BLUE MOUNTAIN MINERALS Metal/Non-Metal

Performing Conveyor Maintenance led to dust of work falling into the face of the miner. Some got behind the eye protection and was unfortunately rubbed in, causing imbedding of foreign material in the left eye.

Replacing a return roller. Return roller, with a hole full of material was pulled from a sitting position by the miner. Twisting hard to move heavy object caused persistent soreness in lower left side/back. Miner did not report condition and medical visits until next scheduled shift after receiving a restricted work status 6/21/2025.

Miner was moving a piece of steel with a come along when the come along unexpectedly released and the miner struck their hand on the steel fracturing a finger.

Miner stepped off of a pallet backwards and into a forklift that was parked close to the pallet, striking right knee on the forklift and causing a contusion.

Miner was removing an internal piece of a rotary crusher. Miner was swinging a sledge hammer to loosen the part, missed the target and slammed right index finger on the crusher rotor.

Miner impacted their shoulder on a conveyor frame roof structure while cleaning material from the belt.

Miner dropped a piece of steel on finger.

Miner was clearing a downed tree and came in contact with poison oak. The following day EE developed a poison oak rash.

Miner was working in an area with close quarters, as miner finished the work, miner backed out of the space the miner was occupying and struck lower back on a support structure that the miner did not see, causing a minor contusion to the lower back. Miner finished shift without incident or complaint but called in the following day.

Miner is experiencing pain in both hand joints and wrist.

Miner was using a scraping tool to remove a gasket from a piece of equipment and ran the tool across their own hand incurring a laceration.

Miner was running a rock breaker and got jarred around when EE broke a chunk off of a big boulder and the machine rocked. Back strain.

Miner was walking down a set of stairs and slipped on the third step from the bottom of the stairway, falling to the bottom and straining EE's back.

EMPLOYEE WAS REMOVING A COUNTERWEIGHT FROM THE CAT216B SKID STEER. AFTER REMOVING THE 2ND OF 2 BOLTS HOLDING THE WEIGHT IN PLACE, THE WEIGHT SLIPPED OUT OF EE'S RIGHT HAND AND EE TRIED TO CATCH IT. EE WAS UNABLE TO STOP THE WEIGHT'S MOTION. PART OF EE'S RIGHT HAND WAS CRUSHED UNDER THE WEIGHT. EE SUSTAINED AN OPEN FRACTURE AND LACERATION OF THE END OF EE'S RIGHT RING FINGER.

Miner was connecting a dewatering pump when a rock rolled off of a berm and struck miner in the left leg.

EMPLOYEE WAS UNBOLTING A METAL GRATE UNDER CV04 CONVEYOR BELT. THE NUT BROKE OFF, THE GRATE SWUNG DOWN AND SMASHED EMPLOYEE'S HAND BETWEEN THE LADDER AND THE GRATE, WHICH WAS FULL OF ROCKS.

EMPLOYEE WAS DESCENDING THE STEPS FROM THE CEMCO (CR05) WHEN EE MIS-STEPPED AND AGGRAVATED AN OLD LEFT SHOULDER INJURY IN THE PROCESS OF CATCHING SELF.

Employee was sitting in a haul truck while being loaded with rock. The employee reported that the placing of the rock into the haul truck bed aggravated a pre-existing condition.

EMPLOYEE WAS KNEELING WHILE WELDING AT THE HEAD PULLEY OF A CONVEYOR BELT, CV-03. SOME SLAG FELL ON EE'S RIGHT KNEE, BURNING IT. EE DID NOT SEEK MEDICAL TREATMENT UNTIL INFECTION, 11/27, DIAGNOSIS BY PHYSICIAN OF CELLULITIS.

EMPLOYEE STEPPED ON A LIFTER INSIDE OF THE SUPER SCRUBBER AND EE'S RIGHT FOOT SLIPPED OFF THE SIDE OF THE LIFTER. EE HEARD SOMETHING SNAP IN EE'S RIGHT ANKLE.

EMPLOYEE WAS REMOVING A GUARD ON A CONVEYOR BELT FOR THE PURPOSES OF CLEANUP. BUILT-UP MATERIAL ON TOP OF THE GUARD CAUSED THE GUARD TO SLIP WHEN IT CAME LOOSE, THE EDGE CUTTING EE'S FINGER.

EMPLOYEE'S ANNUAL HEARING TEST INDICATES MILD (LEVEL 2) HEARING LOSS IN BOTH EARS

WHILE TRYING TO CLEAN RIGHT SIDE MIRROR OF HAUL TRUCK #3, EMPLOYEE SLIPPED AND FELL ABOUT 57 IN. TO THE GROUND. THE RIGHT SIDE STEP HAD BEEN REMOVED FOR REPAIR AND INSTEAD OF USING A LADDER TO GET TO THE MIRROR, EMPLOYEE TRIED TO WALK ACROSS THE HAUL TRUCK'S FRONT BUMPER AND A SET OF CHOCK BLOCKS. EE STEPPED ON A CHOCK BLOCK, WHICH MOVED, AND EE FELL.

EMPLOYEE WAS WALKING ON A LOADER CATWALK. EE DUCKED TO GO UNDER A SIDE MIRROR AND STRUCK HEAD ON THE MIRROR BRACKET. A BOLT ON THE BRACKET HIT JUST UNDER THE HARD HAT BRIM. EE'S HEAD SPLIT OPEN FROM THE BLOW, STARTING AT THE FOREHEAD AND ENDING AT THE MIDDLE OF THE TOP OF EE'S HEAD.

EMPLOYEE WAS WALKING DOWN SOME STAIRS ON THE CATWALK THAT CROSSES UNDER SS01 DISCHARGE AND SLIPPED, TWISTING HIS RIGHT KNEE AND HIP. HE WAS DIAGNOSED WITH LUMBAR SPRAIN AND RIGHT KNEE SPRAIN.

EMPLOYEE WAS ACTING AS AN INJURED PERSON ON A FLEXIBLE STRETCHER DURING A CONFINED SPACE TRAINING. THE STRETCHER BENT HIS HEAD FORWARD TO HIS CHEST DURING THE EXTRACTION FROM THE CONFINED SPACE. NECK DISCOMFORT MANIFESTED ON SUNDAY, 1/20.

EMPLOYEE WAS PULLING CABLE THROUGH A RACEWAY FROM LEFT TO RIGHT. HE FELT A SUDDEN PAIN IN HIS LOWER LEFT LUMBAR REGION. DIAGNOSED AS A LUMBAR STRAIN.

EMPLOYEE ACCIDENTALLY HIT A BEE NEST WITH A PRY BAR HE WAS USING IN THE PLANT. THE BEES FLEW UP HIS SHIRT AND STUNG HIM ON HIS UPPER RIGHT UNDERARM. HE CONTINUED WORKING THAT DAY AND THE NEXT BUT SOUGHT TREATMENT FOR SWELLING AND INFECTION ON DAY 3, 6/29.

Reported to employer on February 7, 2012: Approximately 2-3 weeks ago, employee remembers replacing a seat in a loader (LD16). While he was putting the seat in place, the seat jammed against the door and stopped him. Employee thinks this is when he was injured.

Employee was lowering jack stand tube into base and finger was pinched.

EMPLOYEE WAS SETTING A STRUCTURE PAD, BENT OVER AND STRAINED HIS LOWER BACK. EMPLOYEE CAME TO WORK THE DAY AFTER THE INJURY, OCT. 18TH, AND WORKED FOR TWO HOURS, THEN LEFT BECAUSE OF PAIN FROM THE INJURY. HE CAME BACK AGAIN TO WORK ON OCT. 19TH AT FULL CAPACITY.

EMPLOYEE DROPPED AN ITEM UNDER A WELDING TABLE. WHILE STRAIGHTENING UP AFTER BENDING OVER TO PICK UP THE ITEM, HE HIT HIS HEAD ON THE UNDERSIDE OF THE TABLE, CUTTING HIS SCALP.

EMPLOYEE WAS WALKING TO THE SAMPLE SHED AND TRIPPED OVER A PIECE OF BURIED ANGLE IRON.

EMPLOYEE DID NOT REPORT THE INJURY UNTIL 8/27/10. WHILE INSTALLING LIFTERS IN SS01, EMPLOYEE WAS LINING UP BOLTS WITH HOLES WHILE PUTTING LIFTER INTO POSITION. BALANCING THE LIFTERS WHILE LINING THEM UP WAS CHALLENGING, THEY WEIGH ABOUT 80 POUNDS EACH. IT MADE HIS LOWER RIGHT BACK SORE.

Employee was carrying a 5-gallon bucket with tools in it and stepped off a 14" beam with his right foot and his knee twisted and popped. Employee declined to see a doctor at the time. On June 8th, employee asked to be take to emergency room due to knee pain, has not been back to work since.

EMPLOYEE WAS USING A UTILITY KNIFE TO CUT THROUGH INSULATION ON A CABLE. THE KNIFE SLIPPED AND CUT HIS RIGHT INDEX FINGER.

EMPLOYEE WAS REMOVING GRATES FROM A CRUSHER WITH A HAMMER AND PUNCH, AND THE HAMMER SLIPPED OFF THE HEAD OF THE PUNCH AND STRUCK HIS LEFT THUMB KNUCKLE.

EE WAS HOLDING A PRY BAR IN MASTER LINK WHILE CO-WORKER WAS TAKING THE SLACK OUT TO MATCH UP THE OTHER END OF THE LINK. THE TRACK WENT TOO FAR AND CAME DOWN ON END OF THE PRY BAR THAT HE WAS HOLDING ON HIS SHOULDER AND KNOCKED HIM TO THE GROUND.

EMPLOYEE WAS WALKING FROM WAREHOUSE TO FORKLIFT, SLIPPED ON SPILLED FLOCCULENT, FELL BACKWARDS AND HIT HEAD ON CONCRETE, LACERATION TO SCALP

Torn rotator cuff right arm due to cumulative injury from long-term use of a hydraulic press

Employee was cutting a head off a bolt with a torch. The head of the bolt rolled down conveyor belt and came into contact with his left knee. Employee failed to report the injury until a week later when infection had set in and he was forced to go to the emergency room for care. We found out about the injury on 11/10.

EMPLOYEE WAS REMOVING SOME OLD RUBBER LINER FROM A CLASSIFIER, AND SOME DRY RUBBER FLAKES BROKE OFF AND WENT IN HIS RIGHT EYE.

MISSED STEP COMING DOWN LADDER, LEFT FOOT CAUGHT BETWEEN RUNGS, TWISTED ANKLE

EMPLOYEE WAS GRINDING WITH SMALL GRINDER, AND SOME DIRT FROM THE GRINDING HOOD FELL INTO HIS EYE, SCRATCHING HIS EYE

EMPLOYEE WAS REPLACING SHOES IN THE HAZEMAG CRUSHER AND HE SMASHED HIS LEFT RING FINGER BETWEEN TWO OF THE SHOES

EE WAS TIGHTENING A PIECE OF PIPE IN THE LATHE. AS HE TIGHTEND THE CHUCK, HE HIT THE FORWARD LEVER ON THE LATHE WITH HIS LEFT KNEE, ENGAGING THE LATHE, AND HIS CLOTHING WAS CAUGHT IN THE CHUCK WRENCH. HIS LEFT ARM WAS PULLED PARTIALLY AROUND THE LATHE, CAUSING ABRASION AND BRUISING OF HIS LEFT HAND, WRIST, ARM AND CHEST.

EE was welding and he finished, lifted his hood, and a piece of slag spawled off and lodged in his right eye.

Employee was installing a 1/2" steel plate to mount a rotary feeder. He used excessive force to pull the plate into position, and partially tore his right bicep tendon.

TRYING TO LIFT A SHIFT THAT WAS TOO HEAVY FOR HIM AND PULLED A MUSCLE IN HIS BACK.

EE (CRUSHER LOADER OPERATOR) WAS PICKING UP A METAL FLANGE THAT WAS IN THE STOCKPILE. EE THREW FLANGE ON COUNTERWEIGHT OF LOADER AND CAUGHT HIS RIGHT MIDDLE FINGER BETWEEN THE FLANGE AND THE HANDLE ON THE BACK OF THE LOADER.

MISSED FOOTING WHILE GETTING ON A CAT 966 FRONT END LOADER. TWISTED AND JUMPED DOWN TO THE GROUND.

PICKING UP SCRAP CAT 773 WHEEL RINGS. TWO RINGS SLID TOGETHER AND PINCHED RIGHT INDEX FINGER.

THE LOADER OPERATOR AT THE PRIMARY CRUSHER DEVELOPED CARPAL TUNNEL SYNDROME (BILATERAL) OVER TIME. THIS CONDITION WILL REQUIRE SURGERY. AT THIS POINT, THE DAYS OF RESTRICTED DUTY OR LOST DAYS IS UNKNOWN.

CHECKING FOR A CRACK IN A LOADER DIFFERENTIAL MECHANIC WAS USING BRAKE CLEANER IN AN AERSOL CAN TO CLEAN AREA TO BE INSPECTED. ACCIDENTALLY SPRAYED BRAKE CLEANER ON HIS FACE AND LEFT EYE. WASH ED OUT EYE IN EYE WASH STATION AND WAS TAKEN TO DOCTOR TO CHECK EYE. WAS WEARING SAFETY GLASSES.

DROPPED A PIECE OF STEEL FROM WORK BENCH ON TOP OF LEFT FOOT RESULTING IN BRUISING THE LEFT FOOT.

PANEL THAT MECHANIC WAS REMOVING WAS OVER THE WIPER MOTOR ON A CAT 992 LOADEER. IT WAS STUCK. PULLED HARDER AND WHEN IT CAME LOOSE HE REACH BACK TO CATCH HIMSELF AND PULLED MUSCLE IN RIGHT SHO ULDER.

CUTTING A PIECE OF RUBBER HOSE WITH A UTILITY KNIFE. THE KNIFE SLIPPED, CUTTING THE LEFT LITTLE FINGER.

CUTTING HOLES IN PLASTIC SKIRTING.

WORKING WAREHOUSE YARD, POSITIONING PALLETS AND A PALLET FELL ON TOP OF LT. FOOT. NOTE* THIS REPORT IS LATE BECAUSE WE WERE THINKING THAT THIS WAS NOT A REPORTABLE ACCIDENT. THE DR. PRESCRIBED RESTRICTED DUTY, BUT EE SAIN HIS FOOT WAS FINE & RETURNED TO HIS NORMAL DUTIES.

UNIVERSAL IMPACT SOCKET BROKE AND CUT THUMB AND INDEX FINGER ON LEFT HAND. SOCKET WAS BAD.

EE WAS CLEANING UP STEEL LEFT ON SHOPSAW. HE MOVED A PIECE OF CHANNEL THAT WAS SUPPORTING A 3" X4' PIECE OF COLD ROLL, & THE ROLL FELL ABOUT 30" & HIT HIS LEFT FOOT ON THE METATARSAL AREA, BRE AKING A BONE IN HIS FOOT.

DRIVING PIN OUT OF THE HAMMER ON THE ROCK BREAKER, HOLDING THE DRIFT PUNCH IN RIGHT HAND, THE PIN CAME LOOSE AND HIT RIGHT INDEX FINGER WITH HAMMER AGAINST THE SIDE OF THE PIN HOLE.

EMPLOYEE WAS DUMPING A SCRAP METAL INTO A SCRAP METAL TRAILER. THE TRIP HANDLE ON THE BIN SLAMMED BACK WHEN RELEASED AND HIT THE EMPLOYEE'S LITTLE FINGER ON THE RIGHT HAND.

RIGGING SLIPPED WHILE LIFTING A SECTION OF CRUSHER LINER WITH A CRANE. THE LINER DROPPED APPROX. 1 FT. HITTING THE WORKER'S FOOT. THE 4TH TOE ONRIGHT WAS BROKEN. THE ACCIDENT WAS CAUSED BY IMP ROPER RIGGING.

THE MAINTENANCE WORKER WAS POSITIONING A SHEET OF METAL. THE METAL GOT HUNG UP AND WHEN HE LIFTED UP ON IT, IT CAMNE LOOSE AND FELL, CATCHING HIS FINGER BETWEEN THE METAL AND AN I BEAM. THE TI P OF THE LEFT RING FINGER WAS BROKEN AND SMASHED. STITCHES WERE REQUIRED.

ATTEMPTING TO CLEAR CHUTE WITHOUT SHUTTING DOWN OR LOCKING OUT THE CONVEYOR BELT. GUARD WAS NOT A BOLT DOWN TYPE, BUT RESTED IN GROOVES. A BELT WIPER WAS ATTACHED TO THE GUARD. THE WIPER ON TH E UNDERSIDE OF THE TOP BELT WAS PULLED INTO THE HEAD PULLEY & SLAMMED THE GUARD INTO THE WORKER,PINNING HIM BETWEEN THE GUARD & THE HAND RAIL. INTERNAL INJURIES; ESTIMATED 5-6 WEEKS LOST TIME

WHILE OPERATING BOBCAT EE JARRED HIS BACK BY RUNNING OVER SEVERAL BUMPS IN A ROW

EMPLOYEE WAS USING A 3/4" IMPACT WRENCH TO PUT TBOLTS BACK INTO A SKID PLATE UNDER LOADER 15, WHEN HE STRAINED HIS RIGHT SHOULDER.

EMPLOYEE WAS WELDING ON A HAMMER PART MADE OF STEEL PLATE. THE PLATE SLIPPED OFF THE TABLE AND HIT HIS RIGHT FOOT.

POUNDING ON A PLUGGED CHUTE WITH A HAMMER & OVEREXTENDED HIS RIGHT ARM

EE WAS LIFTING KABOTA BLOCK FRROM TRUCK BED TO WORK BENCH AND SUSTAINED HERNIA TO LOWER ABDOMEN. THIS REPORT WAS INITIATED UPON RECEIPT OF INFO RE: LOST TIME DUE TO HERNIA SURGERY 7/5/00.

WORK COMP DOCTOR DIAGNOSIS, FROM AGGRAVATION OF ASTHMA CONDITION. FINAL NOTICE OF DETERMINATION WAS RECEIVED BY THIS OFFICE ON 6-5-00.

CLIMBING SLIPPED & HIT LOWER BACK ON A BEAM

EE WAS WALKING TO TOP OF MIXING BINS, SLIPPED ON ROCKS ON CATWALK AND FELL ON HIS BAKC, INJURING HIS BACK. * THIS FORM WAS COMPLETED LATE DUE TO EMPLOYEE NOT REPORTING LOST TIME UNTIL 2/4/00.

EE WAS MOVING OLD EQUIPMENT. CHOKER AND SHACKLE SLIPPED AND SMASHED HIS LEFT HAND.

EE WAS CUTTING ROUND STOCK HELD IN VISE WITH A HACKSAW, IT CUT THRU QUICKER THAN HE THOUGHT & HIS HAND JAMMED INTO A CORNER OF THE VISE

EMPLOYEE WAS LOADING SCREENS IN THE BACK OF A PICKUP. SCREENS FELL ON HAND, CUTTING FINGER.

EMPLOYEE LIFTED HIS HOOD AFTER WELDING A GUARD AND A POP OF SLAG GOT IN HIS EYE. HE INITIALLY THOUGHT IT WAS DUST, BUT FOUND OUT THE FOLLOWING MORNING IT WAS SLAG.

EE WAS WAKING TO EMPTY THE RAIN GAUGE NEXT TO THE OFFICE AND TRIPPED OVER SOME CHICKEN WIRE, LANDING ON HER LEFT HAND.

EE S EYE WAS IRRITATED. HE THOUGHT HE'D HAD A WELD FLASH, BUT A DR'S EXAM ON 1-11-99 PROVED IT WAS A PIECE OF METAL IMBEDDED IN HIS LEFT EYE.

EE WAS UNCLOGGING AN AUGER WITH A SLEDGEHAMMER. WHILE SWINGING THE HAMMER, HE STRAINED HIS RIGHT SIDE MIDDLE BACK.

EE WAS LIFTING & PULLING A LARGE METAL TOOLBOX OUT OF A CRAMPED SPACE IN THE MAINT SHOP SO THE FORKLIFT COULD GET UNDER IT. HE WAS ASSISTED BY THE EE NAMED IN #11.

EMPLOYEE WAS SETTING A CHAIN ON A FRAME WHEN HE TWISTED HIS BACK AND STRAINED A MUSCLE.

EMPLOYEE WAS DRILLING OUT A BOLT. THE DRILL BIT BROKE AND SPUN PIN OUT OF DRILL PRESS, WHICH FELL AND CUT LOWER RIGHT LEG.

WHILE REPAIRING CRANE, EE SLIPPED & JAMMED HIS LEFT THUMB ON THE BOOM OF THE CRANE.

EE WAS CLIMBING LADDER ON MACHINE, FOOT SLIPPED, FULL BACKWARD, LANDING ON A WATER PUMP.

EE WAS CLIMBING UP A LADDER, STOPPED AT 7' OR 8'. LADDER SLIPPED OUT FROM UNDER HIM & HE FELL, BREAKING THE FALL WITH HIS HANDS. *MADE 2ND VISIT TO PHYSICIAN ON 1/21/98.

EE STUMBLED ON A ROCK INFRONT OF THE LUNCH ROOM & TWISTED HIS RIGHT KNEE. THIS REPORT IS NOT A LOST TIME ACCIDENT,BUT FOLLOWUP CARE WAS REQUIREDON 6/11/97 & BMM RECD THIS INFO ON 6/19/97

EE WAS STANDING ON FLOP GATE AND HAD FORGOTTEN IT WAS A FLOP GATE HE WAS THINKING IT WAS CHUTE AND WAS THEREFORE ADEQUATELY LOCKED OUT BUT IT WASNT HE NOTED TWO PEOPLE UP IN THE CONTROL ROOM. HE WAS SLIPPING BOLTS OUT OF PLACE AND THE FLOP GATE ACTIVATED PINNING HIM AGAINST WALL OF CHUTE.

EMP WAS LIFTING A FORK ON A FORKLIFT AND HEARD A LOUD POP.

EMPLOYEE WAS CLIMBING UP A CHUTE WITH A PIECE OF STEEL AND WRENCHED HIS BACK.

WHEN EE REMOVED THE LAST BOLT HOLDING THE CENTER SHAFT IN PLACE, THE SHAFT DROPPED & PINCHED HIS LEFT PINKIE FINGER BETWEEN THE SHAFT END & THE CAGE.

EE WENT TO ASSIST ANOTHER EE IN PUSHING IN JAW PLATE WHILE PLATE WAS AGAINST THE WALL AT HIGH PRESSURE, HE ASKED THE SIGNAL MAN ATO BOOM DOWN SLOWLY. PLATE SNAPPED DOWN, CATCHING HIS FINGERS.

WHILE CROSSING A DITCH, STEPPED INTO DITCH AND SLIPPED ON CLAY MUD. EE TRIED TO BRACE HIMSELF WITH LEFT ARM AS HE WENT DOWN.

EMPLOYEE WAS HAMMERING WITH A SLAG HAMMER IN THE MINE MAINTENANCE SHOP WHEN A PIECE OF SLAG CHIPPED OFF AND LANDED IN HIS RIGHT EYE. EMPLOYEE WAS WEARING SAFETY GLASSES.

EE WAS CHASING TRESPASSERS NEAR THE MOBILE HOME PARKED ON THE FORMER MARINE MAGNESIUM PROPERTY WHEN HE TRIPPED OVER SOME ROCKS & FELL. EE BEGAN PHYSICAL THERAPY AROUND 11/21/95. HE HAD SURGERY ON THE SHOULDER ON 9/16/96.

FIRST EE SAID THAT HE HURT HIS BACK WHEN HE WAS SHIFTING GEARS. THEN WHEN WE MADE THE ACCIDENT REPORT OUT, HE SAID IT HAPPENED WHEN HE WENT OVER A BUMP IN THE ROAD. THE TRUCK WENT DOWN, HE WEN T UP AND CAME DOWN HARD IN SEAT.

OILER ATTEMPTED TO LUBE TAIL PULLEY ON CV-26B, ACCESS NOT ACCOMPLISHED SAFELY UNLESS SAFETY BELT IS USED. EMPLOYEE WAS NOT USING SAFETY BELT. HE SLIPPED AND HURT HIS BACK MUSCLES.

SLIPPED OFF BOULDER, LEFT FOOT GOT CAUGHT I BETWEEN ANOTHER BOULDER.

WAS REMOVING BALANCING SHAFT FROM STEDMAN CAGE. SHAFT TIPPED PINCHING LEFT RING FINGER AND LACERATING THE LENGTH OF IT HAD HAD REMOVED THE BOLTS ON THE STEEL PLATE AROUND THE SHAFT THINKING IT WOULD NOT SLIP BUT IT DID PINCHING FINGER BETWEEN PLATE AND CAGE.

EMPLOYEE WAS ASSIGNED TO SCRAP METAL CLEAN-UP. HE STATED HE TRIPPED ON A PIECE OF METAL AND FELL BACKWARDS HURTING HIS LOWER BACK-NO ONE WITNESSED THIS ACCIDENT.

GOT LIMESTONE DUST IN EYE

EMPLOYEE REMOVED ACCESS COVER BETWEEN BIN ANBD ROTATING AIR-LOCK VALVE. TO REMOVED BRIDGING MATERIAL. THE EMPLOYEE DID NOT TURN OFF ROTATING VALVE OR LOCK OUT DEVICE. PER COMPANY POLICY. THE E MPLOYEE DISLODGED SOME MATERIAL THAT FORCED HAND INTO ROTATING VALVE. THE EMPLOYEE LOST TO FIRST KNUCKLE ON LITTLE FINGER AND TO SECOND KNUCKLE ON RING FINGER OF LEFT HAND.

THROWING BAGS TO GROUND GOT HIT BY ONE WHILE WALKING BY

EMPLOYEE WAS ATTEMPTING TO FUEL CRANE AND DID NOT USE DESIGNED ACCESS, BUT WAS STANDING ON OUTRIGGER ATTEMPTING TO PULL HIMSELF UP ON THE CRANE DECK. THE EMPLOYEE'S FOOT SLIPPED AND HE CAUGHT HIMSELF ON HIS RIGHT HAND.

EMPLOYEE WAS WORKING UNDER CONVEYOR BELT 30' ABOVE GROUND LEVEL.A 3" ROCK BOUNCED OUT OF DISCHARGE HOPPER AND STRUCK EMPLOYEE ON LEFT SHOULDER.

INJURED WAS ASSISTING ANOTHER EMPLOYEE THE BACK HOE OPERATOR TO LOAD SOME BOLTS INTO THE LOADER BUCKET TO TRANSFER TO ANOTHER LOCATION. HE CLAIMED HE WAS LIFTING A HEAVY OBJECT AND THREW OUT HIS BACK.

PULLING ON HANDLE IT JAMMED A BIT STRAINED BACK

WHILE RUNNING LOADER AT FACE OF LARGE ROCK ROLLED OFF BANK JARRING LOADER. EMPLOYEE REPORTED INCIDENT BUT DID NOT INDICATE AN INJURY. HE BEGAN MISSING WORK ON AUGUST 1ST AND ON AUGUST 7TH REPO RTED THAT HIS ABSENCE WAS DUE TO A BACK INJURY SUSTAINED ON JULY 11TH.

MAN WAS CLEANING WATER TREATMENT MACHINE BY REMOVING PLATE PLATE HAD PRESSURE BEHIND IT AND WHEN IT WAS RELEASED IT PRESSED AGAINST THE TRACTOR AND CAUGHT MANS FINGER BETWEEN.

MOVING ELEVATOR SUPPORT LEG WITH 3 OTHER MEN, INTENDING TO SLOWLY LOWER TO THE GROUND, WHEN LEG DROPPED SUDDENLY AND LANDED ON MAN'S LEFT FOOT.

I,NAME & OTHER EMPLOYEE WERE INSTALLING CORRUGATED METAL SIDING. I,NAME WAS HOLDING THE METAL & OTHER EMPLOYEE WAS OVERHEAD DRILLING. A PIECE OF METAL SHAVINGS OR GRIT WENT PAST I,NAME SAFETY GLASSES & LODGED IN HIS EYE.

INJURED WAS SIDEMOUNTING TRUCK PARKED ON TRUCK WEIGH SCALE AT LOADOUT. FOOT SLIPPED AND HE CAUGHT HIMSELF WITH HIS ARM PULLING AND STRAINING THE RIGHT BICEP AND TENDON OF LOWER ARM.

MEN WERE WORKING AT CLEANUP ON A SCHEDULED DOWN DAY.CLEANING CONVEYOR TAIL PULLEY WITHOUT LOCKING OUT THE BELT.MECHANIC STARTED CONVEYOR.MAN WAS LEANING AGAINST BELT WHEN IT STARTED,MAN FELL A GAINST CONVEYORS FRAMES AND CRACKED HIS RIBS.

WALKING NEAR HIS AIRTRACK DRILL DRILL NOT OPERATING WHEN HE SLIPPED ON A WET MUDDY ROCK AND FELL ON HIS BACK THIS ACCIDENT OCCURRED OFF OF THE MINE PROPERTY ALONG THE COUNTY ROAD LEADING TO T HE PROPERTY WHERE ROCK EXCAVATION WAS BEING DONE TO WIDEN THE ROAD

MAN WAS SQUATTING DOWN PICKING UP SCRAP IRON AND LOST HIS BALANCE HE REACHED TO STEADY HIMSELF AND GRABBED A PIECE OF HOT STEEL

SEVERAL WELDERS WERE WELDING ON STORAGE SILOS.ALL EMPLOYEES HAD BEEN ISSUED DARK GLASSES FOR EYE PROTECTION AND TOLD TO WEAR THEM.SOMEHOW,HE GOT A FLASH,I SUSPECT HE WAS NOT WEARING HIS GLASSE S.

EMPLOYEE PULLING WELDING LEADS TO HIS WORK PLATFORM ABOUT 15 FEET ABOVE GROUND LEVEL. LEADS BEGAN FALLING OFF THE PLATFORM AND HE STILL HAD HIS ARM AROUND LEADS PULLING MUSCLE IN HIS SHOULDER. EMPLOYEE COMPLETED SHIFT ON 7-27-88. STILL HURTING ON 7-28-88 HE WENT TO DR. MINNER.

EMPLOYEE ARRIVED AT WORK ON 6-29-88 SHOWING OBVIOUS EXPOSURE TO POISON OAK HE IS UNSURE WHETHER THIS OCCURRED AT WORK OR AT HOME IT AT WORK HE COULD HAVE CONTACTED IT WHILE REMOVING STICKS AND ROOTS FROM CV02

WAS CLEANING SILO IN PREPARATION FOR WELDING WHEN A SMALL PARTICLE OF CEMENT BOUNCED BEHIND HIS SAFETY GLASSES AND ENTERED HIS EYE.

WHILE CLEANING 2FF THE ROCKS ON THE CONVEYOR EMPLOYEES HAND WAS HIT BY A ROCK

DURING THE PROC9SS OF WELDING OR CUTTING ON THE CLASSIFIERS AND BINS, EMPLOYEE COULD HAVE BEEN EXPOSED TO EPOXY PAINT FUMES

BAR EMPL WAS HO5DING ONTO PUTTING ON V-BELTS MOVED AND CAUGHT FINGER BETWEEN BAR AND ANOTHER PIECE OF STEEL.

USING CUTTING T2RCH,EMPL BURNED HAND WHILE MOVING ABOUT.

EMPLOYEE WAS EX1OSED TO FUMES WHILE PAINTING INSIDE OF A TANK

WHILE EMPLOYEE 4AS GUIDING CRANE AND MANBASKET GIVING INSTRUCTIONS FROM THE TOP OF BIN HE WAS EXPOSED TO FUMES EXCAPING FROM THE BIN

EMPL STRIPPING 0ORMS WITH HAMMER AND PARTICLE OF CONCRETE FLEW INTO RIGHT EYE.

EMPLOYEE WAS LI0TING A WACKER DOWN FROM A TRUCK WHEN HE FELT HIS BACK HAVING A SHARP PAIN IN THE LOWER BACK AREA.

EMPLOYEE WAS TI1HTENING BOLTS WHEN THE BOLT BROKE AND EMPLOYEE FELL BACKWARDS ON PIPE ROLLER

EMPLOYEE WAS SW3NGING HAMMER TO LINE CONCRETE FORM WORK WHEN HAMMER GLANCED OFF FORM AND CAUGHT LEFT INDEX FINGERTIP

EMPLOYEE WAS LO2SENING BOLTS AND PARTIALLY DISASSEMBLING THE HAMMERMILL WHNE HE SLIPPED AND FELL FROM THE HAMMERMILL HE HURT HIS HANDS FINGERS RT HIP AND FOOT AND LEFT LEG

EMPLOYEE WAS RU3NING A SAND BLASTER AND WAS HAVING DIFFICULTY BREATHING WHILE USING IT AT END OF DAY HE BEGAN TO FEEL NAUSEOUS

WHILE LIFTING AN OUTRIGGER PAD FROM A CRANE HE STRAINED HIS LOWER BACK.

EMPLOYEE WAS CUTTING A HOLE IN A RIBBER BELT WITH A POCKET KNIFE WHEN IT SLIPPED AND CUT THE TOP OF THE INDEX FINGER ON HIS RIGHT HAND. IT REQUIRED THREE STITCHES.

WHILE UNSCREWING THE WATER LINE FORMT HE WATER TRUCK HIS THUMB CAUGHT ON A METAL BAND & MADE A SMALL CUT ON IT REQURING 3 STITCHES.

THE EMPLOYEE WAS HELPING TWO OTHER EMPLOYEES LIFT SLAG POTS FROM THE GROUND TO THE BASE OF A TRUCK IN THE SCRAP AREA. DURING THE LIFTING PROCESS THE EMPLOYEE EXPERIENCED LOWER BACK PAIN.

EE WAS HELPING TO REMMOVE THE WATER VALVE ON T HE LOG WASHER IT FELL SMASHED HIS HAND AGAINST THE MACHINE.

EMPL SAWING PIECE OF LUMBER WITH SKILL SAW WHEN CORD SHORTED OUT AND BURNED INSULATION WHICH FLEW INTO HIS RIGHT EYE.