Wrenching on a hose for a track hoe with large wrench with arm in extended raised position
Foley Quarry: 124 MSHA citations Metal/Non-Metal
Foley Quarry has $27K in proposed MSHA penalties and $151 outstanding across 5 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Foley Quarry.
- Fatalities
- 0
- Total incidents
- 13
- Years on record
- 1997–2019
- Latest incident
- Oct 2019
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Foley Quarry has $27K in proposed MSHA penalties and $151 outstanding across 5 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 13 · 76%
- Stood as issued 2 · 12%
- Vacated or withdrawn 2 · 12%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| CENT 2010-1022M | Settlement | Lesnick | 2011 | $7K → $3K |
| CENT 2009-312M | Settlement | Lesnick | 2009 | $2K → $2K |
| CENT 2020-0191 | Settlement | Miller | 2020 | $2K → $581 |
| CENT 2020-0015 | Settlement | Manning | 2020 | $2K → $1K |
| CENT 2021-0149 | Default | 2021 | $2K → $2K |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2024-08-21
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Quartz, respirable, >1% Qtz17
- Nuisance dust, respirable, <1% Qtz10
- Respirable dust, <.1mg4
- Nuisance dust, total, <1% Qtz3
Show the individual readings (34)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2024-08-21 | Quartz, respirable, >1% Qtz | 0.23 | Front-end Loader Operator | ||
| 2024-08-21 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2023-06-28 | Nuisance dust, respirable, <1% Qtz | 0.19 | 10 | 0.02 | Front-end Loader Operator |
| 2023-06-28 | Quartz, respirable, >1% Qtz | 0.72 | 2.5 | 0.29 | Truck Driver |
| 2023-06-28 | Quartz, respirable, >1% Qtz | 0.2 | Crusher Oper/Worker | ||
| 2019-02-27 | Nuisance dust, total, <1% Qtz | 5.87 | 10 | 0.59 | Mechanic |
| 2019-02-27 | Nuisance dust, total, <1% Qtz | 0.13 | 10 | 0.01 | Backhoe Operator |
| 2019-02-27 | Nuisance dust, total, <1% Qtz | 2.08 | 10 | 0.21 | Utility Man |
| 2017-06-01 | Quartz, respirable, >1% Qtz | 0.54 | 2.34 | 0.23 | Truck Driver |
| 2017-06-01 | Nuisance dust, respirable, <1% Qtz | 1.02 | 10 | 0.10 | Laborer, Bullgang |
| 2017-06-01 | Quartz, respirable, >1% Qtz | 0.63 | 2.32 | 0.27 | Crusher Oper/Worker |
| 2017-06-01 | Quartz, respirable, >1% Qtz | 1.8 | 2.56 | 0.70 | Front-end Loader Operator |
| 2016-09-14 | Quartz, respirable, >1% Qtz | 0.61 | 2.51 | 0.24 | Front-end Loader Operator |
| 2016-09-14 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2016-09-14 | Nuisance dust, respirable, <1% Qtz | 0.77 | 10 | 0.08 | Crusher Oper/Worker |
| 2016-09-14 | Nuisance dust, respirable, <1% Qtz | 0.35 | 10 | 0.04 | Truck Driver |
| 2014-01-15 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2014-01-15 | Nuisance dust, respirable, <1% Qtz | 0.66 | 10 | 0.07 | Crusher Oper/Worker |
| 2014-01-15 | Nuisance dust, respirable, <1% Qtz | 0.12 | 10 | 0.01 | Front-end Loader Operator |
| 2010-04-20 | Nuisance dust, respirable, <1% Qtz | 0.51 | 10 | 0.05 | Crusher Oper/Worker |
| 2010-04-20 | Quartz, respirable, >1% Qtz | 0.49 | 1.39 | 0.35 | Front-end Loader Operator |
| 2010-04-20 | Quartz, respirable, >1% Qtz | 0.12 | 1.43 | 0.08 | Complete Load-Haul-Dump |
| 2010-04-20 | Quartz, respirable, >1% Qtz | 0.68 | 1.99 | 0.34 | Supervisor, Co. Official |
| 2008-01-09 | Quartz, respirable, >1% Qtz | 0.31 | 1.57 | 0.20 | Crusher Oper/Worker |
| 2008-01-09 | Quartz, respirable, >1% Qtz | 0.35 | 1.34 | 0.26 | Truck Driver |
| 2008-01-09 | Nuisance dust, respirable, <1% Qtz | 0.13 | 10 | 0.01 | Front-end Loader Operator |
| 2006-10-04 | Nuisance dust, respirable, <1% Qtz | 0.25 | 10 | 0.03 | Scale Man |
| 2006-10-04 | Quartz, respirable, >1% Qtz | 0.16 | 1.23 | 0.13 | Crusher Oper/Worker |
| 2006-10-04 | Quartz, respirable, >1% Qtz | 0.24 | 1.44 | 0.17 | Front-end Loader Operator |
| 2006-10-04 | Respirable dust, <.1mg | 0 | Complete Load-Haul-Dump | ||
| 2006-10-04 | Nuisance dust, respirable, <1% Qtz | 0.2 | 10 | 0.02 | Supervisor, Co. Official |
| 2005-06-22 | Quartz, respirable, >1% Qtz | 0.75 | 1.35 | 0.56 | Front-end Loader Operator |
| 2005-06-22 | Quartz, respirable, >1% Qtz | 0.19 | 1.76 | 0.11 | Crusher Oper/Worker |
| 2005-06-22 | Quartz, respirable, >1% Qtz | 1.56 | 1.75 | 0.89 | Drill Operator, Rotary Air |
- Magruder Limestone Company Inc 1996 to present
| Year | Employees |
|---|---|
| 2026 | 6 |
| 2025 | 5 |
| 2024 | 6 |
| 2023 | 7 |
| 2022 | 6 |
| 2021 | 5 |
| 2020 | 6 |
| 2019 | 4 |
| 2018 | 5 |
| 2017 | 6 |
| 2016 | 7 |
| 2015 | 6 |
| 2014 | 9 |
| 2013 | 10 |
| 2012 | 12 |
| 2011 | 9 |
| 2010 | 11 |
| 2009 | 13 |
| 2008 | 8 |
| 2007 | 5 |
| 2006 | 5 |
| 2005 | 7 |
| 2004 | 7 |
| 2003 | 5 |
| 2002 | 5 |
| 2001 | 10 |
| 2000 | 11 |
Foley Quarry sits in Lincoln County, Missouri, where the Census mining category is 0.4% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 4,279 | 0 | 0 | 0.0 |
| 2026 Q1 | 3,617 | 2 | 0 | 552.9 |
| 2025 Q4 | 3,850 | 0 | 0 | 0.0 |
| 2025 Q3 | 3,625 | 0 | 0 | 0.0 |
| 2025 Q2 | 3,258 | 2 | 0 | 613.9 |
| 2025 Q1 | 2,464 | 1 | 1 | 405.8 |
| 2024 Q4 | 3,280 | 0 | 0 | 0.0 |
| 2024 Q3 | 4,821 | 4 | 0 | 829.7 |
Show 98 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 4,349 | 0 | 0 | 0.0 |
| 2024 Q1 | 2,767 | 2 | 0 | 722.8 |
| 2023 Q4 | 3,875 | 0 | 0 | 0.0 |
| 2023 Q3 | 4,821 | 0 | 0 | 0.0 |
| 2023 Q2 | 3,381 | 3 | 2 | 887.3 |
| 2023 Q1 | 4,309 | 0 | 0 | 0.0 |
| 2022 Q4 | 3,568 | 6 | 1 | 1681.6 |
| 2022 Q3 | 2,728 | 0 | 0 | 0.0 |
| 2022 Q2 | 4,022 | 1 | 0 | 248.6 |
| 2022 Q1 | 2,740 | 0 | 0 | 0.0 |
| 2021 Q4 | 3,263 | 2 | 0 | 612.9 |
| 2021 Q3 | 3,424 | 1 | 0 | 292.1 |
| 2021 Q2 | 3,277 | 0 | 0 | 0.0 |
| 2021 Q1 | 2,724 | 2 | 1 | 734.2 |
| 2020 Q4 | 3,116 | 0 | 0 | 0.0 |
| 2020 Q3 | 3,895 | 0 | 0 | 0.0 |
| 2020 Q2 | 3,764 | 2 | 0 | 531.3 |
| 2020 Q1 | 2,683 | 0 | 0 | 0.0 |
| 2019 Q4 | 3,133 | 3 | 0 | 957.5 |
| 2019 Q3 | 3,066 | 9 | 0 | 2935.4 |
| 2019 Q2 | 2,642 | 0 | 0 | 0.0 |
| 2019 Q1 | 2,172 | 5 | 1 | 2302.0 |
| 2018 Q4 | 2,973 | 0 | 0 | 0.0 |
| 2018 Q3 | 3,118 | 0 | 0 | 0.0 |
| 2018 Q2 | 3,385 | 2 | 1 | 590.8 |
| 2018 Q1 | 2,273 | 0 | 0 | 0.0 |
| 2017 Q4 | 3,608 | 1 | 0 | 277.2 |
| 2017 Q3 | 3,127 | 0 | 0 | 0.0 |
| 2017 Q2 | 3,968 | 2 | 0 | 504.0 |
| 2017 Q1 | 3,286 | 2 | 0 | 608.6 |
| 2016 Q4 | 4,002 | 0 | 0 | 0.0 |
| 2016 Q3 | 2,063 | 1 | 0 | 484.7 |
| 2016 Q2 | 2,002 | 0 | 0 | 0.0 |
| 2016 Q1 | 2,685 | 2 | 0 | 744.9 |
| 2015 Q4 | 2,933 | 0 | 0 | 0.0 |
| 2015 Q3 | 2,471 | 3 | 0 | 1214.1 |
| 2015 Q2 | 2,293 | 0 | 0 | 0.0 |
| 2015 Q1 | 2,455 | 2 | 0 | 814.7 |
| 2014 Q4 | 2,551 | 0 | 0 | 0.0 |
| 2014 Q3 | 2,964 | 0 | 0 | 0.0 |
| 2014 Q2 | 3,774 | 1 | 0 | 265.0 |
| 2014 Q1 | 1,666 | 2 | 1 | 1200.5 |
| 2013 Q4 | 2,902 | 0 | 0 | 0.0 |
| 2013 Q3 | 2,402 | 0 | 0 | 0.0 |
| 2013 Q2 | 1,595 | 4 | 1 | 2507.8 |
| 2013 Q1 | 1,598 | 2 | 0 | 1251.6 |
| 2012 Q4 | 1,698 | 0 | 0 | 0.0 |
| 2012 Q3 | 2,216 | 0 | 0 | 0.0 |
| 2012 Q2 | 3,182 | 3 | 1 | 942.8 |
| 2012 Q1 | 1,255 | 0 | 0 | 0.0 |
| 2011 Q4 | 1,688 | 2 | 0 | 1184.8 |
| 2011 Q3 | 621 | 0 | 0 | 0.0 |
| 2011 Q2 | 1,783 | 2 | 1 | 1121.7 |
| 2011 Q1 | 1,724 | 0 | 0 | 0.0 |
| 2010 Q4 | 2,089 | 1 | 0 | 478.7 |
| 2010 Q3 | 981 | 0 | 0 | 0.0 |
| 2010 Q2 | 1,894 | 5 | 2 | 2639.9 |
| 2010 Q1 | 1,153 | 0 | 0 | 0.0 |
| 2009 Q4 | 3,226 | 0 | 0 | 0.0 |
| 2009 Q3 | 4,480 | 2 | 0 | 446.4 |
| 2009 Q2 | 2,821 | 0 | 0 | 0.0 |
| 2009 Q1 | 647 | 0 | 0 | 0.0 |
| 2008 Q4 | 3,731 | 8 | 3 | 2144.2 |
| 2008 Q3 | 3,748 | 2 | 0 | 533.6 |
| 2008 Q2 | 3,111 | 0 | 0 | 0.0 |
| 2008 Q1 | 3,203 | 1 | 1 | 312.2 |
| 2007 Q4 | 2,107 | 0 | 0 | 0.0 |
| 2007 Q3 | 2,491 | 1 | 0 | 401.4 |
| 2007 Q2 | 2,273 | 0 | 0 | 0.0 |
| 2007 Q1 | 1,685 | 0 | 0 | 0.0 |
| 2006 Q4 | 2,574 | 2 | 0 | 777.0 |
| 2006 Q3 | 2,742 | 0 | 0 | 0.0 |
| 2006 Q2 | 2,806 | 3 | 0 | 1069.1 |
| 2006 Q1 | 2,573 | 0 | 0 | 0.0 |
| 2005 Q4 | 4,806 | 1 | 0 | 208.1 |
| 2005 Q3 | 1,210 | 0 | 0 | 0.0 |
| 2005 Q2 | 1,038 | 3 | 0 | 2890.2 |
| 2005 Q1 | 1,861 | 0 | 0 | 0.0 |
| 2004 Q4 | 3,799 | 0 | 0 | 0.0 |
| 2004 Q3 | 4,108 | 0 | 0 | 0.0 |
| 2004 Q2 | 3,434 | 0 | 0 | 0.0 |
| 2004 Q1 | 3,541 | 4 | 2 | 1129.6 |
| 2003 Q4 | 2,984 | 0 | 0 | 0.0 |
| 2003 Q3 | 3,484 | 0 | 0 | 0.0 |
| 2003 Q2 | 2,924 | 0 | 0 | 0.0 |
| 2003 Q1 | 2,694 | 0 | 0 | 0.0 |
| 2002 Q4 | 2,376 | 0 | 0 | 0.0 |
| 2002 Q3 | 2,609 | 0 | 0 | 0.0 |
| 2002 Q2 | 2,895 | 4 | 2 | 1381.7 |
| 2002 Q1 | 2,547 | 0 | 0 | 0.0 |
| 2001 Q4 | 2,376 | 0 | 0 | 0.0 |
| 2001 Q3 | 1,474 | 0 | 0 | 0.0 |
| 2001 Q2 | 3,467 | 0 | 0 | 0.0 |
| 2001 Q1 | 3,592 | 0 | 0 | 0.0 |
| 2000 Q4 | 1,792 | 0 | 0 | 0.0 |
| 2000 Q3 | 2,461 | 0 | 0 | 0.0 |
| 2000 Q2 | 2,158 | 9 | 2 | 4170.5 |
| 2000 Q1 | 3,743 | 0 | 0 | 0.0 |
Reportable incidents
13 on file2019 · 2 incidents
Injured employee was coming down stairs and slipped with muddy boots. When they fell their back struck the step.
2015 · 1 incident
A decrease in hearing of an average of 25dB in comparison to the original baseline.
2012 · 1 incident
EE reports that when entering the front end loader he struck his right shoulder against the side of the doorway.
2009 · 3 incidents
While driving a bushing onto the boom cylinder of a 988B loader, a metal chip came off and lodged into the right arm of the employee.
Employee was holding an open end wrench on the head of a bolt holding the motor on the roll mill while another employee was tightening the nut with socket. The wrench slipped off the bolt and mashed employee's middle finger on his right hand between the wrench and frame of motor. Required 6 stitches.
Loader operator was working a stockpile when a customer drove back into the quarry in his pickup. Customer pulled in behind the loader and the operator did not see him. The loader operator backed away from the pile and into the pickup pushing it 1 foot. Customer was geting out of pickup and fell to the ground on his elbow.
2007 · 1 incident
Employee was cutting a conveyor belt with a utility knife when the knife slipped and he cut his right thigh.
2004 · 2 incidents
EMPLOYEE WAS DRILLING HOLES IN ROCK WALL. AS HE WAS SHAKING THE STEEL TO LOOSEN THE LOWER COUPLING THE UPPER COUPLING SHOOK LOOSE AND FELL ABOUT 8 FT ONTO HIS HAR HAT. WE HAD HIM TAKEN TO THE HOSPITAL WHERE HE WAS EXAMINED AND RELEASED SEVERAL HOURS LATER. HE DOES STILL HAVE A HEADACHE SO TOTAL INJURY IS NOT YET KNOWN.
Loader man arrived early and started his loader so it would be warm by the time his shift started. As he was backing out of the loader cab to dismount he missed the ladder and fell off the loader. He fell about 10 feet to the ground and landed on his back. He sprained his upper back and bumped his head on impact. Doctor has advised him to stay home for a few days.
2002 · 1 incident
LOADER OPERATOR WAS GETTING UP ON LOADER TO OPERATE IT AND HE SLIPPED ON THE LADDER AND FELL TO THE GROUND.
2000 · 1 incident
WHILE ATTEMPTING TO ROLL A 300 LB ROCK, THE EE LOST GRIP AND ROCK ROLLED ONTO FOOT CAUSING FOOT TO TWIST AND BREAK TOE.
1997 · 1 incident
WORKER WAS DRILLING SHOT HOLES WHEN A SLIVER OF METAL CAME OFF THE DRILL STEEL AND WENT INTO HIS UPPER ARM.