Fort McDowell Yavapai Materials-Plt1 #1: 225 citaciones de la MSHA Metal/Non-Metal

Operator was loading haul trucks. Mechanic showed up to address an issue on the loader that had occurred. Operator briefly stepped out of loader to talk with mechanic about issue with loader. Using 3-point contact to step off loader, the operators hand slipped causing EE to hurt EE's knee. Operator did not fall off ladder.

Individual was using an extended branch saw to cut branches on a tree. When pulling the cut branches from the tree they came down on top of them causing a small contusion on their head requiring 3 staples and a small contusion to the right arm. Dr. excused them from work for 3 days and employee is returned with no limitations on 7/26/2022

Equipment Operator was shoveling under a screening plant and noticed the next day that their shoulder was sore. After a doctor looked at it, EE was put on light duty. Operator is now driving a water truck and there were no missed work days.

Employee tripped and fell on the front stairs of the office.

The loader operator was traveling across the main yard and struck a pot hole. The impact jarred lower back.

Employee struck a hole while operating a loader. The impact caused the loader seat to bottom out jarring the operator's lower back.

While exiting the crusher 1-02, EE lost his footing and fell on his left side.

Two employees were working on the same screening plant. During the course of making the repairs one employee was exposed to "arc flash" from the other employee's welding activities.

MAINT. CREW WAS REPAIRING A CEDAR RAPIDS CONE CRUSHER. TOP OF CRUSHER HAD BEEN REMOVED EXPOSING A HOLE IN THE WORK DECK, WHERE THE CRUSHER ACCUM. HAD BEEN. THE INJURED PERSON THOUGHT SHE WAS S TEPPING INTO THE SMALL OPEN HOLE & OVER CORRECTED HER POSITION BY REACHING FOR A NEARBY LADDER. A FEW HOURS LATER SHE COMPLAINED OF A BACK PAIN & AT THAT TIME WAS TAKEN TO A MEDICAL FACILITY.

WHEN COMING DOWN LADDER OF THE 988 LO0ADER, EE FELT A PULLING SENSATION IN HIS LEFT SHOULDER.

EMPLOYEE WAS LEAVING EAST ENTRY AND TRIPPED ON ROLLED CARPET.

EMPLOYEE WAS REAR-ENDED ON BEELINE HWY @ ENTRANCE AREA OF HAULING ROAD.

EMPLOYEE WAS CHANGING SCREEN AND DID NOT TIME RELASE OF HIS SIDE. WAS STRUCK ON LOWER RIGHT ARM BY SCREEN.

REMOVING SCREEN EMPLOYEE HAD LIFTED ONE SIDE OF SCREEN AND DID NOT RELEASE ON TIME, WIRE CAUGHT HIS SHIRT, TWISTING RIGHT ELBOW.

EMPLOYEE CLAIMS HE FELT SHARP PAIN IN LOWR BACK WHILE SHOVELING.

SHOVELING DIRT IN EQUIPMENT TUNNEL, HIT HEAD ON CONVEYER STEEL.

EMPLOYEE WAS INSTALLING ROLLERS IN S-CAM TYPE BRAKE SYSTEM. THE PRYBAR SLIPPED, CATCHING EMPLOYEE'S FINGER BETWEEN THE BRAKE SHOE AND S-CAM.

EE WAS REBUILDING INTERIOR WEAR PLATES ON LOADER BUCKET. EE WAS GRINDING AND A WELDER WAS WELDING NEXT TO HIM. EE RECEIVED FLASH BURNS TO BOTH EYES.

EE WAS INSPECTING SLOBBER AND WORKING ON CONVEYOR BELT WHEN GLOVE GOT CAUGHT PULLING HAND INTO ROLLER AREA CRUSHING HAND.

EE WAS WALKING PAST A SHEET OF CUT STEEL, THAT WAS RESTING ON THE FORKS OF THE FORK LIFT. EE STRUCK HIS SHIN ON THE SHARP CORNER OF THE STEEL PLATE.

EMPLOYEE WAS HELPING REMOVE A SCREEN FROM A SCREENING PLANT.THE SCREEN SLIPPED- CUTTINGTHE EMPLOYEE'S LEFT HAND.

THE ROUGH RIDE OF THE 613 WATER PULL WAS MORE THAN THE EMPLOYEE COULD TOLERATE ON HIS BACH AND HIP.

EE WAS LIFTING A HEAVY ROLL OF SLOBBER RUBBER WHEN HE FELT A SMALL PULL IN HIS BACK.

EE WAS USING A TORCH AND MOVED HIS ARM IN FRONT OF FLAME.

TIGHTENING CHEEK PLATE BOLT WHEN INSIDE OF RACHET BROKE CAUSING RT ELBOW TO STRIKE GUARD RAIL.

CUTTING ON A RUBBER SLOBBER, HIS KNIFE SLIPPED CUTTING INTO HIS LEFT THUMB.

GETTING OUT OF LUBE TRUCK, SLIPPED ON STEP AND FELL.

CLEANING MATERIAL FROM FEEDER(IN A TUNNEL AREA) WEIGHT ARM ASSEMBLY WAS HUNG UP WITH MATERIAL.AFTER MOVING MATERIAL WEIGHT ARM ASSEMBLY DROP BACK INTO LOWER POSITION WHICH STRUCK HIS RIGHT SHOULDER.

REPAIRING LOADER BUCKETS TYRING TO MOVE A PLATE OF STEEL INTO PLACE FOR WELDING.

WHILE MOVING MATERIAL WITH LOADER,HIT BUMP IN THE ROAD WHICH CAUSED THE LOADER TO BOUNCE FROM SIDE TO SIDE,CAUSING RIGHT SHOULDER TO BE JAMMED.

WHILE CROSSING THE YARD IN A LOADER THE OPERATOR RAN OVER A PILE OF MATERIAL,THE IMPACT BOTTOMED OUT THE OPERATORS SEAT,JARRING THE OPERATOR.