Employee was scaling the top with a slate bar as he was checking the mine and as he was pulling a piece rock, a piece slid down the bar and hit his left thumb, causing the bone in the tip of his finger to be broken.
Conaway Creek Deep Mine Coal
Conaway Creek Deep Mine tiene $320K en multas propuestas de MSHA y $197K pendientes en 21 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Conaway Creek Deep Mine.
- Muertes
- 0
- Incidentes totales
- 12
- Años en registro
- 2005–2011
- Último incidente
- Jan 2011
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Conaway Creek Deep Mine tiene $320K en multas propuestas de MSHA y $197K pendientes en 21 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en Conaway Creek Deep Mine muestra un polvo respirable de carbon promedio de 0.52 mg/m3 (96% en cumplimiento) en 378 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2015 Q4 | 0 | 0 | 0 | |
| 2015 Q3 | 4,658 | 1 | 0 | 214.7 |
| 2015 Q2 | 11,843 | 104 | 30 | 8781.6 |
| 2015 Q1 | 19,509 | 104 | 36 | 5330.9 |
| 2014 Q4 | 12,341 | 32 | 6 | 2593.0 |
| 2014 Q3 | 4,971 | 32 | 7 | 6437.3 |
| 2014 Q2 | 0 | 0 | 0 | |
| 2014 Q1 | 0 | 5 | 0 |
Mostrar 33 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2013 Q4 | 0 | 5 | 1 | |
| 2013 Q3 | 0 | 2 | 0 | |
| 2013 Q2 | 0 | 2 | 0 | |
| 2012 Q3 | 6,548 | 0 | 0 | 0.0 |
| 2012 Q2 | 310 | 2 | 0 | 6451.6 |
| 2012 Q1 | 6,193 | 38 | 24 | 6136.0 |
| 2011 Q4 | 7,348 | 22 | 6 | 2994.0 |
| 2011 Q3 | 1,330 | 4 | 2 | 3007.5 |
| 2011 Q2 | 573 | 15 | 6 | 26178.0 |
| 2011 Q1 | 179 | 1 | 0 | 5586.6 |
| 2010 Q4 | 363 | 5 | 0 | 13774.1 |
| 2010 Q3 | 14,466 | 41 | 10 | 2834.2 |
| 2010 Q2 | 17,168 | 65 | 20 | 3786.1 |
| 2010 Q1 | 12,395 | 21 | 9 | 1694.2 |
| 2009 Q4 | 0 | 0 | 0 | |
| 2009 Q3 | 4,088 | 6 | 0 | 1467.7 |
| 2009 Q2 | 6,850 | 7 | 1 | 1021.9 |
| 2009 Q1 | 6,544 | 25 | 6 | 3820.3 |
| 2008 Q4 | 6,435 | 19 | 2 | 2952.6 |
| 2008 Q3 | 6,209 | 27 | 3 | 4348.5 |
| 2008 Q2 | 8,838 | 12 | 1 | 1357.8 |
| 2008 Q1 | 8,725 | 12 | 3 | 1375.4 |
| 2007 Q4 | 9,177 | 25 | 3 | 2724.2 |
| 2007 Q3 | 8,017 | 5 | 1 | 623.7 |
| 2007 Q2 | 7,823 | 28 | 7 | 3579.2 |
| 2007 Q1 | 7,911 | 22 | 7 | 2780.9 |
| 2006 Q4 | 7,938 | 0 | 0 | 0.0 |
| 2006 Q3 | 7,518 | 3 | 0 | 399.0 |
| 2006 Q2 | 6,870 | 6 | 2 | 873.4 |
| 2006 Q1 | 7,274 | 6 | 2 | 824.9 |
| 2005 Q4 | 7,517 | 4 | 1 | 532.1 |
| 2005 Q3 | 4,830 | 3 | 1 | 621.1 |
| 2003 Q3 | 220 | 0 | 0 | 0.0 |
Incidentes reportables
12 en archivo2011 · 1 incidente
2010 · 1 incidente
EE was cutting tape off of a measuring stick and cut his left thumb.
2009 · 1 incidente
Employee was tightening bolts on fan motor. Base moved and motor fell on left hand. Fractured left middle finger, cut ring finger, middle finger and pinky finger. Employee had to have stitches in all three fingers.
2007 · 5 incidentes
Employee claimed he was reaching for supplies when his knee slipped and slid down between tire and frame of the roof bolter he was operating resulting in his knee being twisted. The roof bolter was stationary at the time of injury.
Employee was cleaning #7 entry with scoop in low coal seam. While moving forward with scoop, he struck coal rib with bucket causing scoop to buckle somewhat in the center section causing him to strike his head on the mine roof resulting in employee complaining with pain in back of neck.
Employee started complaining of knee pain to the left knee.
Employee was loading parts and supplies, tripped and fell with a hydraulic boom jack in his hands. When he fell he caught his finger between the jack and the metal frame of a Mac 8 transport buggy resulting in a fractured fingertip and cut.
Injured EE and another EE were drilling an anchor hole in the mine floor to anchor belt tail piece with a hyd drill. The augar got entangled in a tool pouch, hanging from the other EE's belt, causing injured EE's fingers to become twisted around the handle of the drill. This resulted in a fracture of the middle and ring fingers of the right hand.
2006 · 2 incidentes
Miner operator was loading coal into shuttle car. When the car moved forward, the tire rolled into miner operators foot. (Remote miner) This resulted in bruising around the ankle and side of foot.
Employee and section foreman was attempting to move miner cable out of the haulageway. When He pulled on the cable, he sprained his back.
2005 · 2 incidentes
EMPLOYEE WAS INSTALLING ROOF BOLTS & AS HE STARTED TO DRILL A HOLE A PIECE OF DRAW ROCK APPROX. 1.5"THICK X 1'WIDE X 2'LONG, DISLODGED & FELL STRIKING HIM ON THE LEFT ELBOW RESULTING IN DEEP BRUISING.
AFTER BEING LOADED BY THE CONTINUOUS MINER, THE S/C OPERATOR PROCEEDED OUT OF THE #7 HEADING TOWARD THE DUMPING POINT. AS HE MADE THE TURN AROUND THE CORNER THE REAR OF THE S/C STRUCK EE WHO WAS KNEELING WITH HIS BACK TURNED AWAY FROM THE OPERATOR & S/C HANGING LINE CURTAIN THAT HAD FALLEN DOWN.
The full compliance file on Conaway Creek Deep Mine
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.