Canyon Resources tiene $8K en multas propuestas de MSHA y $151 pendientes en 4 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Avísenme cuando se presente un nuevo incidente de la MSHA en Canyon Resources.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 4,623 | 1 | 0 | 216.3 |
| 2025 Q3 | 5,304 | 0 | 0 | 0.0 |
| 2025 Q2 | 5,425 | 0 | 0 | 0.0 |
| 2025 Q1 | 5,696 | 0 | 0 | 0.0 |
| 2024 Q4 | 6,478 | 0 | 0 | 0.0 |
| 2024 Q3 | 6,748 | 0 | 0 | 0.0 |
| 2024 Q2 | 6,748 | 0 | 0 | 0.0 |
| 2024 Q1 | 6,777 | 0 | 0 | 0.0 |
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2023 Q4 | 6,499 | 0 | 0 | 0.0 |
| 2023 Q3 | 7,983 | 0 | 0 | 0.0 |
| 2023 Q2 | 6,406 | 1 | 0 | 156.1 |
| 2023 Q1 | 5,963 | 0 | 0 | 0.0 |
| 2022 Q4 | 6,008 | 0 | 0 | 0.0 |
| 2022 Q3 | 4,394 | 0 | 0 | 0.0 |
| 2022 Q2 | 6,632 | 0 | 0 | 0.0 |
| 2022 Q1 | 5,386 | 3 | 0 | 557.0 |
| 2021 Q4 | 6,014 | 0 | 0 | 0.0 |
| 2021 Q3 | 4,691 | 0 | 0 | 0.0 |
| 2021 Q2 | 4,978 | 0 | 0 | 0.0 |
| 2021 Q1 | 4,232 | 0 | 0 | 0.0 |
| 2020 Q4 | 5,576 | 0 | 0 | 0.0 |
| 2020 Q3 | 4,593 | 0 | 0 | 0.0 |
| 2020 Q2 | 4,765 | 0 | 0 | 0.0 |
| 2020 Q1 | 5,740 | 1 | 0 | 174.2 |
| 2019 Q4 | 5,487 | 12 | 5 | 2187.0 |
| 2019 Q3 | 5,385 | 0 | 0 | 0.0 |
| 2019 Q2 | 7,154 | 1 | 0 | 139.8 |
| 2019 Q1 | 6,164 | 0 | 0 | 0.0 |
| 2018 Q4 | 6,223 | 2 | 0 | 321.4 |
| 2018 Q3 | 6,781 | 0 | 0 | 0.0 |
| 2018 Q2 | 5,637 | 1 | 0 | 177.4 |
| 2018 Q1 | 6,714 | 0 | 0 | 0.0 |
| 2017 Q4 | 6,298 | 1 | 0 | 158.8 |
| 2017 Q3 | 6,852 | 0 | 0 | 0.0 |
| 2017 Q2 | 5,941 | 1 | 0 | 168.3 |
| 2017 Q1 | 7,007 | 0 | 0 | 0.0 |
| 2016 Q4 | 9,370 | 1 | 0 | 106.7 |
| 2016 Q3 | 7,429 | 0 | 0 | 0.0 |
| 2016 Q2 | 6,918 | 0 | 0 | 0.0 |
| 2016 Q1 | 5,609 | 1 | 1 | 178.3 |
| 2015 Q4 | 5,941 | 0 | 0 | 0.0 |
| 2015 Q3 | 5,793 | 0 | 0 | 0.0 |
| 2015 Q2 | 5,616 | 2 | 0 | 356.1 |
| 2015 Q1 | 5,718 | 0 | 0 | 0.0 |
| 2014 Q4 | 3,956 | 0 | 0 | 0.0 |
| 2014 Q3 | 4,149 | 0 | 0 | 0.0 |
| 2014 Q2 | 3,993 | 2 | 1 | 500.9 |
| 2014 Q1 | 3,522 | 1 | 0 | 283.9 |
| 2013 Q4 | 3,289 | 0 | 0 | 0.0 |
| 2013 Q3 | 5,142 | 0 | 0 | 0.0 |
| 2013 Q2 | 4,742 | 0 | 0 | 0.0 |
| 2013 Q1 | 4,332 | 0 | 0 | 0.0 |
| 2012 Q4 | 4,117 | 1 | 0 | 242.9 |
| 2012 Q3 | 4,203 | 1 | 0 | 237.9 |
| 2012 Q2 | 3,975 | 0 | 0 | 0.0 |
| 2012 Q1 | 5,004 | 2 | 1 | 399.7 |
| 2011 Q4 | 5,256 | 0 | 0 | 0.0 |
| 2011 Q3 | 6,596 | 0 | 0 | 0.0 |
| 2011 Q2 | 6,683 | 0 | 0 | 0.0 |
| 2011 Q1 | 5,217 | 0 | 0 | 0.0 |
| 2010 Q4 | 4,068 | 0 | 0 | 0.0 |
| 2010 Q3 | 3,148 | 0 | 0 | 0.0 |
| 2010 Q2 | 3,862 | 2 | 0 | 517.9 |
| 2010 Q1 | 3,405 | 1 | 0 | 293.7 |
| 2009 Q4 | 3,485 | 0 | 0 | 0.0 |
| 2009 Q3 | 3,573 | 0 | 0 | 0.0 |
| 2009 Q2 | 4,641 | 0 | 0 | 0.0 |
| 2009 Q1 | 4,195 | 1 | 0 | 238.4 |
| 2008 Q4 | 4,459 | 2 | 0 | 448.5 |
| 2008 Q3 | 6,325 | 0 | 0 | 0.0 |
| 2008 Q2 | 6,025 | 0 | 0 | 0.0 |
| 2008 Q1 | 5,214 | 0 | 0 | 0.0 |
| 2007 Q4 | 5,110 | 1 | 0 | 195.7 |
| 2007 Q3 | 4,967 | 1 | 0 | 201.3 |
| 2007 Q2 | 5,983 | 0 | 0 | 0.0 |
| 2007 Q1 | 5,452 | 0 | 0 | 0.0 |
| 2006 Q4 | 7,253 | 0 | 0 | 0.0 |
| 2006 Q3 | 6,210 | 2 | 1 | 322.1 |
| 2006 Q2 | 6,332 | 0 | 0 | 0.0 |
| 2006 Q1 | 5,149 | 0 | 0 | 0.0 |
| 2005 Q4 | 5,138 | 0 | 0 | 0.0 |
| 2005 Q3 | 3,745 | 0 | 0 | 0.0 |
| 2005 Q2 | 4,153 | 0 | 0 | 0.0 |
| 2005 Q1 | 3,204 | 0 | 0 | 0.0 |
| 2004 Q4 | 3,576 | 8 | 0 | 2237.1 |
| 2004 Q3 | 4,585 | 0 | 0 | 0.0 |
| 2004 Q2 | 3,742 | 6 | 0 | 1603.4 |
| 2004 Q1 | 1,518 | 0 | 0 | 0.0 |
EE was adjusting the press when EE stepped back and slipped, falling to the ground. EE injured EE's ankle, knee and back and was put on light duty. Diagnosis pending.
Miner pulled himself up by grabbing onto a pipe and felt a pop in their hand.
Roller shaft slipped during maintenance activity and smashed miner's thumb
Miner was working to free a motor that appeared seized. The pipe wrench being used to spin the sprocket broke loose, smashing the Miners right ring finger. Laceration was vertical from the front of the finger, over the top and down the back side. The miners fingernail was removed and 7 stitches were used.
Climbing down vertical ladder off of the filter press. Employee got a sharp pain in wrist and thumb area of left hand.
Miner was walking on wet concrete surface when he slipped and landed flat on his back. Resulted in Buttock Contusion/ sprain. X-ray taken and miner was put on light duty until X-ray could be reviewed. X-ray was negative and worker was returned to job of injury.
Miner was doing maintenance work and decided to assist another miner to move a Lower concave ring. The injured miner placed the end of a 6' pry bar onto a hole in the concave ring. As he attempted to move the ring, the bar slipped and the miner fell to the ground spraining his right ankle.
Two miners were installing a control center cover. One miner accidentally allowed the cover to slip and that pinched the other miners left index finger between the cover and the machine. This caused a laceration which required stitches.
Operator complained of pain in left shoulder. Operator stated that condition was ongoing for some time. The operator asked that he run a different piece of equipment to relieve the symtoms and we complied with his wishes.
Employee slipped and fell onto posterior and left shoulder. Level concrete paved surface. Slippery due to inclimate weather.
Worker was using a razor knife to cut a piece of conveyor belt. Worker lost control of tool and inflicted a 5cm cut to his left forarm.
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.