Guadalupe Metal/Non-Metal

The miner was removing a pin from a dozer blade with a hammer and punch. He misjudged the contact point of the punch, therefore, striking the left pinky finger. Impact caused fracture.

EMPLOYEE WAS USING A 4 1/2"GRINDER. GRINDING ON AIR HP200 CONE CRUSHER HEAD. THE GRINDING WHEEL CAME APART SENDING METAL PIECES IN THE AIR. A PIECE OF FOREIGN BODY ENTERED HIS RT. EYE. EE WAS WEARING EYE PROTECTION W/SIDE SHIELDS.

DID NOT DO DAILY SAFETY WALK AROUND. EE WAS WARNED ABOUT NOT DOING HIS SAFETY WALK. BRAKE MALFUNCTIONED SO MACHINE FAILED TO OPERATE PROPERLY.

EE WAS DRIVING A WATER TRK SPRAYING WATER. AS HEDROVE NEXT TO A PARKED TRK AT ABOUT 5-10MPH HE LOOKED IN HIS SIDE MIRROR & DROVE INTO THE PARKEDTRK WITH THE SUDDEN STOP HIS LEFT ELBOW SLAMMED INTO THE WIND WINDOW POST & CUT THE ELBOW

EE WAS EXITING HIS WATER TRUCK, AS HE DID HE LOST HIS BALANCE AND SLIPPED. AS HE LANDED ON A RAISED CONCRETE AREA, HE BENT HIS ANKLE CAUSING IT TO BREAK.

EMPLOYEE STEPPED BACK FROM HIS TRUCK, AS HE DID HE STARTED TO FALL AND IN DOING SO HE TWISTED HIS LEFT KNEE AND FELL.

PUSHING LARGE STEEL FRAME, LACERATION OF LEFT HAND. HE WAS USING GLOVES AT TIME.

ROCK BOUNCED OFF LOADER BUCKET & HIT THE WINDSHIELD & THEN GRAZED DRIVER'S CHEEK - NOTHING BROKEN & DRIVER RETURNED TO WORK FOLLOWING WORK DAY.

EE WAS DRIVING A DOZER IN THE YARD. WHILE DRIVING HIS NECK AND BACK GOT JARRED AND INJURED.

EMPLOYEE WAS HAMMERING A PIECE OF METAL WHEN A SLIVER OF METAL FLEW INTO HIS RT EYE

EE STATES HE INJURED HIS LEFT ARM WHILE OPERATING A FRONT END LOADER.

BACK STRAIN FROM EE DRIVING HIS DUMPTRUCK. HE WAS GETTING LOADED WITH ROCK FROM LOADER OPERATOR. LOADER BUMPED HIS TRUCK AND SHOOK EE.

EE WAS LIFTING AN 80 LB SIGN INTO THE BACK OF A PICK UP TRUCK AND STRAINED HIS LOWER BACK.

EMPLOYEE WAS WALKING TO GETIN HIS EUCLID LOADER AND A PIECE OF DUST FLEW INTO HSI EYE.

EMPLOYEE WAS WORKING ON A GATE HANDLE AT ROCK PLANT CRUSHER. THE GATE HANDLE CAUGHT RIGHT HAND FIFTH FINGER & CAUSED A BLOOD BLISTER.

EMPLOYEE WAS DIGGING OUT A CHUTE ON ROCK PLANT. MUD HIT HIS LEFT ANKLE AND INJURED HIS LEFT ANKLE.

EMPLOYEE WAS AT THE ROCK PLANT.HE STEPPED ON A METAL STEP.THE SGTEP BROKE AND HIS FOOT SLIPPED.EMPLOYEE HAS A HYPEREXTENDED RIGHT FOOT AND ANKLE.

EMPLOYEE WAS USING AN OBJECT CALLED A RIPPERSTOOTH TO UNPLUG THE CRUSHER.AS HE WAS TRYING TO UNPLUG THE CRUSHER,HE TRIED TO LIFT OUT THE RIPPERSTOOTH AND BACKED UP IN A HOLE ON THE DECK WHICH CAUSED HIM TO JERK HIS JACK.

EMPL DRIVING LOADED HAULER DOWN HILL. ROAD WAS SLIPPERY FROM LIGHT RAIN. THE HAULER SLIPPED ON THE ROAD AND WENT OVER BERM AND DOWN 115'EMBANKMENT.

EMPL CUTTING BELT AND THE KNIFE SLIPPED AND CUT RIGHT KNEE.

EMPLOYEE WAS WALKING AND SLIPPED ON SOME STEPS.

EMPLOYEE WAS DRIVING HIS LOADER DOWN A HILL AND LOST CONTROL OF THE LOADER.EMPLOYEE HIT THE STEERING KNOB AND BRUISED HIS RIBS AND LUNGS.

LIFTING CUTTING EDGE STRAINED BACK

EMPLOYEE WAS DRIVING HIS TRUCK AND THE TRUCK LOST ITS STEERING. AGTER LOSING ITS STEERING, THE TRUCK HIT A BERM INJURING THE EMPLOYEE'S NECK AND SHOULDER.

EMPLOYEE DRIVE AND OPERATES THE LOADER IN THE YARD. HE CLAIMS THAT THE BOUNCING AROUND FROM THE LOADER HAD INJURED HIS LOWER BACK.

EMPLOYEE WAS STANDING AT THE FINES PILE TRYING TO UNPLUG A HOLE WHEN THE PILE GAVE WAY AND THE EMPLOYEE SLIPPED AND DISLOCATED HIS FINGER AND SPRAINED HIS WRIST.

EE WAS BUILDING A BERM ON THE SIDE OF THE ROAD. WHILE HE WAS BUILDING THE BERM, HIS LOADER WENT BACKWARDS OFF THE BERM AND EE WAS THROWN FROM THE LOADER.

EMPLOYEE WAS BENDING OVER TO SERVICE AND GREASE THE ELECTRIC MOTOR, AND A WIRE HOOK HANGING FROM A CYCLONE FENCE WHICH ACTS AS A GUARD CAUGHT THE CORNER OF HIS LEFT EYE.

EMPLOYEE WAS CLIMBING ROCK PILE.A 6" ROCK FELL OFF OF #5 BELT FROM ABOVE HITTING EMPLOYEE'S BACK CAUSING HIM TO LOSE BLANCE AND FALL DOWN TWISTING HIS RIGHT KNEE.

WHILE USING A SPECIAL WRENCH TO HOLD BOLTS WHILE HAMMERING, HE MISSED ANDHIT HIS LEFT THUMB.

WHILE OPERATING A 50 TON EUCLID HAUL TRUCK, THE EMPLOYEE CLAIMS HE DROVE THROUGH A CHUCK-HOLE THEREBY INJURING HIS BACK.

EMP. WAS GETTING A SMAPLE OF 3/8" ROCK OF A BET. WHILE HE WAS CARRYING A FULL SMPLE BUCKET HE SLIPPED ON A CAT WALK HE TWISTED HIS LEFT ANKLE.

EMPLOYEE WAS OP9RATING A RUBBER TIRED END LOADER EMPLOYEE BACKED THE END LOADER INTO AN OPEN TRU TRENCH OVERTURNING THE MACHINE

EMPLOYEE WAS CU7TING A SCREEN DOWN WITH A CUTTING TORCH. RUST AND WIND.

EMPLOYEE WAS US3NG SHOVEL TO SHOVEL ROCK AND DIRT FROM UNDER CONVEYOR BELT AND PULLED A MUSCLE IN HIS LEFT SHOULDER.

CHANGING SCREE3 AT ROCK PLANT. HE STEPPED OFF SHAKER SCREEN ON TO PLATFORM AND TWISTED HIS RIGHT KNEE

FUELING PORTABL9 LIGHT SYSTEM WHEN HE STEPPED DOWN OFF OF FUEL TRUCK TWISTED HIS ANKLE AND FELL HITTING THE SIDE OF HIS HEAD ON TRUCK STEP

STEPPED OFF LOA8ER AND TWISTED KNEE

POSSIBLE LONG T9RM BACK IRRITATION DUE TO LOADER OPERATION

SHOVELING GRAVE5 TO BACK FILL DRILL HOLES

I NAME WAS CLIM6ING AROUND INSIDE OF THE BINS ON THE ASPHALT PLANT AND HIT HIS RIGHT KNEE ON A LADDER RUNG.

ROCK FELL OFF O0 CONVEYOR BELT AND HIT I,NAME ON HIS FOOT.

GUIDING SCREENS3INTO PLACE AS CRANE WAS LIFTING. SCREEN FELL AGAINST HAND AND PINNED HIM AGAINST WALL.

EMPL MAKING REPAIRS ON ASPHALT PLANT AND WIND BLEW FOREIGN BODY IN LEFT EYE.

EMPLOYEE WAS WORKING UNDER DIRECTION OF OUTSIDE ELECTRICAL CONTRACTOR WHO WAS DOING REPAIR WORK IN PLANT. THEY WERE PULLING ON ELECTRICAL WIRES AND A GROUND WIRE TOUCHED A LIVE BAR.

EMPLOYEE WAS WORKING ON WELDING TRAILER. HE STEPPED OVER TONGUE OF TRAILER AND TRIPPED. FELL TO GROUND ON HAND AND FOREARM.

EE WAS CLIMBING DOWN THRU A SCREEN FRAME. HE LOST HIS FOOTING & SLIPPED AS HE WAS CLIMBING THRU.