Received a CWP diagnosis on 5/21/2018 for EE. EE last worked on 2/21/2017.
Cabin Ridge Surface Mine Coal
Cabin Ridge Surface Mine tiene $12K en multas propuestas de MSHA y $0 pendientes en 3 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Cabin Ridge Surface Mine.
- Muertes
- 0
- Incidentes totales
- 12
- Años en registro
- 2015–2018
- Último incidente
- May 2018
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Cabin Ridge Surface Mine tiene $12K en multas propuestas de MSHA y $0 pendientes en 3 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en Cabin Ridge Surface Mine muestra un polvo respirable de carbon promedio de 0.12 mg/m3 (100% en cumplimiento) en 142 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2019 Q1 | 480 | 0 | 0 | 0.0 |
| 2018 Q4 | 4,986 | 0 | 0 | 0.0 |
| 2018 Q3 | 3,351 | 1 | 0 | 298.4 |
| 2018 Q2 | 18,387 | 0 | 0 | 0.0 |
| 2018 Q1 | 28,570 | 4 | 2 | 140.0 |
| 2017 Q4 | 27,870 | 4 | 0 | 143.5 |
| 2017 Q3 | 29,544 | 4 | 2 | 135.4 |
| 2017 Q2 | 31,166 | 1 | 0 | 32.1 |
Mostrar 12 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2017 Q1 | 38,851 | 2 | 0 | 51.5 |
| 2016 Q4 | 31,889 | 2 | 1 | 62.7 |
| 2016 Q3 | 38,475 | 6 | 0 | 155.9 |
| 2016 Q2 | 35,197 | 0 | 0 | 0.0 |
| 2016 Q1 | 35,880 | 4 | 0 | 111.5 |
| 2015 Q4 | 31,236 | 0 | 0 | 0.0 |
| 2015 Q3 | 28,732 | 5 | 2 | 174.0 |
| 2015 Q2 | 29,641 | 2 | 0 | 67.5 |
| 2015 Q1 | 16,436 | 6 | 4 | 365.1 |
| 2014 Q4 | 5,882 | 0 | 0 | 0.0 |
| 2014 Q3 | 0 | 0 | 0 | |
| 2014 Q2 | 0 | 0 | 0 |
Incidentes reportables
12 en archivo2018 · 3 incidentes
Employee was assisting in maintenance when EE was struck by a small piece of metal that was cast from a hammer strike by another employee. Employee was approx. 20' away from where the other employee was using the hammer. The small piece of metal was removed and the employee received two stitches.
EE was coming down in bucket to get equipment, leveling cable broke and bucket went forward and dumped EE out. EE has 4 broken ribs, broke collarbone, broke EE's glasses and laceration near right eye.
2016 · 4 incidentes
An employee was striking a chisel with a 3 pound hammer to spread top of roller stand open after taking bolts out. Injured was standing about 10' away from stand when a piece broke off the stand hitting injured on left arm resulting in a puncture hole in arm requiring stitches. Injured was supervising the work being done.
Received a CWP diagnosis for employee.
Employee was using a 1" air impact wrench to remove bolts from a cutting edge lip protector on a 993K CAT loader. EE was removing a bolt and it began to rotate. EE pushed up on the bolt and bumped the rotation of the air impact hoping the bolt would lock back into position but instead the bolt spun causing a laceration to EE's left index finger. This resulted in 17 stitches.
Received a CWP claim for employee.
2015 · 5 incidentes
Received a CWP diagnosis for employee from Worker's Comp. He was termed on 9/25/2015.
Employee was operating CAT 785C when he went through a swag in the haul road causing his body to move side to side resulting in pain in his lower back.
Received a CWP diagnosis for employee. No % disability at this time.
Received a hearing loss diagnosis for employee. He last worked on 6/25/15. No % disability at this time.
Received a CWP claim for EE. No % disability at this time.
The full compliance file on Cabin Ridge Surface Mine
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.