While maintenance on the stabilizer bracket for 6A Head pulley gearbox at the dry plant miner #1 removed the bolt off the stabilizer bracket, once the bolt was removed the gear box motor abruptly turned ultimately stopping at the structure I-Beam below. Miner #1 right hand was stuck in between the gear box motor and the I-Beam
Burleson Sand Metal/Non-Metal
Burleson Sand tiene $16K en multas propuestas de MSHA y $0 pendientes en 1 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Burleson Sand.
- Muertes
- 0
- Incidentes totales
- 4
- Años en registro
- 2019–2023
- Último incidente
- Jan 2023
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Burleson Sand tiene $16K en multas propuestas de MSHA y $0 pendientes en 1 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 35,623 | 0 | 0 | 0.0 |
| 2025 Q3 | 33,813 | 0 | 0 | 0.0 |
| 2025 Q2 | 24,683 | 6 | 1 | 243.1 |
| 2025 Q1 | 22,190 | 8 | 2 | 360.5 |
| 2024 Q3 | 19,885 | 0 | 0 | 0.0 |
| 2024 Q2 | 18,882 | 12 | 6 | 635.5 |
| 2024 Q1 | 23,390 | 7 | 1 | 299.3 |
| 2023 Q4 | 22,117 | 0 | 0 | 0.0 |
Mostrar 20 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2023 Q3 | 26,808 | 1 | 0 | 37.3 |
| 2023 Q2 | 36,358 | 3 | 0 | 82.5 |
| 2023 Q1 | 34,270 | 0 | 0 | 0.0 |
| 2022 Q4 | 35,464 | 0 | 0 | 0.0 |
| 2022 Q3 | 42,822 | 1 | 0 | 23.4 |
| 2022 Q2 | 43,066 | 0 | 0 | 0.0 |
| 2022 Q1 | 28,192 | 0 | 0 | 0.0 |
| 2021 Q4 | 26,662 | 2 | 1 | 75.0 |
| 2021 Q3 | 14,162 | 0 | 0 | 0.0 |
| 2021 Q2 | 2,167 | 0 | 0 | 0.0 |
| 2021 Q1 | 843 | 0 | 0 | 0.0 |
| 2020 Q4 | 12,304 | 1 | 0 | 81.3 |
| 2020 Q3 | 8,851 | 3 | 0 | 338.9 |
| 2020 Q2 | 14,664 | 0 | 0 | 0.0 |
| 2020 Q1 | 58,049 | 1 | 0 | 17.2 |
| 2019 Q4 | 56,310 | 0 | 0 | 0.0 |
| 2019 Q3 | 68,578 | 2 | 2 | 29.2 |
| 2019 Q2 | 57,041 | 1 | 0 | 17.5 |
| 2019 Q1 | 38,517 | 2 | 0 | 51.9 |
| 2018 Q4 | 26,748 | 0 | 0 | 0.0 |
Incidentes reportables
4 en archivo2023 · 1 incidente
2022 · 1 incidente
While replacing the wiper on DC 6A, Miner #1 cut 95% of the shaft and made decision to kick the shaft to break it. Miner #2 outside of the chute/guard section was holding the shaft to stop it from falling, when miner #1 kicked the wiper shaft it caused the shaft to abruptly move consequently pinching miner #2 Right thump between the guard/chute and the wiper shaft.
2019 · 2 incidentes
While removing the tail section door from belt elevator 6, the employee working the manual chain hoist placed EE's hand approx. 1 ft below the chain on the support structure of the elevator. The door shifted causing temporary slack in the chain which caused the chain to shift down and ultimately pinching the employees left thumb between the chain hoist and the elevator structure.
At approx. 8:45 PM on 06/07/2019, employee suffered a left radial styloid facture due to a fall from a conveyor belt.
The full compliance file on Burleson Sand
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.