Injured backed 1 ton truck up on a 1 ft high bladed berm on level ground to replace a U-joint. EE put the truck in park, set the brake, and chocked the front wheels. With the drive shaft removed, only the front brake and chocks were left to hold the truck on the berm incline and they slid 2.5 foot forward on the muddy ground causing shoulder bruising by the rear dual wheels.
H & H Coal
H & H tiene $25K en multas propuestas de MSHA y $0 pendientes en 4 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en H & H.
- Muertes
- 0
- Incidentes totales
- 9
- Años en registro
- 2010–2017
- Último incidente
- Jun 2017
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.H & H tiene $25K en multas propuestas de MSHA y $0 pendientes en 4 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en H & H muestra un polvo respirable de carbon promedio de 0.25 mg/m3 (100% en cumplimiento) en 123 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2018 Q3 | 0 | 0 | 0 | |
| 2018 Q2 | 0 | 0 | 0 | |
| 2018 Q1 | 0 | 0 | 0 | |
| 2017 Q4 | 0 | 0 | 0 | |
| 2017 Q3 | 18,706 | 9 | 2 | 481.1 |
| 2017 Q2 | 21,224 | 2 | 1 | 94.2 |
| 2017 Q1 | 22,277 | 9 | 4 | 404.0 |
| 2016 Q4 | 21,769 | 0 | 0 | 0.0 |
Mostrar 29 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2016 Q3 | 25,156 | 1 | 1 | 39.8 |
| 2016 Q2 | 22,698 | 6 | 0 | 264.3 |
| 2016 Q1 | 22,698 | 10 | 2 | 440.6 |
| 2015 Q4 | 24,329 | 0 | 0 | 0.0 |
| 2015 Q3 | 26,070 | 3 | 1 | 115.1 |
| 2015 Q2 | 27,448 | 5 | 2 | 182.2 |
| 2015 Q1 | 25,259 | 5 | 0 | 197.9 |
| 2014 Q4 | 31,129 | 0 | 0 | 0.0 |
| 2014 Q3 | 29,074 | 0 | 0 | 0.0 |
| 2014 Q2 | 29,469 | 9 | 1 | 305.4 |
| 2014 Q1 | 30,406 | 0 | 0 | 0.0 |
| 2013 Q4 | 57,566 | 4 | 1 | 69.5 |
| 2013 Q3 | 31,877 | 13 | 4 | 407.8 |
| 2013 Q2 | 31,472 | 0 | 0 | 0.0 |
| 2013 Q1 | 31,091 | 6 | 3 | 193.0 |
| 2012 Q4 | 29,535 | 0 | 0 | 0.0 |
| 2012 Q3 | 30,190 | 2 | 1 | 66.2 |
| 2012 Q2 | 30,385 | 0 | 0 | 0.0 |
| 2012 Q1 | 29,507 | 10 | 3 | 338.9 |
| 2011 Q4 | 26,750 | 0 | 0 | 0.0 |
| 2011 Q3 | 26,008 | 0 | 0 | 0.0 |
| 2011 Q2 | 26,970 | 5 | 1 | 185.4 |
| 2011 Q1 | 28,572 | 6 | 1 | 210.0 |
| 2010 Q4 | 25,862 | 0 | 0 | 0.0 |
| 2010 Q3 | 32,226 | 3 | 1 | 93.1 |
| 2010 Q2 | 31,650 | 3 | 1 | 94.8 |
| 2010 Q1 | 27,558 | 10 | 6 | 362.9 |
| 2009 Q4 | 10,352 | 0 | 0 | 0.0 |
| 2009 Q3 | 0 | 0 | 0 |
Incidentes reportables
9 en archivo2017 · 1 incidente
2016 · 1 incidente
While helping remove branches stuck in a harrow, EE slipped causing EE to hit one of the spikes with arm causing a laceration that required stitches.
2014 · 1 incidente
While operating a Broce Broom backing up, the injured hit a bump causing the seat to shift on the cushioned seat support pinching his finger. Injury is a broken finger tip from being mashed.
2012 · 4 incidentes
While reaching to turn off a valve on the highwall drill, his hand slipped exhaust pipe causing a burn.
While performing maintenance, the injured's wrench slipped causing him to hit the frame of the disc and lacerated his thumb requiring stitches.
While removing the grill cover on a Cat D11 Dozer, the hinge broke causing the grill to fall onto the injured's hand breaking one finger and lacerating this hand requiring stitches.
While changing out of his rain suit and rubber boots, the injured was putting on his normal work boots when he heard a loud pop and his foot started hurting. He fractured his foot while putting on his boots.
2010 · 2 incidentes
While being loaded, a large rock dumped into the bed of his end dump, rolled into the side of the bed causing the truck to twist from the blow which broke the window popping a glass shard to to fly and scratch his eye, requiring a presription for pain.
While removing a cylinder pin, the injured smashed his finger with a drive pin and hammer causing the need of stitches on the ring finger of his left hand.
The full compliance file on H & H
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.