Registro de la MSHA sobre Brighton Plant #810 (ID de mina 2000662). Muertes, incidentes no mortales agrupados por año, operador y controlador actuales, y contexto de la mina.
Avísenme cuando se presente un nuevo incidente de la MSHA en Brighton Plant #810.
WET, ICE COLD WINTER, VERY SLICK CONDITIONS.
EE BENT OVER TO PICK UP A TOOL & FELT SHARP PAINS IN HIS BACK.
WENT INTO SAND HIT PIPE BURIED IN SAND APPROX. 3 FEET UP FROM WATER LEVEL.
STEPPED OFF CONVEYOR IN LOOSE SAND AND TWISTED ANKLE.
EMPL WAS LOADING VP RINGS INTO BACK OF A PICKUP TRUCK RINGS BEING LOADED SLIPPED CATCHING FINGER BETWEEN RINGS IN HAND AND THOSE ALREADY IN TRUCK EMPLS R MIDDLE FINGER WAS CRUSHED AND LACERATE D
EMPLOYEE WAS HELPING TO LOAD SCRAP STEEL ONTO A TRUCK WHILE CHAINING A PIPE TO LOADER MACHINE BACKED UP CAUSING PIPE TO STRIKE A I-BEAM WHICH FELL ON EMPLOYEE FOOT RESULTING IN FX
EMPLOYEE WAS OPERATING DRAGLINE. HE STATES THAT HE STOPPED THE BUCKET TO FAST CAUSING THE MACHINE TO ROCK UP ON ONE TRACK. WHEN MACHINE RETURNED TO NORMAL POSTION, IT SNAPPED HIM BACKWARDS, STRAINING LOWER BACK.
EMPLOYEE WAS USING AN ELECTRIC GRINDER ON A PIECE OF A MUFFLER AND DEBRIS STRUCK HIM IN THE EYE.
EMPLOYEE STEPPED ACROSS PUDDLE OF WATER, TWISTING KNEE WHEN HE PUT WEIGHT ON FORWARD LEG.
EMPLOYEE STEPPED OFF TAILGATE OF PICKUP TRUCK ONTO STORAGE DECK OF WELDING SUPPLIES & STEPPED ON EDGE OF A BEAM TWISTING ANKLE THIS RESULTED IN A SEVERE SPRAIN TO THE LEFT ANKLE
EMPLOYEE WAS LOOSENING ADJUSTMENT NUT ON DRAG FRICTION WHEN THE WRENCH SLIPPED OFF THE NUT AND PINCHED THE LITTLE FINGER ON LEFT HAND BETWEEN THE WRENCH AND THE DRAG CABLE.
WHILE WORKING ON GREASE GUN CRESENT WRENCH SLIPPED OFF GREASE GUN CAUSING FINGER TO HIT STEEL BENCH CAUSING LACERATION TO FINGER.
I.NAME WAS PICKING CLAY BALLS OF OF #. CONVEYOR BELT WHEN IN THE PROCESS OF LEANING OVER THE BELT CAUSED INJURY TO NERVE IN BACK SPINAL NERVE COMPRESSION
I NAME WAS SHOVELING PIT RUN RAW MATERIAL OUT OF CONVEYER GATHERING HOPPER ON THE FIELD BELT LINE STRAINED GROIN IN THE PROCESS RESULTING IN A HERNIA SAW DOCTOR ON 3/25/88 AND WAS ADVISED TO KEEP WORKING UNLESS IT GOT WORSE. HERNIA DID GET WORSE AND 1 NAME IS OFF WORK AS OF 5/4/88 FOR REPAIR OF HERNIA
I NAME WAS CLSO3NG THE LARGE SLIDING DOORS ON THE MONIGHN DRAGLINE. IN DOING SO HE PINCHED HIS RT THUMB BETWEEN THE DOORS. LACERATIONS AND TIP FRACTURE TO RT THUMB
I NAME WAS DOIN1 ARC WELDING ON PIT CONSTRUCTION PROJECT. RECEIVED FLASH BURNS TO BOTH EYES.
I.NAME WAS USIN1 A 48" PIPE WRENCH INT HE PROCESS OF REMOVING A 4" NIPPLE FROM A CHECK VALVE. THE WRENCH SLIPPED OFF THE NIPPLE & I.NAME LOST HIS FOOTING & FELL TO THE FLOOR. FALL FRACTURED HIS 9TH RIB. 3
CALDWELL WAS HAMMERING ON HOIST CABLE THAT HAD LODGED BETWEEN POINT SHEAVE AND BOOM FRAMEWOEK.HAMMERING CAUSED INJURY TO ROTATER CUFF OF RIGHT SHOULDER.
I NAME WAS HELPING TO REMOVE OIL CONTACTOR ASSEMBLY COVER FROM UNDERNEATH THE P&H 1800 ELECTRIC AXCAVATOR.IN LOWERING THE COVER THE WEIGHT OF IT CAUSED A BILATERAL INGUINAL HERNA.WORKING IN A VERY ENCLOSED AREA.NO ROOM TO STAND UP UNDERNEATH THE MACHINE.
I NAME WAS WALKING ON TOP OF DRAGLINE BASE THAT HAD BEEN REMOVED FROM THE MONIGHAN DRAGLINE FOR REPAIRING BASE WAS SNOW COVERED AND HE STEPPED ON A CMANHOLE COVER, WHICH WAS LOOSE, AND HE FELL
EMPLOYEE WAS IN THE PROCESS OF LIFTING AND MOVING A PART OF THE SUSPENSION CABLE ON THE FIELD HOPPER CONVEYOR AND AS HE TURNED WIHT IT HE STRAINED HIS BACK