HE WAS TIGHTENINING A BOLT.

ALLEGED BILATERAL CARPAL TUNNEL SYNDROME CAUSED BY USING COMPUTER KEYBOARD.

EE WAS SERVICING A FRONT END LOADER AND THE STEP ON THE LOADER BROKE CAUSING HIM TO STRIKE HIS LEFT KNEE ON THE SIDE OF THE LOADER. KNEE PAIN PERSISTED AND SURGERY WAS PERFORMED ON 9-19-94.

SMASHED FINGER WITH A HAMMER.....

WHILE MOUNTING NEW FEEDER GATE IN THE RECLAIM TUNNEL, THE LOAD SHIFTED & SMASHED HIS RIGHT INDEX FINGER.

PORTA-POWER HYD JACK POPPED OUT FROM BETWEEN WORK AREAS AND STRUCK INJURED ON HIS HARD HAT AND THE HART HAT SUSPENSION BAND CAUSED A LACERATION TO HIS FOREHEAD.

WHILE CLEAN DIRT FROM UNDER SCREENS A LARGE PIECE OF FROZEN DIRT BROKE FREE STRIKING THE LEFT LEG. THE RESULT WAS THAT THE FIBULA BROKE AND LIGAMENTS WERE TORN.

EE WAS TREIEVING A LENGTH OF DRILL STEEL DURING A RAIN/SNOW STORM WET CONDITIONS CAUSED SOME ROCK TO DISLODGE FROM ACTIVE HIGHWALL ONE ROCK STRUCK EE ON THE BACK AS HE WAS PREPARING TO LOAD ST EEL INTO LOADER BUCKET

SMASHED RT. INDEX FINGER WILE CLEARING CRUSHER HOPPER FILLED WITH ROCK.

EMPLOYEE SLIPPED WHILE DISMOUNTING FROM DOZER

EMPLOYEE WAS REMOVING A STEEL SHAFT FROM THE VISE ON THE BANDSAW TABLE. THE SHAFT FELL OFF TABLE AND LANDED ON EMPLOYEE'S RIGHT FOOT BEHIND AND ON STEEL TOE. THE EMPLOYEE'S RIGHT GREAT TOE WAS FRACTURED.

TRUCK ROLLED OVER SLID DOWN FACE 2 FRACT VERT POSSIBLY OTHERS

THE ABOVE DATE IS WHEN COOLEY GRAVEL CO. AGREED TO PARTIAL PAYMENT OF AN ALLEGED BACK INJURY FROM 9-1-90 (NO LOST TIME). THE EMPLOYEE HAD AN INJURYAND SURGERY IN 1977 PRIOR TO EMPLOYMENT BY CO OLEY. HE WORKED UNTIL 4-14-92 AND LEFT WITH PAIN. HE SAW OUR WORKMANS COMP DOCTOR IN JUNE AND THE FINDINGS WERE NOT CONCLUSIVE THAT THE ACCIDENT CAUSED THIS LOST TIME INJURY.

INJURED WAS OPENING THE DOOR ON THE REICH DRILL ADN TWISTED HIS LOWER BACK. HE HAS A MODERATE LOWER BACK STRAIN.

STEPPPING OFF DOZER INTO LOWER AREA JARRED BACK

INJURED WAS STNAINDG NEXT TO ANTOHER EMPLOYEE'S TRUCK WITH HIS HAND NEAR TIALGATE. THE OTHER EMPLOYEE CLOSED THE TAILGATE ON HIS RIGHT THUMB. ACCORDING TO DR. REPORT HIS THUMB WAS SPRAINED A ND BRUISES WITH SLIGHT CUT.

INJURED WAS TIGHTENING UP A HOSE ON THE COMPRESSOR OF THE DRILL AND STRAINED HIS LOWER BACK WHILE PULLING ON THE WRENCH.

EMPLOYEE GOT FOREIGN MATTER IN LEFT EYE. HE DIDN'T KNOW WHEN, WHERE, OR HOW HE GOT IT. PROBABLY DIRT.

EE WAS WALKING DOWN STEPS OF 1 TOWER AND SLIPPED TURNING HIS ANKLE ON LAST STEP STEPS DID NOT HAVE SNOW OR DIRT ON THEM THE DR ON HIS 1ST VISIT STATED IT WAS SPRAIN THEY CALLED THE NEXT DAY AN D SAID HIS LEFT FIBULA WAS FRACTURED.

EMPLOYEE WAS WELDING MAIN-FRAME LINERS IN CRUSHER. HIS EYES DIDN'T BOTHER HIM UNTIL HE WENT HOME. HE APPARENTLY RECEIVED FLASH BURNS EVENTHOUGH HE USED A PROPER WELDING HOOD. NO PERMANENT INJU RY AND MISSED NO WORK.

HE WAS CHANGING A SCREEN ON TOP DECK #1 SCREEN. A FOREIGN OBJECT BLEW OR FELL INTO HIS LEFT EYE.

EMPL SLIPPED IN MUD WHILE WALKING AROUND FUEL TRUCK PREPARING TO JUMP START IT. HE TWISTED BACK & NECK IT HAD SNOWED CASUING MUDDY CONDITIONS.

EMPL CHANGING OIL ON DOZER.LOOSENING BOLT,THE BOLT WAS TIGHT AND HAD IT DOUBLE-WRENCHED.BOLT BROKE LOOSE ALL AT ONCE AND EMPL STRUCK RIGHT THUMB AGAINST BELLY PAN CAUSING CUT TO THUMB.

THE EMPLOYEE IS UNSURE HOW OR WHEN ACCIDENT OCCURRED. THE PARTICLE REMOVED FROM HIS RIGHT EYE WAS DIRT OR A SMALL ROCK. MOST LIKELY WIND BLEW DIRT IN HIS EYES.

THE EMPLOYEE WAS STANDING IN THE BED OF A 50 TON EUCLID HAUL TRUCK UNPLUGGING A BIN, WHEN HE SLIPPED ON SOME MUD. HE DID NOT FALL UT TWISTED HIS BACK WHEN HE SLIPPED.

EMPLOYEE ATTEMPTED TO KICK A MECHANICS CREEPER OUT OF THE WAY OF A CLOSING AUTOMATIC SHOP DOOR AND MISSED. HIS FOOT STRUCK THE DOOR, BRUISING HIS LEFT FOOT.

I NAME WAS WORKING ON REMOVAL OF CUTTING EDGE WHEN IT FELL ON LEFT FOOT

I NAME GOT PIECE OF SMALL STEEL IN EYE

HE ALLEGES HE STRAINED LOWER BACK WHILE PICKING UP 20 LB. PROPANE TANK.

EE WAS PLOWING SNOW WHEN HE PUT HIS HEAD OUT OF WINDOW AND PULLED OR STRAINED MUSCLES IN NECK.

I NAME WAS REPIARING A SCREEN WITH A GRINDER AND A PIECE OF METAL WENT INTO THIS EYE I NAME DID NOT HAVE PROPER EYE PROTECTION ON AND WAS GIVEN A WARNING LETTER FOR THE INCIDENT

I NAME WAS WALKING BY SOMEONE USING A GRINDER & A SMALL PIECE OF STEEL BECAME EMBEDDED IN HIS EYE

HE WAS TRYING TO FIT IN LOCKING PIN THROUGH BOLT ON BLADES UNDER MOWER.

HE WAS OPERATING A DOZER AND WAS WALKING TO HIS TRUCK WHEN HE SLIPPED OFF A LARGE ROACK AND FELL ON HIS BACK AND HIP. HE SLIGHTLY CRACKED A VERTEBRA IN HIS MIDDLE BACK.

I NAME WAS WELDING ON CAT 988B LOADER BUCKET USING WELDING HEMLMET I NAME RECEIVED WELDING FLAHS OF THE EYES

EMPL WAS INSTALLING CHUTE LINER UNDER #1 CRUSHER. CHUTE FELL ON EMPL'S RIGHT RING FINGER. EMPL HAD SLIGHT FRACTURE.

HE WAS CLOSING THE WATER VALVE AND THE VALVE BROKE CUTTING HIS RIGHT ARM.

I NAME WAS HELPING CLEAN OUT A BIN WITH A SHOVEL AND HAD A CEREBRAL HEMORRHAGE.

HE KNELT ON RIG2T KNEE WHILE WORKING ON STEEL BEAM. HE STOOD UP AND KNEE WAS SORE.

THE INJURED WAS3CUTTING ANGLE IRON BRACING UNDER #4 SCREEN AND ONE PIECE FELL FROM STRUCTURE AND CUT HIS RIGHT FOREARM.

I.NAME WAS DOIN1 CLEANUP WORK UNDER CONVEYOR & RAISED UP HITTING HIS BACK ON ANGLE IRON STRAINING HIS BACK & STRAINING HIS BACK & BRUISING IT POSSIBLE HAIRLINE FX OF VERTEBRAE

I.NAME WAS UNPLUGGING CHUTE COMING FROM THE 20 IN AUGER HE REMOVED THE CHUTE COVER AND TRIED TO UNPLUG IT WITH A PIECE OF STEEL HE ACCIDENTALLY BROUGHT HIS RT HAND UP TOO HIGH AND HIT THE AUG ER THE COMPANY POLICY IS TO LOCKOUT EQUIPMENT IT WILL BE CLOSELY MONITORED FROM NOW ON