Dodge City Pit Metal/Non-Metal

GRINDING A PIPE AND THE GRINDER CAUGHT AND JUMPED UP AND HIT HIS CHEEK. THERE WAS A 2" CUT IN THE RIGHT CHEEK THAT REQUIRED STITCHES.

EMPLOYEE WAS CHECKING THE PUMP WHEN A ROCK CAME OUT OF THE RUBBER JOINT AND STRUCK HIM IN THE TOOTH.

EE WAS CHANGING SCREENS ON THE ROCK SHAKER, HE WALKED AROUND TO THE BACKSIDE OF THE MACHINE, TOOK A STEP, AND HIS ANKLE GAVE OUT AND HE FELL TO THE GROUND.

EE WAS WORKING ON CRUSHER/RECYCLER. WHILE USING A PRY BAR TO MOVE A LARGE PIECE OF CONCRETE, HE FELT THE MUSCLES IN HIS ARM AND SHOULDER MOVE OVER.

EE WAS TAKING TRASH TO THE TRASH CAN. AFTER REPLACING THE IRON GRATE THAT KEEPS THE GARBAGE FROM BLOWING, HE HEARD THE PHONE RING. AS HE TURNED TO GO TO THE OFFICE, HIS HAND HIT THE CORNER OF THE GRATE AND CUT HIS RIGHT INDEX FINGER.

THE WIND WAS BLOWING. AS THE EE WAS GETTING INTO THE WELDING TRUCK, SOMETHING BLEW INTO HIS EYE.

THE EE WAS MOUNTING SPRINGS ON DUMP TRUCK WHEN HE PULLED A MUSCLE IN HIS CHEST.

HE WAS WORKING UNDER THE TRUCK AND SOMETHING FELL OFF THE TRUCK AND GOT IN HIS EYE.

BURNED LEFT ARM WHILE WELDING.

DROPPED TAIL GATE ON HAND CAUSING A CUT TO THE FINGER NEXT TO THUMB ON RIGHT HAND.

REPEATED USE OF WRIST FROM RUNNING HYDRALIC LIFTS. EE HAS TO HAVE CARPAL TUNNEL SURGERY ON BOTH WRISTS.

BOTH WRISTS HE HAD CARPAL TUNNEL ON, JULY 1996. REPEATED USE OF WRIST FROM USING HYDRALIC LIFTS.

THE WORKER WAS WORKING ON A PART IN THE SHOP WHEN HE DROPPED THE PART. HE TRIED TO CATCH IT BUT IT LANDED ON HIS WRIST INSTEAD WHICH WAS BADLY BRUISED.

WORKER WAS SLIDING PLASTIC PIPE WHEN HE SLIPPED AND HURT HIS WRISTS. THE DR FINALLY DECIDED THE WORKE HAD BUILD UP ON HIS TENDONS AND HAD TO HAVE HIS TENDONS SCRAPED. SINCE THAT IS THE CASE WE REALLY DO NOT KNOW THE CAUSE OF THE BUILD UP, IT COULD EVEN BE SOMETHING THAT HE DID AT HOME, BUT THE CASE WAS TURNED INTO WORKMANS COMP BEFORE WE KNEW THE REAL PROBLEM.

WORKER WAS TAKING THE CLEAN-OUT OFF OF THE PUMP WHEN HE TWISTED HIS BACK

WORKER WAS WELDING ON FLOAT, PULLED SELF UP AND ARM POPPED.

WORKERS WERE WORKING TO GET ICE OFF OF POND SURFACE.

REPAIRING DOZER IN SHOP FELT PAIN IN BACK

AT APPROX 10:00AM ON MARCH 1 1991 WORKER CAME TO OFFICE COMPLAINING OF PAIN & SWOLLEN RT FOREARM HE WAS SENT TO DODGE CITY MEDICAL CENTER FOR DIAGNOSIS & TREATMENT OWNER LEARNED ON MARCH 13 TH IS MIGHT BE TURNED IN TO WORKERS COMPENSATION NOANSWER YET WHETHER WORKERS COMPENSATION WILL ALOW THIS CLAIM

WORKER WAS USING A CUTTING TORCH TO REMOVE A NUT FROM A BOLT ON OUR KOLBERG MACHINE.

WORKER WAS USING CUTTING TORCH AND WEARING SAFETY GOGGLES WHEN A PIECE OF HOT SAND POPPED OFF AND WENT AROUND THE GOGGLES INTO THE EYE.

WORKER WAS POUNDING ON DOZER TRACK & DISLODGED PIECE OF METAL.

WORKER WAS GUIDING 8" PIPE BEING HOISTED INTO PLACE. THE CHAIN HOOKED TO THE PIPE SLIPPED AND RAMMED THE WORKER'S HAND INTO SAND SCREW.

FIVE MEN WERE WORKING IN SHOP. ONE WAS USING GRINDER REPAIRING SAND AUGER.

WORKER WAS WELD3NG.

WORKER WAS LIFT3NG A 10 LB PAN O SAND FOR TESTING

WORKER STEPPED 2N A BOARD THAT HAD A NAIL IN IT.

WORKER WAS USIN1 A CUTTING TORCH AND THE WIND BLEW A PIECE OF METAL INTO THE EYE.

WORKER WAS GRINDING ON A PIECE OF METAL. HE DIDN HAVE GOGGLES ON. EVIDENTLY A PIECE OF METAL GOT INTO HSI EYE SOMEHOW.

WASHING OUT FROM UNDER SHAKER.AS HE WAS COMING OUT FROM UNDER SHAKER HIS WET SHOE SLIPPED FROM WWET PIPE AND HIS HAND HIT SOME PROJECTILE CAUSING A GASH.

WORKER WAS WORKING UNDER SAND SCREW AND WHEN HE GOT OUT FROM UNDER THE SCREW HE HIT HIS HEAD ON A PROTRUDING VALVE THEN FELL BACKWARD STRIKING HIS HEAD AGAIN