Employee was stepping down from cab of dozer onto the track when employee felt pain in right knee
Bevins Branch Surface: 489 citaciones de la MSHA Coal
Bevins Branch Surface tiene $254K en multas propuestas de MSHA y $12K pendientes en 18 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Bevins Branch Surface.
- Muertes
- 0
- Incidentes totales
- 31
- Años en registro
- 1998–2020
- Último incidente
- Apr 2020
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Bevins Branch Surface tiene $254K en multas propuestas de MSHA y $12K pendientes en 18 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 85 · 83%
- Quedaron como emitidas 17 · 17%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| KENT 2013-527 | Settlement | Gill | 2014 | $23K → $1K |
| KENT 2013-497 | Settlement | Gill | 2014 | $19K → $2K |
| KENT 2013-700 | Settlement | Gill | 2014 | $16K → $2K |
| KENT 2014-149 | Settlement | Gill | 2014 | $12K → $9K |
| KENT 2014-0655 | Settlement | Gill | 2015 | $12K → $9K |
| KENT 2012-1024 | Settlement | Lesnick | 2013 | $9K → $7K |
El muestreo de MSHA en Bevins Branch Surface muestra que 100% de 390 muestras de polvo respirable de carbón cumplieron el estandar de 1.5 mg/m3.
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Polvo respirable de carbón
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
Última medición: 2021-05-13, hace 5 años
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
El valor de concentración excesiva (ECV) es el umbral de aplicación por muestra de la propia MSHA, que incorpora la incertidumbre de medición; una muestra por encima de su ECV puede motivar una citación. El conteo cubre solo las muestras a las que MSHA asignó un ECV.- BULLDOZER OPERATOR107
- HIGHWALL DRILL OPERATOR93
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE86
Sílice (cuarzo)
Última medición: 2021-05-20, hace 5 años- HIGHWALL DRILL OPERATOR9
- BULLDOZER OPERATOR7
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE5
Ruido
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.
Última medición: 2019-11-19, hace 6 años
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.- BULLDOZER OPERATOR25
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE23
- HIGHLIFT OPERATOR/FRONT END LOADER21
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.| Año | dentro de 1.5 mg/m3 | muestras |
|---|---|---|
| 2021 | 100% | 3 |
| 2020 | 100% | 6 |
| 2019 | 100% | 31 |
| 2018 | 100% | 47 |
| 2017 | 100% | 51 |
| 2016 | 100% | 38 |
| 2015 | 100% | 45 |
| 2014 | 100% | 25 |
| 2013 | 100% | 14 |
| 2012 | 100% | 23 |
| 2011 | 100% | 18 |
| 2010 | 100% | 14 |
| 2009 | 100% | 14 |
| 2008 | 100% | 9 |
| 2007 | 100% | 27 |
| 2006 | 100% | 6 |
| 2005 | 100% | 12 |
| 2004 | 100% | 7 |
| Año | sílice prom. (%) | muestras |
|---|---|---|
| 2021 | 5.9 | 2 |
| 2019 | 11.3 | 5 |
| 2018 | 10.1 | 3 |
| 2017 | 15.6 | 2 |
| 2016 | 11.2 | 1 |
| 2015 | 5.0 | 5 |
| 2014 | 8.4 | 3 |
| Año | sobre el LPE | muestras |
|---|---|---|
| 2019 | 0% | 11 |
| 2018 | 0% | 5 |
| 2017 | 0% | 9 |
| 2015 | 0% | 6 |
| 2014 | 0% | 7 |
| 2013 | 14% | 7 |
| 2012 | 0% | 11 |
| 2011 | 0% | 6 |
| 2010 | 14% | 7 |
| 2009 | 0% | 5 |
| 2007 | 0% | 16 |
| 2005 | 0% | 12 |
Bevins Branch Surface registró 6.65 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2020.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2020 * | 6.65 | 6.65 | 0.000 |
| 2019 * | 2.23 | 0.00 | 0.000 |
| 2018 | 3.43 | 3.43 | 0.000 |
| 2017 | 1.79 | 1.79 | 0.000 |
| 2016 | 1.95 | 1.95 | 0.000 |
| 2015 | 0.00 | 0.00 | 0.000 |
| 2014 | 1.26 | 1.26 | 0.000 |
| 2013 | 1.21 | 1.21 | 0.000 |
- Coal Mac Inc 1998 a 2004
- Apex Energy Inc 2004 a 2019
- Virgie Clean Mining, LLC 2019 a 2023
- Myra Resources LLC. 2023 a 2025
- Reckoning Reclamation, LLC. 2025 al presente
ⓘ
La producción de carbón se reporta trimestralmente y va con retraso respecto al periodo actual; los trimestres más recientes pueden estar incompletos.| Año | Empleados | Carbón producido (toneladas) |
|---|---|---|
| 2023 | 13 | |
| 2021 | 5 | |
| 2020 | 15 | 8,998 |
| 2019 | 35 | 99,205 |
| 2018 | 41 | 182,138 |
| 2017 | 39 | 325,531 |
| 2016 | 45 | 358,768 |
| 2015 | 66 | 409,621 |
| 2014 | 61 | 439,960 |
| 2013 | 58 | 445,611 |
| 2012 | 65 | 411,646 |
| 2011 | 70 | 470,720 |
| 2010 | 61 | 369,071 |
| 2009 | 62 | 418,037 |
| 2008 | 58 | 527,483 |
| 2007 | 58 | 494,058 |
| 2006 | 59 | 560,992 |
| 2005 | 44 | 304,930 |
| 2004 | 23 | 36,486 |
| 2000 | 9 |
Bevins Branch Surface se ubica en Pike County, Kentucky, donde la categoría minera del Censo representa el 5.1% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2023 Q2 | 4,000 | 0 | 0 | 0.0 |
| 2023 Q1 | 800 | 2 | 0 | 2500.0 |
| 2021 Q2 | 1,372 | 4 | 0 | 2915.5 |
| 2021 Q1 | 2,902 | 9 | 1 | 3101.3 |
| 2020 Q4 | 3,017 | 0 | 0 | 0.0 |
| 2020 Q3 | 7,162 | 0 | 0 | 0.0 |
| 2020 Q2 | 9,081 | 0 | 0 | 0.0 |
| 2020 Q1 | 10,807 | 1 | 0 | 92.5 |
Mostrar 63 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2019 Q4 | 6,929 | 6 | 1 | 865.9 |
| 2019 Q3 | 29,967 | 1 | 1 | 33.4 |
| 2019 Q2 | 27,191 | 10 | 1 | 367.8 |
| 2019 Q1 | 25,739 | 0 | 0 | 0.0 |
| 2018 Q4 | 33,561 | 3 | 0 | 89.4 |
| 2018 Q3 | 22,563 | 0 | 0 | 0.0 |
| 2018 Q2 | 30,231 | 6 | 1 | 198.5 |
| 2018 Q1 | 30,377 | 1 | 0 | 32.9 |
| 2017 Q4 | 31,572 | 5 | 1 | 158.4 |
| 2017 Q3 | 29,543 | 20 | 5 | 677.0 |
| 2017 Q2 | 24,383 | 9 | 6 | 369.1 |
| 2017 Q1 | 26,379 | 8 | 1 | 303.3 |
| 2016 Q4 | 28,026 | 8 | 0 | 285.4 |
| 2016 Q3 | 29,303 | 6 | 3 | 204.8 |
| 2016 Q2 | 22,464 | 11 | 3 | 489.7 |
| 2016 Q1 | 22,953 | 0 | 0 | 0.0 |
| 2015 Q4 | 25,732 | 3 | 0 | 116.6 |
| 2015 Q3 | 29,321 | 0 | 0 | 0.0 |
| 2015 Q2 | 37,081 | 5 | 0 | 134.8 |
| 2015 Q1 | 34,264 | 3 | 0 | 87.6 |
| 2014 Q4 | 41,463 | 0 | 0 | 0.0 |
| 2014 Q3 | 37,761 | 0 | 0 | 0.0 |
| 2014 Q2 | 43,255 | 19 | 12 | 439.3 |
| 2014 Q1 | 36,594 | 0 | 0 | 0.0 |
| 2013 Q4 | 46,013 | 18 | 8 | 391.2 |
| 2013 Q3 | 36,889 | 0 | 0 | 0.0 |
| 2013 Q2 | 40,071 | 11 | 6 | 274.5 |
| 2013 Q1 | 42,272 | 0 | 0 | 0.0 |
| 2012 Q4 | 39,611 | 30 | 21 | 757.4 |
| 2012 Q3 | 34,369 | 17 | 7 | 494.6 |
| 2012 Q2 | 43,899 | 4 | 0 | 91.1 |
| 2012 Q1 | 43,437 | 17 | 4 | 391.4 |
| 2011 Q4 | 54,330 | 0 | 0 | 0.0 |
| 2011 Q3 | 50,555 | 5 | 2 | 98.9 |
| 2011 Q2 | 41,549 | 15 | 3 | 361.0 |
| 2011 Q1 | 37,228 | 11 | 3 | 295.5 |
| 2010 Q4 | 44,471 | 1 | 0 | 22.5 |
| 2010 Q3 | 44,874 | 11 | 4 | 245.1 |
| 2010 Q2 | 34,682 | 0 | 0 | 0.0 |
| 2010 Q1 | 38,624 | 15 | 5 | 388.4 |
| 2009 Q4 | 36,297 | 1 | 0 | 27.6 |
| 2009 Q3 | 40,941 | 17 | 6 | 415.2 |
| 2009 Q2 | 34,435 | 0 | 0 | 0.0 |
| 2009 Q1 | 41,599 | 12 | 7 | 288.5 |
| 2008 Q4 | 35,220 | 0 | 0 | 0.0 |
| 2008 Q3 | 40,178 | 0 | 0 | 0.0 |
| 2008 Q2 | 32,229 | 9 | 4 | 279.3 |
| 2008 Q1 | 38,883 | 3 | 1 | 77.2 |
| 2007 Q4 | 35,384 | 3 | 1 | 84.8 |
| 2007 Q3 | 39,167 | 7 | 2 | 178.7 |
| 2007 Q2 | 34,696 | 0 | 0 | 0.0 |
| 2007 Q1 | 42,323 | 6 | 2 | 141.8 |
| 2006 Q4 | 41,225 | 0 | 0 | 0.0 |
| 2006 Q3 | 45,225 | 1 | 1 | 22.1 |
| 2006 Q2 | 33,966 | 7 | 1 | 206.1 |
| 2006 Q1 | 36,088 | 0 | 0 | 0.0 |
| 2005 Q4 | 30,588 | 11 | 8 | 359.6 |
| 2005 Q3 | 32,520 | 5 | 2 | 153.8 |
| 2005 Q2 | 23,631 | 9 | 6 | 380.9 |
| 2005 Q1 | 22,955 | 1 | 1 | 43.6 |
| 2004 Q4 | 15,696 | 5 | 3 | 318.6 |
| 2000 Q2 | 4,862 | 0 | 0 | 0.0 |
| 2000 Q1 | 0 | 0 | 0 |
Incidentes reportables
31 en archivo2020 · 1 incidente
2019 · 1 incidente
Employee was putting boom back in cradle when hook came loose striking EE and creating small laceration in right side of head
2018 · 2 incidentes
Employee was putting antifreeze in rock truck. When getting down, feet got caught. To keep from falling, employee grabbed railing and pulled right shoulder.
Employee was backing up dozer, slipped off rock jolted the employee
2017 · 1 incidente
EE was getting loaded with shot material in pot area when getting loaded the shot material fell into off side of truck shaking operator around in the cab of truck.
2016 · 2 incidentes
The excavator operator told everyone ee was getting off excavator to take a restroom break. EE didn't listen and back into excavator boom with rock truck.
Employee tripped over steel cable in the office parking lot injuring EE's right back and hip.
2014 · 1 incidente
Employee was mounting Front End Loader when he felt pain in his right hip and knee. Employee didn't report this accident until 9/8/2014 and started losing time on this date..
2013 · 1 incidente
Employee was working on grader blade trying to put it back on. Blade kicked out from jack and hit his foot.
2012 · 3 incidentes
EMPLOYEE STATES: PRESSED TILT PIN IN LOADER, WAS REMOVING PULLER GROUP, GROUP WAS HANGING ON BOOM, STARTED NUT ON ROD TO KEEP ALL PLATES AND RAM FROM FALLING OFF. ROD SHIFTED CAUSING PLATES AND RAM TO SHIFT AND CAUGHT THUMB BETWEEN TOOLING, BOOM WAS STILL WAS NOT MOVED.
Employee was getting in SUV to return to work area when the driver pulled away to quickly causing employee to loose footing causing pain in right knee. Employee started losing time on 10-23-12.
Employee was riding in SUV Man Bus when it hit a dip in road causing pain in back. Employee started losing time on 7/9/12
2011 · 1 incidente
Employee was loading wethole product when he tripped on a box and landed on his knee.
2010 · 5 incidentes
Employee was dismounting Caterpillar 785 haul truck & missed step on ladder. Employee grabbed handrail with right hand causing pain in right shoulder & down right side & back.
Employee stated he drove rock truck down hill and through a dip and felt pain & numbness in left arm.
EE was working on Bull Dozer's air conditioner. EE was cutting wire tie when his knife slipped and cut his thumb on his left hand.
EE stated he was carrying wet hole bags and felt pain in his lower back. (no lost time) injury only.
Walking to water pump. The area was muddy, EE slipped and twisted right knee.
2009 · 3 incidentes
Employee stated he was operating rock truck. He stated the rock truck bounced & his neck & left arm started tingling.
A blasting accident occurred when the 2500 Hitachi shovel contacted an undented primer in an area that had been shot. This accident resulted in no injury to anyone.
Had been climbing up and down the boom all day, installing a cylinder, he had bumped his left elbow several times over the course of the day. His left hand began hurting all the way to the elbow when he gripped an object.
2008 · 2 incidentes
Employee was climbing onto D10N dozer. His foot slipped on the track causing him to fall-back striking pusharm of dozer. He complained of tenderness and swelling in lower back area.
Driver pulled out of pit, started to tarp his load when tarp became stuck. Driver got out of truck, walked around passenger side & tried to push tarp back and his right wrist popped. After his wrist popped he walked around to driver side and climbed up side of truck bed to see if tarp was caught on something.
2007 · 3 incidentes
Working on dozer roller frame, the bottom part fell down hitting employee's wrist.
EE said that fe fell from step ladder.
Employee was hauling over-burden to the dump in a 777C Cat rock truck, Equip. #301. When he started downhill to the dump area he noticed he had no brakes & went thru berm & over about 25' high dump. He went cab first into spoil bank. It threw him face first into windshield. He was not wearing seat belt.
2005 · 3 incidentes
EMPLOYEE SAID THAT LOADER OPERATOR DROPPED ROCK TOO HARD IN TRUCK BED.
EE and other ee was removing a steering demand valve 250-300. and carring valve to bumper of tool truck when he felt sharp pain in his shoulder blade area
EMPLOYEE BACKED THE ROCK TRUCK OVER BERM, THE TRUCK CAME TO REST NEXT LEVEL IN HOLLOW FILL.
1999 · 1 incidente
ATTEMPTED SUICIDE - POURED KEROSENE ON HIMSELF AND SET ABLAZE. BURNS TO 60% OF BODY. LOWER EXTREMITIES SEVERELY BURNED.
1998 · 1 incidente
EE WAS PREPARING TO USE THE BOOM ON HIS SERVICE TRUCK. HE HAS MANUAL OUTRIGGERS. HE WAS TRYING TO MOVE THE OUTRIGGER FOR BETTER STABILIZATION. THE OUTRIGGER WAS STUCK. HE PULLED HARDER. WHEN THE OUTRIGGER CAME OUT, IT HIS HIS RIGHT FOOYT \