Bulldog Mine tiene $53K en multas propuestas de MSHA y $0 pendientes en 2 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Bulldog Mine.
Muertes
0
Incidentes totales
19
Años en registro
1983–2013
Último incidente
May 2013
Historial de cumplimiento
Citaciones de MSHA desde 2012
11
citaciones
2
significativas y sustanciales
$53,360
multas propuestas
$1,860
pagado a la fecha
3% de las multas propuestas pagadas a la fecha, una diferencia de $51,500.
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Actividad de inspección
Inspecciones de MSHA desde 2012
24
inspecciones registradas
368
horas de inspección
n/d
citaciones por 100 horas de inspección
ⓘEsta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.
Tasa retenida: 368 horas de inspección son muy pocas para una tasa estable. Se requiere un mínimo de 1,000 horas de inspección.
Fuente: datos de inspecciones de MSHA, actualizados semanalmente.
Bulldog Mine tiene $53K en multas propuestas de MSHA y $0 pendientes en 2 expedientes impugnados.
Disposicion de multas
ⓘLas diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.
$53K
multas propuestas
$2K
evaluacion actual
$2K
pagado a la fecha
$0
pendiente
9 evaluaciones son ordenes finales; 2 expedientes impugnados.
Al ultimo periodo de evaluacion el 2023-08-22.
Fuente: datos de infracciones evaluadas y de conferencia/litigio de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
ⓘCitaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Equipment operator was trimming the face, back, and ribs with an excavator with a road header attachment. He finished trimming and was starting to tram back out. Operator traveled 4 feet and went over uneven floor causing his left arm to activate the swing arm lever to the left. The road header swung to the left striking the injured employee.
Employee was emptying bags of cement in the dry pot machine and had all his PPE on. Employee started to sweat and the sweat ran down thru his goggles and into his eyes. After the task was completed, he took his goggles off and rubbed his left eye irritating it.
Employee picked up a full can of welding rod by grasping the sharp edge of the top. The weight of the can caused the sharp edge to cut through employee's leather glove and into his left index finger. He received 5 sutures.
The injured employee was struck by a wooden post that had come under compression from the scissor deck he was operating. The post was left leaning against the rail of the scissor deck. When the deck was raised, the post became wedged between the deck and the rib, the pressure was relieved suddenly from the base of the post causing it to strike him in the elbow and ribs.
1988 · 1 incidente
6 de agosto de 1988CO · Metal/No metálicoOperario de banco, CanteroNEUMOCONIOSIS (ENFERMEDAD PULMONAR POR POLVO)
CONDITIONS CONTRIBUTING TO ILLNESS AND EXTENT OF ILLNESS ARE UNDETERMINED AT THIS TIME
1987 · 1 incidente
25 de agosto de 1987CO · Metal/No metálicoAlmacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavadoRESBALÓN O CAÍDA DE PERSONA
MINER WAS LOADI3G LIFTERS AND KNEE HOLES. MINER WAS BENT OVER PLACING POWDER IN HOLES, REACHED OVER TO PICK UP LOADING STICK TO TAMP POWDER AND TWISTED HIS BACK.
1985 · 1 incidente
27 de julio de 1985CO · Metal/No metálicoEnsayador, Geólogo, Metalurgista, Ingeniero, Gerencia de ingenieríaMAQUINARIA
EMP WAS LOOSENING LUG NUTS WITH A PNEUMATIC IMPACT WRENCH WHEN HE FELT A SHARP PAIN IN LOWER BACK HE WAS STANDING WITH IMPACT WRENCH IN HAND AND TURNED TO APPLY THE WRENCH TO THE LUG NUT
1984 · 7 incidentes
7 de septiembre de 1984CO · Metal/No metálicoOperario de banco, CanteroMAQUINARIA
THE MANCHA LOCOMOTIVE COLLIDED WITH A MUCK HAUL LOCOMOTIVE. I NAME BUMPED HIS KNEE ON THE INSIDE OF THE OPERATOR\S CAB UPON IMPACT. THE EXAMINING PHYSICIAN RELEASED HIM FOR IMMEDICATE DUTY BUT THE BRUISED KNEE REQUIRED A RETURN VISIT TO HAVE FLUID DRAINED.
2 de julio de 1984CO · Metal/No metálicoMaestro electricistaELÉCTRICO
EMPLOYEE WAS DRILLING WITH JUMBO. HE RELEASED FEED MOTOR TO RETRACT STEEL AND THE FEED MOTOR PRESSED AGAINST LITTLE FINGER ON HIS RIGHT HAND CAUSING A LACERATION.
EMP WAS COUPLING ELECTRIC MOTOR TO TRAIN CAR - MOTOR ROLLED INTO CAR PINCHING INDEX FINGER OF RIGHT HAND BETWEEN COUPLERS. SMASHED AND LACERATED TIP OF INDEX FINGER
19 de octubre de 1983CO · Metal/No metálicoOperador perforadorMAQUINARIA
EMPLOYEE WAS DRILLING WITH JACKLEG, MACHINE GOT OFF BALANCE, SLIPPED, PINCHING EMPLOYEES INDEX FINGER ON RIGHT HAND BETWEEN MACHINE AND LEG STOP. 4 STITCHES REQUIRED.
20 de mayo de 1983CO · Metal/No metálicoOperario de banco, CanteroMAQUINARIA
DRILLING WITH JUMBO IN TRACK HEADING CAUGHT HAND BETWEEN MACHINE AND RIB WHILE MOVING DRILL BOOM INJURED FLESHY TISSUE BETWEEN THUMB AND INDEX FINGER ON LEFT HAND REQUIRING FIVE STITCHES
23 de marzo de 1983CO · Metal/No metálicoGerente de mina, Capataz de mina, Propietario de minaMAQUINARIA
MR SEIME WAS OBSERVING A TRACK DRIFTR CREW DEILL WHEN THE WOODEN SLACKING FROM ROOF JACK VIBRATED LOOSE ALLOWING THE SLACK TO FALL ON HIS HAND CUT FINGER STITCHES REQUIRED
For insurers, brokers, and safety consultants
The full compliance file on Bulldog Mine
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.