Employee missed step on ladder on way down and injured right calf muscle.
D-5 Mine: 765 citaciones de la MSHA Coal
D-5 Mine tiene $232K en multas propuestas de MSHA y $100K pendientes en 47 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en D-5 Mine.
- Muertes
- 0
- Incidentes totales
- 39
- Años en registro
- 2010–2017
- Último incidente
- Feb 2017
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.D-5 Mine tiene $232K en multas propuestas de MSHA y $100K pendientes en 47 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 108 · 100%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| KENT 2018-0240 | Settlement | Rae | 2018 | $37K → $21K |
| KENT 2014-490 | Settlement | Gill | 2015 | $9K → $7K |
| KENT 2014-0633 | Settlement | Feldman | 2015 | $8K → $6K |
| KENT 2012-1491 | Settlement | Feldman | 2013 | $6K → $4K |
| KENT 2014-0272 | Settlement | Andrews | 2014 | $6K → $4K |
| KENT 2014-0332 | Settlement | Andrews | 2014 | $5K → $3K |
El muestreo de MSHA en D-5 Mine muestra que 99% de 1,161 muestras de polvo respirable de carbón cumplieron el estandar de 1.5 mg/m3.
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Polvo respirable de carbón
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
Última medición: 2018-05-22, hace 8 años
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
El valor de concentración excesiva (ECV) es el umbral de aplicación por muestra de la propia MSHA, que incorpora la incertidumbre de medición; una muestra por encima de su ECV puede motivar una citación. El conteo cubre solo las muestras a las que MSHA asignó un ECV.- CONTINUOUS MINER OPERATOR530
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)170
- SHUTTLE CAR OPERATOR (STANDARD SIDE)68
Sílice (cuarzo)
Última medición: 2018-05-15, hace 8 años- CONTINUOUS MINER OPERATOR21
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)2
Ruido
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.
Última medición: 2018-05-09, hace 8 años
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.- SHUTTLE CAR OPERATOR (STANDARD SIDE)31
- ROOF BOLTER (TWIN HEAD) (INTAKE SIDE)24
- CONTINUOUS MINER OPERATOR22
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.| Año | dentro de 1.5 mg/m3 | muestras |
|---|---|---|
| 2018 | 100% | 84 |
| 2017 | 100% | 172 |
| 2016 | 97% | 144 |
| 2015 | 100% | 60 |
| 2014 | 100% | 86 |
| 2013 | 96% | 144 |
| 2012 | 100% | 137 |
| 2011 | 100% | 136 |
| 2010 | 99% | 113 |
| 2009 | 99% | 85 |
| Año | sílice prom. (%) | muestras |
|---|---|---|
| 2018 | 9.3 | 4 |
| 2017 | 5.1 | 5 |
| 2016 | 6.0 | 6 |
| 2015 | 6.5 | 6 |
| 2014 | 8.9 | 2 |
| 2013 | 9.9 | 4 |
| 2012 | 7.5 | 2 |
| 2010 | 10.1 | 6 |
| 2009 | 8.7 | 4 |
| Año | sobre el LPE | muestras |
|---|---|---|
| 2018 | 20% | 10 |
| 2017 | 7% | 15 |
| 2016 | 0% | 23 |
| 2015 | 8% | 12 |
| 2014 | 0% | 10 |
| 2013 | 0% | 19 |
| 2012 | 4% | 25 |
| 2011 | 15% | 13 |
| 2010 | 21% | 14 |
| 2009 | 10% | 10 |
D-5 Mine registró 0.00 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2018.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2018 * | 0.00 | 0.00 | 0.000 |
| 2017 * | 2.91 | 2.91 | 0.000 |
| 2016 * | 2.09 | 2.09 | 0.000 |
| 2015 * | 17.11 | 12.22 | 0.000 |
| 2014 | 7.72 | 1.93 | 0.000 |
| 2013 | 8.01 | 6.86 | 0.000 |
| 2012 | 4.70 | 4.70 | 0.000 |
| 2011 | 13.91 | 13.91 | 0.000 |
- Rex Coal Co. Inc 2008 a 2015
- Hubble Mining Company, LLC. 2015 a 2018
- Rex Coal Company, Inc. 2018 al presente
ⓘ
La producción de carbón se reporta trimestralmente y va con retraso respecto al periodo actual; los trimestres más recientes pueden estar incompletos.| Año | Empleados | Carbón producido (toneladas) |
|---|---|---|
| 2020 | 4 | |
| 2019 | 2 | |
| 2018 | 14 | 41,307 |
| 2017 | 31 | 106,752 |
| 2016 | 37 | 127,239 |
| 2015 | 41 | 122,509 |
| 2014 | 41 | 184,864 |
| 2013 | 64 | 289,133 |
| 2012 | 82 | 322,789 |
| 2011 | 49 | 245,923 |
| 2010 | 35 | 165,141 |
| 2009 | 19 | 46,354 |
| 2008 | 4 |
D-5 Mine se ubica en Harlan County, Kentucky, donde la categoría minera del Censo representa el 4.3% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2020 Q1 | 956 | 0 | 0 | 0.0 |
| 2019 Q4 | 463 | 1 | 0 | 2159.8 |
| 2019 Q3 | 193 | 2 | 0 | 10362.7 |
| 2019 Q2 | 499 | 0 | 0 | 0.0 |
| 2019 Q1 | 417 | 2 | 0 | 4796.2 |
| 2018 Q4 | 585 | 3 | 1 | 5128.2 |
| 2018 Q3 | 427 | 2 | 0 | 4683.8 |
| 2018 Q2 | 12,718 | 18 | 4 | 1415.3 |
Mostrar 39 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2018 Q1 | 14,443 | 22 | 5 | 1523.2 |
| 2017 Q4 | 15,071 | 19 | 6 | 1260.7 |
| 2017 Q3 | 16,872 | 22 | 3 | 1303.9 |
| 2017 Q2 | 19,145 | 33 | 10 | 1723.7 |
| 2017 Q1 | 17,628 | 23 | 4 | 1304.7 |
| 2016 Q4 | 17,400 | 50 | 14 | 2873.6 |
| 2016 Q3 | 39,944 | 28 | 2 | 701.0 |
| 2016 Q2 | 19,661 | 26 | 6 | 1322.4 |
| 2016 Q1 | 18,627 | 17 | 3 | 912.7 |
| 2015 Q4 | 23,576 | 25 | 4 | 1060.4 |
| 2015 Q3 | 21,002 | 35 | 6 | 1666.5 |
| 2015 Q2 | 15,320 | 12 | 3 | 783.3 |
| 2015 Q1 | 21,945 | 17 | 0 | 774.7 |
| 2014 Q4 | 21,149 | 9 | 3 | 425.6 |
| 2014 Q3 | 20,501 | 10 | 3 | 487.8 |
| 2014 Q2 | 24,073 | 16 | 5 | 664.6 |
| 2014 Q1 | 37,838 | 37 | 6 | 977.9 |
| 2013 Q4 | 44,100 | 18 | 4 | 408.2 |
| 2013 Q3 | 38,972 | 22 | 12 | 564.5 |
| 2013 Q2 | 45,839 | 22 | 2 | 479.9 |
| 2013 Q1 | 45,955 | 25 | 7 | 544.0 |
| 2012 Q4 | 56,998 | 20 | 4 | 350.9 |
| 2012 Q3 | 55,714 | 21 | 4 | 376.9 |
| 2012 Q2 | 54,571 | 23 | 11 | 421.5 |
| 2012 Q1 | 45,575 | 14 | 2 | 307.2 |
| 2011 Q4 | 41,741 | 21 | 3 | 503.1 |
| 2011 Q3 | 36,142 | 11 | 3 | 304.4 |
| 2011 Q2 | 37,812 | 9 | 0 | 238.0 |
| 2011 Q1 | 28,063 | 6 | 0 | 213.8 |
| 2010 Q4 | 29,650 | 6 | 0 | 202.4 |
| 2010 Q3 | 21,836 | 8 | 1 | 366.4 |
| 2010 Q2 | 24,200 | 4 | 0 | 165.3 |
| 2010 Q1 | 24,214 | 12 | 1 | 495.6 |
| 2009 Q4 | 18,881 | 15 | 2 | 794.4 |
| 2009 Q3 | 11,804 | 9 | 2 | 762.5 |
| 2009 Q2 | 13,346 | 4 | 0 | 299.7 |
| 2009 Q1 | 6,050 | 10 | 1 | 1652.9 |
| 2008 Q4 | 812 | 0 | 0 | 0.0 |
| 2008 Q3 | 808 | 0 | 0 | 0.0 |
Incidentes reportables
39 en archivo2017 · 1 incidente
2016 · 2 incidentes
Rock fall brk 5 on #5 travelway.
No one witnessed accident leg was hurting and had some scrapes on face
2015 · 8 incidentes
A rock from the rib hit the pinner operator while rib bolting.
Somewhat of a fault area, sandstone roof inby fall and sandstone roof about 1 break outby fall.
Employee raised up from the kneeled position to get a bar. A hammer was on the bar and fell striking him above the right eye.
Employee was splicing a piece of conveyor belt when his hammer chipped. A piece of metal went into his right hand between his index finger and thumb.
Employee slipped and fell into miner heads while setting bits.
Contract employee strained/pulled back muscles while carrying a planatary to the section power center.
Man door fell on employee's hand while scooping at #3 head drive. Hand was swollen and bruised.
A piece of rock fell from the roof striking/pinning employee on the lower half of his right leg while he was working on the feeder. Resulted in a gash and broken leg.
2014 · 4 incidentes
Employee pulled groin area while picking up belt structure.
Employee dropped a "come-a-long" on his left foot while splicing a belt.
Employee cut his right leg above knee while cutting a piece of belt., knife slipped and made a 2" incision.
Employee was riding mantrip when he was caught between the mine beams and the mantrip. He pulled a muscle in his lower back.
2013 · 7 incidentes
Employee was roof bolting when he caught his left thumb between the mine top and the drill chuck on the roof bolter.
Employee strained and pulled right arm tricep while shoveling belt line.
Employee dropped the continuous miner head motor on his right index finger.
A piece of debris in employees eye. Another miner was hammering and a piece of debris flew in employees eye.
Rib rolled and hit employee. Employee complained of head, neck, and shoulder pain.
Employee strained back while hanging cable.
EMPLOYEE SPRAINED LOWER BACK WHILE HANGING MINER CABLE
2012 · 5 incidentes
Ee was operating the miner when the rib rolled and hit him in the leg. It did not break any bones, but cause compartment syndrome about 12 hours after the accident. After another 12 to 15 hours, the swelling eased. No surgery or other medical treatment required. Should be back to work in a few days.
Ee was working with the drill steel on a roof bolter when he pulled a muscle in his back. He is in physical therapy. Should be back to work in three or four weeks.
Ee was riding the mantrip out at the end of the shift. His foot got caught on a piece of belt and pulled him so hard that he fell from the mantrip and broke his ankle. Surgery will be required and he will be off work for several weeks.
Ee was helping get the miner un-stuck when the rib rolled striking his leg. This caused severe bruising and strain. He will be off for 2 or 3 weeks or so, with physical therapy and anti-blood clotting meds.
Ee twisted his knee while working on a scoop. No real problem at the time of occurrence, but the next morning his knee was swelled badly. Missed 4 days and came back in good shape.
2011 · 11 incidentes
None injury. A pillar fall occurred and water came in later. It was discovered on pre-shift for the night shift.
Ee was bolting the rib. He slipped and fell due to muddy bottom. This fall caused a strain in his back and hip. Was off work for two days and in physical therapy. Came back to work with no bad effects.
A brattice fell and hit the miner. It actually hurt his back, knee and thumb. Everything but the thumb got ok. The thumb had to have minor surgery. He missed two days for surgery and recoup and returned with no problems.
Ee was cutting a piece of belt. His knife slipped and cut his hand. It required stitches, but no lasting damage. He took off one day and returned the next shift.
Ee is a repairman. He was preparing a piece of equipment to work on it. He was replacing the cable. When he threw it over the equipment to the side he pulled his back. The doctor is doing tests. Too soon to say how long he will be off.
A piece of draw rock fell from top and hit Ee on foot and ankle. Went to doctor to get checked out. Nothing broken, just strains. Ee went back to work after one day off
Ee was loading belt on 7-15-11 when he developed pain in his left shoulder. He worked several more shifts before going to the doctor. His first day off work was 8-5-11. The doctor found that he had a tear in his rotator cuff. Surgery is required and Ee will be off work for several weeks.
Ee was bolting. A piece of drill steel got loose and hit him in the mouth, knocking out three teeth. Other than needing a partial denture, Ee is in good shape. The dentist allowed him one day off.
When Ee removed check plug from the miner head, oil flew out into his face. Oil and metal shavings got into his eye. Missed three days work, but his eye is not going to have any damage.
Ee was walking toward face from the mantrip when he fell and hurt his knee. The doctors are saying that surgery is needed due to torn ligaments. Ee will be off work for a few weeks.
A rock came dislodged and hit EE in the leg. The doctor took x-rays and found no problems. EE only missed one day and is having no further problems.
2010 · 1 incidente
While drilling a hole for a roof bolt, the drill steel hit EE in mouth. This cut his lip and chipped his teeth. Stitches fixed his lip and a dentist took care of his teeth. Missed one day of work. Back to full duty with no problems.