Foley Quarry tiene $27K en multas propuestas de MSHA y $0 pendientes en 5 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Avísenme cuando se presente un nuevo incidente de la MSHA en Foley Quarry.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 3,850 | 0 | 0 | 0.0 |
| 2025 Q3 | 3,625 | 0 | 0 | 0.0 |
| 2025 Q2 | 3,258 | 2 | 0 | 613.9 |
| 2025 Q1 | 2,464 | 1 | 1 | 405.8 |
| 2024 Q4 | 3,280 | 0 | 0 | 0.0 |
| 2024 Q3 | 4,821 | 4 | 0 | 829.7 |
| 2024 Q2 | 4,349 | 0 | 0 | 0.0 |
| 2024 Q1 | 2,767 | 2 | 0 | 722.8 |
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2023 Q4 | 3,875 | 0 | 0 | 0.0 |
| 2023 Q3 | 4,821 | 0 | 0 | 0.0 |
| 2023 Q2 | 3,381 | 3 | 2 | 887.3 |
| 2023 Q1 | 4,309 | 0 | 0 | 0.0 |
| 2022 Q4 | 3,568 | 6 | 1 | 1681.6 |
| 2022 Q3 | 2,728 | 0 | 0 | 0.0 |
| 2022 Q2 | 4,022 | 1 | 0 | 248.6 |
| 2022 Q1 | 2,740 | 0 | 0 | 0.0 |
| 2021 Q4 | 3,263 | 3 | 0 | 919.4 |
| 2021 Q3 | 3,424 | 1 | 0 | 292.1 |
| 2021 Q2 | 3,277 | 0 | 0 | 0.0 |
| 2021 Q1 | 2,724 | 2 | 1 | 734.2 |
| 2020 Q4 | 3,116 | 0 | 0 | 0.0 |
| 2020 Q3 | 3,895 | 0 | 0 | 0.0 |
| 2020 Q2 | 3,764 | 2 | 0 | 531.3 |
| 2020 Q1 | 2,683 | 0 | 0 | 0.0 |
| 2019 Q4 | 3,133 | 3 | 0 | 957.5 |
| 2019 Q3 | 3,066 | 9 | 0 | 2935.4 |
| 2019 Q2 | 2,642 | 0 | 0 | 0.0 |
| 2019 Q1 | 2,172 | 5 | 1 | 2302.0 |
| 2018 Q4 | 2,973 | 0 | 0 | 0.0 |
| 2018 Q3 | 3,118 | 0 | 0 | 0.0 |
| 2018 Q2 | 3,385 | 2 | 1 | 590.8 |
| 2018 Q1 | 2,273 | 0 | 0 | 0.0 |
| 2017 Q4 | 3,608 | 1 | 0 | 277.2 |
| 2017 Q3 | 3,127 | 0 | 0 | 0.0 |
| 2017 Q2 | 3,968 | 2 | 0 | 504.0 |
| 2017 Q1 | 3,286 | 2 | 0 | 608.6 |
| 2016 Q4 | 4,002 | 0 | 0 | 0.0 |
| 2016 Q3 | 2,063 | 1 | 0 | 484.7 |
| 2016 Q2 | 2,002 | 0 | 0 | 0.0 |
| 2016 Q1 | 2,685 | 2 | 0 | 744.9 |
| 2015 Q4 | 2,933 | 0 | 0 | 0.0 |
| 2015 Q3 | 2,471 | 3 | 0 | 1214.1 |
| 2015 Q2 | 2,293 | 0 | 0 | 0.0 |
| 2015 Q1 | 2,455 | 2 | 0 | 814.7 |
| 2014 Q4 | 2,551 | 0 | 0 | 0.0 |
| 2014 Q3 | 2,964 | 0 | 0 | 0.0 |
| 2014 Q2 | 3,774 | 1 | 0 | 265.0 |
| 2014 Q1 | 1,666 | 2 | 1 | 1200.5 |
| 2013 Q4 | 2,902 | 0 | 0 | 0.0 |
| 2013 Q3 | 2,402 | 0 | 0 | 0.0 |
| 2013 Q2 | 1,595 | 4 | 1 | 2507.8 |
| 2013 Q1 | 1,598 | 2 | 0 | 1251.6 |
| 2012 Q4 | 1,698 | 0 | 0 | 0.0 |
| 2012 Q3 | 2,216 | 0 | 0 | 0.0 |
| 2012 Q2 | 3,182 | 3 | 1 | 942.8 |
| 2012 Q1 | 1,255 | 0 | 0 | 0.0 |
| 2011 Q4 | 1,688 | 2 | 0 | 1184.8 |
| 2011 Q3 | 621 | 0 | 0 | 0.0 |
| 2011 Q2 | 1,783 | 2 | 1 | 1121.7 |
| 2011 Q1 | 1,724 | 0 | 0 | 0.0 |
| 2010 Q4 | 2,089 | 1 | 0 | 478.7 |
| 2010 Q3 | 981 | 0 | 0 | 0.0 |
| 2010 Q2 | 1,894 | 5 | 2 | 2639.9 |
| 2010 Q1 | 1,153 | 0 | 0 | 0.0 |
| 2009 Q4 | 3,226 | 0 | 0 | 0.0 |
| 2009 Q3 | 4,480 | 2 | 0 | 446.4 |
| 2009 Q2 | 2,821 | 0 | 0 | 0.0 |
| 2009 Q1 | 647 | 0 | 0 | 0.0 |
| 2008 Q4 | 3,731 | 8 | 3 | 2144.2 |
| 2008 Q3 | 3,748 | 2 | 0 | 533.6 |
| 2008 Q2 | 3,111 | 0 | 0 | 0.0 |
| 2008 Q1 | 3,203 | 1 | 1 | 312.2 |
| 2007 Q4 | 2,107 | 0 | 0 | 0.0 |
| 2007 Q3 | 2,491 | 1 | 0 | 401.4 |
| 2007 Q2 | 2,273 | 0 | 0 | 0.0 |
| 2007 Q1 | 1,685 | 0 | 0 | 0.0 |
| 2006 Q4 | 2,574 | 2 | 0 | 777.0 |
| 2006 Q3 | 2,742 | 0 | 0 | 0.0 |
| 2006 Q2 | 2,806 | 3 | 0 | 1069.1 |
| 2006 Q1 | 2,573 | 0 | 0 | 0.0 |
| 2005 Q4 | 4,806 | 1 | 0 | 208.1 |
| 2005 Q3 | 1,210 | 0 | 0 | 0.0 |
| 2005 Q2 | 1,038 | 3 | 0 | 2890.2 |
| 2005 Q1 | 1,861 | 0 | 0 | 0.0 |
| 2004 Q4 | 3,799 | 0 | 0 | 0.0 |
| 2004 Q3 | 4,108 | 0 | 0 | 0.0 |
| 2004 Q2 | 3,434 | 0 | 0 | 0.0 |
| 2004 Q1 | 3,541 | 4 | 2 | 1129.6 |
| 2003 Q4 | 2,984 | 0 | 0 | 0.0 |
| 2003 Q3 | 3,484 | 0 | 0 | 0.0 |
| 2003 Q2 | 2,924 | 0 | 0 | 0.0 |
| 2003 Q1 | 2,694 | 0 | 0 | 0.0 |
| 2002 Q4 | 2,376 | 0 | 0 | 0.0 |
| 2002 Q3 | 2,609 | 0 | 0 | 0.0 |
| 2002 Q2 | 2,895 | 4 | 2 | 1381.7 |
| 2002 Q1 | 2,547 | 0 | 0 | 0.0 |
| 2001 Q4 | 2,376 | 0 | 0 | 0.0 |
| 2001 Q3 | 1,474 | 0 | 0 | 0.0 |
| 2001 Q2 | 3,467 | 0 | 0 | 0.0 |
| 2001 Q1 | 3,592 | 0 | 0 | 0.0 |
| 2000 Q4 | 1,792 | 0 | 0 | 0.0 |
| 2000 Q3 | 2,461 | 0 | 0 | 0.0 |
| 2000 Q2 | 2,158 | 9 | 2 | 4170.5 |
| 2000 Q1 | 3,743 | 0 | 0 | 0.0 |
Wrenching on a hose for a track hoe with large wrench with arm in extended raised position
Injured employee was coming down stairs and slipped with muddy boots. When they fell their back struck the step.
A decrease in hearing of an average of 25dB in comparison to the original baseline.
EE reports that when entering the front end loader he struck his right shoulder against the side of the doorway.
While driving a bushing onto the boom cylinder of a 988B loader, a metal chip came off and lodged into the right arm of the employee.
Employee was holding an open end wrench on the head of a bolt holding the motor on the roll mill while another employee was tightening the nut with socket. The wrench slipped off the bolt and mashed employee's middle finger on his right hand between the wrench and frame of motor. Required 6 stitches.
Loader operator was working a stockpile when a customer drove back into the quarry in his pickup. Customer pulled in behind the loader and the operator did not see him. The loader operator backed away from the pile and into the pickup pushing it 1 foot. Customer was geting out of pickup and fell to the ground on his elbow.
Employee was cutting a conveyor belt with a utility knife when the knife slipped and he cut his right thigh.
EMPLOYEE WAS DRILLING HOLES IN ROCK WALL. AS HE WAS SHAKING THE STEEL TO LOOSEN THE LOWER COUPLING THE UPPER COUPLING SHOOK LOOSE AND FELL ABOUT 8 FT ONTO HIS HAR HAT. WE HAD HIM TAKEN TO THE HOSPITAL WHERE HE WAS EXAMINED AND RELEASED SEVERAL HOURS LATER. HE DOES STILL HAVE A HEADACHE SO TOTAL INJURY IS NOT YET KNOWN.
Loader man arrived early and started his loader so it would be warm by the time his shift started. As he was backing out of the loader cab to dismount he missed the ladder and fell off the loader. He fell about 10 feet to the ground and landed on his back. He sprained his upper back and bumped his head on impact. Doctor has advised him to stay home for a few days.
LOADER OPERATOR WAS GETTING UP ON LOADER TO OPERATE IT AND HE SLIPPED ON THE LADDER AND FELL TO THE GROUND.
WHILE ATTEMPTING TO ROLL A 300 LB ROCK, THE EE LOST GRIP AND ROCK ROLLED ONTO FOOT CAUSING FOOT TO TWIST AND BREAK TOE.
WORKER WAS DRILLING SHOT HOLES WHEN A SLIVER OF METAL CAME OFF THE DRILL STEEL AND WENT INTO HIS UPPER ARM.
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.