Miner stepped out of operator's station of Cat 14H blade to close open engine bay door. In doing so miner stepped onto rear tire that was covered in mud, slipping & falling to the ground. This resulted in spraining left wrist. Miner had MRI completed on 3/10/24 & results were provided to SRMG safety on 3/12/24 stating there was in fact a fracture in the wrist. No other issues.
Glendale Plant Metal/Non-Metal
Glendale Plant tiene $4K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Glendale Plant.
- Muertes
- 0
- Incidentes totales
- 11
- Años en registro
- 2018–2024
- Último incidente
- Feb 2024
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Glendale Plant tiene $4K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 9,709 | 0 | 0 | 0.0 |
| 2025 Q3 | 10,857 | 0 | 0 | 0.0 |
| 2025 Q2 | 11,453 | 0 | 0 | 0.0 |
| 2025 Q1 | 10,248 | 1 | 0 | 97.6 |
| 2024 Q4 | 10,508 | 0 | 0 | 0.0 |
| 2024 Q3 | 10,395 | 3 | 0 | 288.6 |
| 2024 Q2 | 14,029 | 0 | 0 | 0.0 |
| 2024 Q1 | 12,111 | 1 | 0 | 82.6 |
Mostrar 39 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2023 Q4 | 11,310 | 0 | 0 | 0.0 |
| 2023 Q3 | 11,983 | 0 | 0 | 0.0 |
| 2023 Q2 | 11,095 | 0 | 0 | 0.0 |
| 2023 Q1 | 10,941 | 0 | 0 | 0.0 |
| 2022 Q4 | 10,112 | 0 | 0 | 0.0 |
| 2022 Q3 | 9,532 | 1 | 0 | 104.9 |
| 2022 Q2 | 11,156 | 0 | 0 | 0.0 |
| 2022 Q1 | 11,219 | 0 | 0 | 0.0 |
| 2021 Q4 | 9,137 | 0 | 0 | 0.0 |
| 2021 Q3 | 9,799 | 0 | 0 | 0.0 |
| 2021 Q2 | 9,977 | 0 | 0 | 0.0 |
| 2021 Q1 | 10,717 | 0 | 0 | 0.0 |
| 2020 Q4 | 9,516 | 0 | 0 | 0.0 |
| 2020 Q3 | 11,627 | 0 | 0 | 0.0 |
| 2020 Q2 | 10,939 | 2 | 0 | 182.8 |
| 2020 Q1 | 11,092 | 0 | 0 | 0.0 |
| 2019 Q4 | 9,705 | 0 | 0 | 0.0 |
| 2019 Q3 | 10,178 | 0 | 0 | 0.0 |
| 2019 Q2 | 12,233 | 0 | 0 | 0.0 |
| 2019 Q1 | 10,004 | 1 | 0 | 100.0 |
| 2018 Q4 | 8,205 | 0 | 0 | 0.0 |
| 2018 Q3 | 9,157 | 2 | 1 | 218.4 |
| 2018 Q2 | 9,482 | 0 | 0 | 0.0 |
| 2018 Q1 | 9,450 | 4 | 0 | 423.3 |
| 2017 Q4 | 7,273 | 0 | 0 | 0.0 |
| 2017 Q3 | 7,655 | 0 | 0 | 0.0 |
| 2017 Q2 | 8,768 | 2 | 0 | 228.1 |
| 2017 Q1 | 6,572 | 0 | 0 | 0.0 |
| 2016 Q4 | 5,532 | 0 | 0 | 0.0 |
| 2016 Q3 | 6,662 | 0 | 0 | 0.0 |
| 2016 Q2 | 8,256 | 0 | 0 | 0.0 |
| 2016 Q1 | 7,494 | 0 | 0 | 0.0 |
| 2015 Q4 | 5,562 | 0 | 0 | 0.0 |
| 2015 Q3 | 4,136 | 0 | 0 | 0.0 |
| 2015 Q2 | 3,751 | 0 | 0 | 0.0 |
| 2015 Q1 | 1,509 | 0 | 0 | 0.0 |
| 2014 Q4 | 1,143 | 1 | 0 | 874.9 |
| 2014 Q3 | 1,095 | 0 | 0 | 0.0 |
| 2014 Q2 | 2,565 | 0 | 0 | 0.0 |
Incidentes reportables
11 en archivo2024 · 1 incidente
2022 · 2 incidentes
Miner was adding engine oil to a 775G haulage truck. As EE was finishing the task, EE closed the engine compartment access hood/door. EE wasn't aware that EE's right thumb was placed on a pinch point area and struck EE's right thumb causing a laceration. EE was treated and received stitches. Miner was given restricted duty.
Miner was climbing the ladder of a 775 haul truck during servicing of equipment. While climbing miner felt a pull in lower left abdomen. Upon medical review miner was given restricted duty for a strain.
2021 · 3 incidentes
Miner was operating a front end loader and sustained a contusion of lower back when the seat of the loader bottomed out when miner hit a bump. Miner was placed on restricted duty upon medical review of the injury.
Miner cut EE's left ring finger while changing segment plates from a John Deere 944K loader bucket requiring 8 stitches. Miner was holding bolt head as EE impacted the nut with the impact wrench spinning the head of the bolt.
Miner was stockpiling material away from the mortar sand stacker belt when the 988K loader EE was using came in contact with the belt. The belt was pulled onto the loader and the head pulley came thru the front windshield of the loader as it fell. Miner injured EE's left foot when the dash of the loader compressed onto EE's foot. Miner had surgery on foot to correct the injury.
2020 · 2 incidentes
While operating a 745 Articulated Haul truck the left front tire blew out. Miner was parked loading next to a wall that redirected tire blast back towards the cab of the haul truck sending broken glass from the windows into the cab resulting in the miner getting cuts and abrasions to left side and right eye. Miner also sustained unknown temp hearing loss in left ear.
Miner was replacing cutting edges on a 980G loader and in the process EE was pulling the center plate from underneath the bucket so it can be picked up with a boom. As the miner released the cutting edge and stood up, EE felt a "pop" in the lower right side of the back. This resulted in a muscle strain in EE's lower back.
2019 · 2 incidentes
Miner was shoveling under a Jaw Crusher when they strained their left wrist and right elbow. Employee was sent for medical evaluation and placed on restricted duty. Miner returned to work and is currently working restricted duty.
Miner was using a box cutter to open the other packaging of some press bags for the wash plant when the cutter slipped and cut EE's right pointer finger. This resulted in the miner receiving medical treatment in the form of a Tetanus shot and stitches. Miner returned to work the next day on restricted duty.
2018 · 1 incidente
Miner struck a finger while using a 3 lb sledge hammer and a hole punch to punch holes in flashing while making repairs to the Fat Pak Crusher. This resulted in a crush injury to the left index finger and restricted duty.
The full compliance file on Glendale Plant
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.