Employee was climbing down the ladder of the 777C rock truck and as he approached the last step, it swung under the bottom of the truck resulting in the employee falling to the ground landing on his right side.
Eagan/King Mountain Surface Mine Coal
Eagan/King Mountain Surface Mine tiene $94K en multas propuestas de MSHA y $0 pendientes en 8 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Eagan/King Mountain Surface Mine.
- Muertes
- 0
- Incidentes totales
- 14
- Años en registro
- 2003–2008
- Último incidente
- Oct 2008
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Eagan/King Mountain Surface Mine tiene $94K en multas propuestas de MSHA y $0 pendientes en 8 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en Eagan/King Mountain Surface Mine muestra un polvo respirable de carbon promedio de 0.20 mg/m3 (100% en cumplimiento) en 140 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2009 Q3 | 0 | 0 | 0 | |
| 2009 Q2 | 14,602 | 0 | 0 | 0.0 |
| 2009 Q1 | 24,576 | 4 | 2 | 162.8 |
| 2008 Q4 | 26,790 | 0 | 0 | 0.0 |
| 2008 Q3 | 22,649 | 3 | 3 | 132.5 |
| 2008 Q2 | 40,859 | 18 | 11 | 440.5 |
| 2008 Q1 | 47,039 | 0 | 0 | 0.0 |
| 2007 Q4 | 36,461 | 14 | 6 | 384.0 |
Mostrar 20 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2007 Q3 | 31,924 | 28 | 17 | 877.1 |
| 2007 Q2 | 25,419 | 0 | 0 | 0.0 |
| 2007 Q1 | 12,291 | 0 | 0 | 0.0 |
| 2006 Q4 | 10,818 | 1 | 0 | 92.4 |
| 2006 Q3 | 10,399 | 0 | 0 | 0.0 |
| 2006 Q2 | 17,159 | 0 | 0 | 0.0 |
| 2006 Q1 | 12,012 | 0 | 0 | 0.0 |
| 2005 Q4 | 23,028 | 3 | 0 | 130.3 |
| 2005 Q3 | 11,881 | 4 | 0 | 336.7 |
| 2005 Q2 | 9,845 | 0 | 0 | 0.0 |
| 2005 Q1 | 5,488 | 3 | 0 | 546.6 |
| 2004 Q4 | 9,345 | 0 | 0 | 0.0 |
| 2004 Q3 | 9,197 | 1 | 0 | 108.7 |
| 2004 Q2 | 16,584 | 0 | 0 | 0.0 |
| 2004 Q1 | 13,480 | 2 | 0 | 148.4 |
| 2003 Q4 | 11,749 | 0 | 0 | 0.0 |
| 2003 Q3 | 9,823 | 5 | 0 | 509.0 |
| 2003 Q2 | 10,675 | 0 | 0 | 0.0 |
| 2003 Q1 | 5,084 | 2 | 0 | 393.4 |
| 2002 Q4 | 0 | 0 | 0 |
Incidentes reportables
14 en archivo2008 · 5 incidentes
Employee was tighting roller bolt on D11R dozer, Employee was lying on his back while tighting bolt and socket spun off head of bolt causing metal shavings to fly in employee eye, Employee did have safety glasses on
Employee was taking out top pin of 992C Loader boom, (Boom Pin) while pushing up on the pin employee felt sharp pain in his lower left side below his rib cage, causing him to pull a muscle.
While climbing up ladder employees left foot slipped off first step of ladder
Employee was climbing down the ladder and slipped on the bottom step. Caught himself on the handrail resulting in hurting his back.
2007 · 3 incidentes
Employee was tamping dirt in drill hole of a rock approx. 4 ft in height, as He was tamping he twisted his back, causing him to pull a muscle in his back.
Employee was welding in the back of a 777C bed, with his helmet & clear safety glasses on and wind blew metal shavings in his eye from behind him.
Employee was on unlevel ground and stepped in a pot hole, causing employee to twist his ankle.
2006 · 2 incidentes
Dry weather, dry conditions. Employee was servicing loader. While climbing down ladder, his foot slipped off step causing a mild sprain to his right ankle.
Wet weather, muddy conditions; employee was checking oil on the loader he operators. As he started to descend he slipped on wet material and caught himself by the grab iron.
2004 · 2 incidentes
EMPLOYEE WAS HAMMERING PINS INTO TEETH THAT WENT ON LOADER BUCKET. A PIECE OF METAL PIN WENT INTO HIS LEFT THIGH.
WAS KNOCKING PIN OUT THAT WENT TO ROLLER FRAME ON DOZER.
2003 · 2 incidentes
HURT BACK WHILE OPERATING DOZER RESULTING IN BACK PAIN BETWEEN NECK AND SHOULDER BLADES.
WAS STEPPING UP ON DOZER, FOOT SLIPPED OFF OF PUSH ARM ON DOZER, RESULTING WITH TWISTED LEFT KNEE.
The full compliance file on Eagan/King Mountain Surface Mine
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.