Honey Branch tiene $35K en multas propuestas de MSHA y $31K pendientes en 1 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Avísenme cuando se presente un nuevo incidente de la MSHA en Honey Branch.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2008 Q4 | 68 | 0 | 0 | 0.0 |
| 2007 Q4 | 240 | 1 | 0 | 4166.7 |
| 2007 Q3 | 1,092 | 0 | 0 | 0.0 |
| 2007 Q2 | 1,227 | 0 | 0 | 0.0 |
| 2007 Q1 | 7,386 | 23 | 13 | 3114.0 |
| 2006 Q4 | 6,823 | 31 | 14 | 4543.5 |
| 2006 Q3 | 4,384 | 19 | 7 | 4333.9 |
| 2006 Q2 | 6,245 | 28 | 14 | 4483.6 |
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2006 Q1 | 5,674 | 35 | 18 | 6168.5 |
| 2005 Q4 | 5,131 | 47 | 17 | 9160.0 |
| 2005 Q3 | 5,129 | 8 | 3 | 1559.8 |
| 2005 Q2 | 4,259 | 18 | 12 | 4226.3 |
| 2005 Q1 | 1,033 | 3 | 2 | 2904.2 |
| 2004 Q4 | 1,824 | 2 | 1 | 1096.5 |
| 2004 Q3 | 1,440 | 2 | 2 | 1388.9 |
| 2004 Q2 | 160 | 0 | 0 | 0.0 |
| 2003 Q3 | 386 | 3 | 0 | 7772.0 |
| 2003 Q2 | 1,133 | 11 | 5 | 9708.7 |
| 2003 Q1 | 745 | 1 | 0 | 1342.3 |
| 2002 Q4 | 1,407 | 1 | 0 | 710.7 |
| 2002 Q3 | 1,306 | 0 | 0 | 0.0 |
| 2002 Q2 | 2,175 | 0 | 0 | 0.0 |
| 2001 Q3 | 10 | 26 | 17 | 2600000.0 |
| 2001 Q2 | 8,845 | 38 | 27 | 4296.2 |
| 2001 Q1 | 4,458 | 18 | 6 | 4037.7 |
| 2000 Q3 | 0 | 0 | 0 | |
| 2000 Q2 | 0 | 0 | 0 | |
| 2000 Q1 | 9,729 | 0 | 0 | 0.0 |
Mining near a fault line, the intersection of #3 Entry fell approximately 10 to 12 feet high. There was no damage to ventilation or equipment on the section. No miners were involved in the fall, so therefore no injuries.
A piece of rock fell from the roof of the mine mashing employee's hand between it and the drill pot of the machine.
EE reported Wednesday 1/3/07 by telephone to mine operator that on monday he had tripped on miner cable and injured his back.
The fall was in the return at 55217. Out by #2 drive in the return.
Employee lifted the cable reel to the TD2-43 roof bolter and strained his back.
A piece of rock fell from the mine roof area striking employee in the left arm.
Laminated top fell on the intake at 55 1649. Size of fall 60' long, 18' wide, 9' thick.
EE was trying to remove a large chunk of coal on the belt line when he felt his back give out.
EE was operating the td2-43 roof bolter when he was struck in the finger with a thin sharp peace of metal.
A rock fall was discovered during the weekly examination of the return area. The fall was 3500 feet from the working section. The fall was at SS 550 approaching the #3 seal. The area will be dangered off and a walkway to the #3 seal will be timbered off for safe access to the #3 seal.
Roof drill operator twisted knee.
Laminated top fell ont he #3 belt line at 551637 Size of fall 20 w 20# 8.
Bolter operator was lowering drill head when steel suddenly came loose and struck him. A piece of rock fell with the steel. Operator was struck.
EMPLOYEE SAID HE WAS WALKING AND LOST HIS FOOTING AND FELL DOWN, HE CAUGHT HIMSELF ON HIS HANDS.THIS HAND HIT A SHARP ROCK AND IT CUT HIS RIGHT HAND.
EE WAS PICKING UP BELT STRUCTURE, WHEN HE FELT PAIN IN LOWER BACK.
GETTING ROCK OUT BETWEEN GATHERING HEAD & FRAME OF MINER WHEN HAND SLIPPED OFF ROCK PINCHING LEFT HAND POINTER FINGER
HAD A ROOF FALL ON INTAKE 2 BRAKES OUT BY SPAD 1658 #2 ENTRY THE FALL CONTINUED FRAME OLD FALL, THE FALL SIZE IS 40 FT LONG, 18 FT WIDE TOP OUT AT 8 FT HIGH. MOVED LIFE LIME AND ESCAPE WAY TWO #1 ENTRY.
ROCK SLID OFF SIDE OF MINER ABOUT 7' HIGH IN INTERSECTION. FROM THE SIDE OF THE MINER IT SLID DOWN THE LEG OF THE INJURED WHO WAS PUTTING OIL INTHE MINER, CUTTING HIS LEG ABOUT 5". ROCK WAS 1' IN DIAMETER, 1/2 TO 1' THICK.
ROCK 18" TRIANGLE 18"X 18", 2" THICK ON ONE END TO 0" OTHER END. FELL ABOUT 3' AND STRUCK IN BACK BETWEEN SHOULDERS CAUSING BRUISE WHILE SHOVELING BELT.
#2 ENTRY AT PORTAL 50' OUTBY 22 157. REMOVED ROCK OFF APRON, REWORKED AND EXTENDED APRON TOWARD INSIDE BRACKED WITH STEEL POST.
ROOF FALL #1 ENTRY 1 XCUT INBY #55 1627. DANGERED AND TIMBERED OFF.
EE WAS TIGHTENING ROOF BOLT WITH WRENCH WHEN ROCK FELL AND HIT HIS LITTLE FINGER ON HIS LEFT HAND.
ROCK FALL BEING 20' WIDE, 25' LONG, 8' THICK OCCURED AT #3 HEADING.
A ROCK FALL OCCURED AT SECTION 001, #4 HEADING. THE ROCK FALL MEASURED 17'W X 5'H X 18'L. NO INJURY OR DAMAGE TO EQUIPMENT OCCURED.
EMPLOYEE WAS UNLOADING STRUCTURE, WHEN BELT STRUCTURE FELL ON HIS RIGHT FOOT.
A ROCK FELL OUT BETWEEN BOLTS AND STRUCK EMPLOYEE ON HIS LEFT SHOULDER, NECK AND BACK AREA.
ROCK FELL OUT BETWEEN BOLTS AND HIT LEFT HAND.
PINNER STEEL FELL AND HIT HIM ON THE RIGHT HAND.
ROCK FELL OUT BETWEEN BOLTS AND HIT HIM IN THE LEFT RIB, BACK, FACE AND NOSE.
EE WAS CUTTING A PIECE OF BELT, WHEN KNIFE SLIPPED AND CUT HIS LEFT HAND.
EE WAS SETTING BOLTS WHEN ROCK CAME OUT BETWEEN BOLTS & HIT HIM IN THE RIGHT SHOULDER CAUSING A BRUISE
EE WAS OPERATING ROOF BOLTER WHEN ROCK FELL & HIT HIS RIGHT FOOT CAUSING A CONTUSION TO RIGHT ANKLE
EMPLOYEE DISCOVERED A ROCK FALL MEASURING 5'T X 20'L X 8'W.
EE WAS CHANGING PINNER STEEL WHEN A ROCK FELL & HIT HIS RIGHT HAND BRUISING IT
EE WAS WALKING FROM PINNER TO MINER, WHEN ROCK BEGAN TO FALL HE RAISED HIS HANDS TO PROTECT HISFACE & OBTAINED A LACERATION TO HIS RIGHT PALM FROM FALLING ROCK
EMPLOYEE WAS SPOTTING BOLTS TO PIN TOP, WHEN ROCKS FELL OUT AROUND BOLTS AND HIT HIM ON HIS RIGHT SIDE.
EMPLOYEE WAS ASSISTING BOLTER MAN IN SPOTTING BOLTS, WHEN ROCKS FELL OUT AROUND BOLTS AND HIT HIM ON THE RIGHT SIDE OF HIS FACE AND BODY.
EMPLOYEE DISCOVERED A ROCK FALL. IT MEASURED 6' THICK X 18' WIDE X 30' LONG.
EMPLOYEE WAS PULLING HOSE THROUGH MINER FRAME, WHEN HOSE BROKE AND HIT HIS RIGHT HAND.
EE DISCOVERED ROCK FALL BEING 40' LONG, 10' THICK, 18' WIDE.
EE DISCOVERED A ROCK FALL BEING 20' LONG, 18' WIDE AND 5-6' THICK.
ROCK FALL BEING 20' LONG, 30' WIDE, 6' HIGH.
A ROCK FALL MEASURING 30' X 24' X 4' WAS DISCOVERED AT 0225 ON 06/29/99 IN THE 001 SECTION, #2 ENTRY INBY SPAD 1421 BY EMPLOYEE DARRELL BLEVINS AND INSPECTOR PHIL SKORUPA.
HIGH ANGLE SLIPS AND POSSIBLE TRANSITION ZONE.
ROCK FELL & HIT RGHT HAND WHILE BOLTING.
HURT HIS BACK WHILE LIFTING TOOL BOX.
ROCK FELL IN THE #4 BELT ENTRY ON 3 LEFT BELT THE FALL WAS 26'X40'X10'.
ROCK FALL IN INTERSECTION OF BELT ENTRY 12 BREAKS OUTBY FACE OF .002 SECTION.
FALL WAS FOUND ABOUT 3:45 PM NOT KNOWN WHEN IT FELL FALL WAS 1800 FEET OUTBY SECTION #3 ENTRY NEUTRAL.
WHILE DRIVING A HAULER HE SAID HE HURT HIS BACK.
WHILE BUILDING A CRIB A CRIB BLOCK FELL STRICKIGN HIM ON THE FOOT.
A PIECE OF ROCK FELL STRIKING HIM ON THE BACK OF THE HEAD & NECK.
WHILE PULLING PINNER CABLE A ROCK FELL FROM THE CORNER STRIKING HIM ON THE BACK & NECK.
A PIECE OF ROOF BOLT STEEL FELL OUT OF TOP STRIKING HIM ON THE LITTLE TOE OF HIS LEFT FOOT.
WHILE SHEARING A PILLAR FOR BELT ALIGNMENT THE ROOF FELL.
INSERTING DRILL STEEL AGAINST TOP WHEN A PIECE OF ROCK FELL STRIKING HIM AGAINST RIGHT HAND INDEX FINGER.
RIB ROLL FELL STRIKING HIM IN BACK KNOCKING HIM DOWN.
GOT LEFT FOOT HUNG IN THE MUD TRY TO PULL IT LOSE AND STRUCK KNEE AGAINST ROCK.
ROCK FALL ABOVE ANCHORAGE. FALL WAS IN THE BELT ENTRY 24' OUTBY THE FACE. FALL WAS 20' X 15' X 7'.
EE WAS OPERATING THE ROOF BOLTER & SMALL PIECE OF ROCK FELL FROM THE TOP & STRUCK HIS HARD HAT AND LEFT NECK CAUSING A SLIGHT CONCUSSION & CONTUSION TO HIS LEFT NECK
EE WAS HELPING THE BELT MAN MAKE A SPLICE ON #3 BELT THE BELTMAN DRIPPED A CRIB BLOCK ON EE'S LEFT HAND AND BROKE 2 FINGERS
EE WAS EXITING THE 930 CAT LOADER AND SLIPPED AND FELL ON HIS RT SHOULDER.
EE WAS INSTALLING ELEVIN BRAKER TIMBERS IN THE #3 ENTRY WITH 4 OTHER MEN WHEN A PIECE OF ROCK BECAME DISLODGED FROM TOP & STRUCK HIS LEFT FOOT, INFLICTING A CUT. SIZE OF ROCK WAS 11" X 9" X 1" .
EMPLOYEE WAS OPERATING THE RIGHT SIDE OF THE LN243 ROOF BOLTER IN #4 RIGHT BREAK WHEN HE SET THEA.T.R.S. A ROCK BECAME DISLODGED FROM THE TOP AND SLID DOWN THE BOOM, STRIKING HIS LEGS.
THE SECTION FOREMAN WAS INSTALLING EIGHT BREAKERTIMBER IN THE #2 BLOCK WHEN A PIECE OF ROCK FELLDISLODGING TWO TIMBERS AND ONE OF THEM STRUCK HIS LEFT ARM DISLOCATING HIS ELBOW.
EE WAS OPERATING THE RIGHT SIDE OF THE ROOF BOLTER WHENA SMALL PIECE OF ROCK BECAME DISODGED FROM TOP AND EE JUMPED OUTOF WAY AND SPRAINED A MUSCLE IN HIS LOWER BACK.
A FALL OF ROOF FEL IN INTERSECTION ONE BREAK INBY SS #977 ON THE #4 BELT, APPROX. 3400' OUTBY WORKING FACE. SIZE OF FALL WAS 25' LONG, 25' WIDE AND 6' HIGH. FALL AREA WAS SUPPORTED WITH 48" RE SIN BOLTS, 72" POINT ANCHOR BOLTS, AND 6" X 16" BEARING PLATES.
EE WAS OPERATING THE RIGHT SIDE OF THE ROOF DRILL WHEN HIS LEFT FOOT CAME ENTANGLED WITH THE DRILL BOOM & ATRS OF THE BOLTER, CAUSING A CARPAL FRACTURE TO HIS FIRST & SECOND TOES ON HIS LEFT F OOT.
YEE WAS OPERATING THE OFFSIDE OF THE ROOF BOLTER AND AS HE LET THE ATRS DOWN FROM THE TOP. A SMALL PIECE OF ROCK FELL FROM BETWEEN BOLTS ALREADY INSTALLED AND HIT HIS SMALL LEFT FINGER. FIN GER HAD TO BE AMPUTATED AT 1ST JOINT.
EE WAS OPERATING THE ROOF BOLTER DRILLING TOP TO INSTALLA ROOF BOLT WHEN THE DRILL STEEL BENT UNDER THE MUD PRESSURE STRIKING HIS RIGHT ARM AND FRACTURING A BONE IN HIS WRIST.
EMP WAS OPERATING THE ROOF BOLTER. WHEN HE TURNED TO PICK UP A BOLT AND PLATE, A ROCK FELL FROM BETWEEN BOLTS ALREADY INSTALLED AND STRUCK HIS RIGHT FOOT.
EE WAS OPERATING THE LN800 MINER, WHEN A PIECE OF ROCK WAS THROWN BY THE CONVEYOR CHAIN & CUT HIS FOREHEAD ABOVE HIS LEFT EYE.
FALL OF ROOF FELL IN THE INTERSECTION, ONE BREAKINBY S.S.#214 ON INTAKE OF THE 001 SECTION. SIZEOF FALL IS 30'L, 20'W, 5'HIGH. ROOF WAS SUPPORTED WITH 48" X 5/8" BOLTS AND 6"X 16" PLATES.
A FALL OF ROOF FELL IN FACE OF #2 ENYRY ON THE 001 SECTION AT S.S.#1509 SIZE OF FALL IS 45'LX15'WX7'TO9'H. ROOF WAS SUPPORTED WITH 48" RESIN BOLTS AND 72" POINT ANCHOR BOLTS WAS SED AS A ADD ED SUPPLEMENT.
ROOF FALL ONE BREAK INBY SS#838 IN THE #6 NEUTIEL ON TEH #2 MAINS APPROX 4000' OUTBY WORKING FACE. SIZE OF FALL WAS 35'L, 12'W, 6'H. ROOF WAS SUPPORTED WITH 6' POINT ANCHOR BOLTS AND CRIBS.
EE WAS MAKING A BELT SPLICE ON THE #5 BELT WHEN A METAL FRAGMENT BROKE OFF OF THE HAMMER HE WAS USING AND STRUCK HIS RIGHT EAR, IMBEDDING IT IN THE LOWER LOBE.
EMP WAS REMOVING A BEARING CUP FROM A COAL HAULER WHEEL UNIT WITH A HAMMEA AN PUNCH WHEN THE CUPSHATTERED SENDING METAL FRAGMENTS INTO HIS LEFT FOREARM.
EE AND EMPLOYEE WAS PULLING A PIECE OF ROC FROM A BROW WHEN IT TURNED LOOSE, SLIDING DOWN PULL BAR CUTTING HIS LEFT FOREARM.
EE STATED THAT HE BENT OVER AND PICK UP MINED CABLE TO MOVE IT AND STRAINED HIS BACK.
THE MAN WAS MOVING A BOTTLE OF OXYGEN BY A PIECE OF TIEWIRE. WIRE BROKE CAUSING THE MAN TO FALL, BREAKING HIS RIGHT ARM.
EE STATED THAT HE WAS CARRING A 50# PAIL OF STOPPING PLASTER WHEN HE PULLED A MUSCLE IN HIS BACK.
A ROOF FALL OCCURED ON THE 1ST RIGHT D PANEL IN THE #5 NEUTTEL APP 150FT OUT BY WORKING FACE AT 5.5961 SIZE OF FALL IS 26FT WIDE 24FT LONG & 6FT HIGH
A ROOF FALL OCCURED ON THE #2 MAINS IN THE #5 NEUTRAL AT SS #839. THE FALL MEASURED 24' LONG, 17' WIDE AND 6' HIGH.
EE WAS STANDING NEXT TO A HAULER WHILE THE OUTSIDE PERSON WAS LOADING A PAN FOR A MINER, WHEN A CHAIN CAME LOOSE AND THREW A LOOSE BOLT IN THE RT SIDE OF HIS FACE.
A ROOF FALL OCCURED ON THE 1 MAIN AT 5/5 238 IN THE #1 AND #2 ENTRY. SIZE OF THE FALL IS 90' WIDE, 20' LONG AND 4 TO 5' HIGH.
A NUMBER OF ROOF FALLS OCCURED ON THE #1 MAINS IN THE #5, #6 & #7 HEADINGS. THE FALL IN #5 WAS 20' W., 20' L. &5' H. IT WAS IN THE NEUTRAL. THE FALL IN #6 & #7 HEADING WAS 90' W., 20' L. &5' H . IN THE NEUTRAL AREA.
EE WAS GOIGN DOWN THE #3 BELTLING, WHEN HE TRIPPED OVER THE WAERLINE, CAUSIGN HIM TO TWIST HIS RIGHT ANKLE.
INJURED WAS INSTALLING A BOTTOM BELT ROLLER ON THE #3 BELT. HE HAD PLACE A BAR UNDER THE TOP BELT SO HE COULD SET THE ROLLER FRAME ON THE BELT ROPE, WHEN THE BAR SLIPPED & STRUCK HIM ON THE LEFT SHOULDER & LEFT SIDE OF THE FACE.
A ROOF FALL OCCURED TEN BREAKS OUTBY THE WORKING FACE AREA, IN THE INTAKE OF THE 001 SECTION. BROKEN TOP W/LEFT SHALL MIXED WITH SAND STONE 32FT WIDE 17 FT LONG 6 FT HIGH.
A ROOF FALL OCCURED OUT BY THE #1 JEAL. MEASURED 6'X14'X15'.
EE WAS OPERATING THE OPERATOR SIDE OF THE TD-243 ROOFBOLTER, WHEN A ROCK 6"X 4"FELL FROM THE TOP AND STRUCK HIM ON THE RT HAND.
HE WAS IN THE FACE AREA WATCHING THE MINER CUT COAL, WHEN THE BOOM OF THE MINER HIT THE RIB BESIDE HIM, CAUSING A SECTION OF THE RIB TO FALL OFF STRIKING HIM.
A ROOF FALL OCCURED ON THE 001 SECTION IN THE #2 HEADING, 3 BREAKS INBY SPAD 587. THE FALL MEASURED 60' LONG 25' WIDE 4' HIGH.
A ROOF FALL OCCURED ON THE 001 SECTION INT EH #3 ENTRY, 3 BREAKS INBY SPAD #577. THE FALL MEASURED 50' LONG 30' WIDE AND 5' HIGH.
A ROOF FALL OCCURED IN THE #4 ENTRY TWO BREAKS INBY OVER CAST ON #1 BELT LINE AT SPAD #226. MEASURED 6' H X 40' L XZ 20' W. FALL WILL BE CLEANED UP.
A ROOF FALL OCCURRED ON THE 001 SECTION IN THE #2 ENTRY ONE BREAK UTBY SPAD #587 MEASURED 35FTLX20FTWX7FTH
A ROOF FALL OCCURED ON THE 002 SECTION, 2 BREAKES OUTBY SPAD #294, IN THE #1 ENTRY. FALL MEASURED 50' X 20' X 8'. WAS FOUND BY SAFETY MAN.
EE WAS BESIDE THE ROOF BOLTER WHEN A RIB. ROLLED OUT HITTING HIM ON THE LEC. RIB ROLL APPROX. 3000 LB THIS WAS ON THE 002 SECTION 2 LEFT ENTRY.
A ROOF FALL OCCURRED ON THE 002 SECTION INBY SPAD 445 ABOUT 1000 FROM FACE AREA OF 3 ENTRY DID NOT AFFECT BENTILATION FALL WAS 25 X25X 6. WAS REPORTED AROUND 330 PM WILL NOT BE CLEANED UP.
TWO ROOF FALLS OCCURRED OVER THE WEEKEND ON 002 SECTION-1 IN THE #1 ENTRY INBY SPAD #294, MEASURED 25'X15'X7' 1 IN THE #2 ENTRY INBY SPAD #289, MEASURED 40'X20'X8' WAS FOUND ONRRE SHIFT.
A ROOF FALL OCCURRED ON THE 002 SECTION, IN THE LAST OPEN CROSSCUT OF THE #2 ENTRY. 25' WIDE, 20' LONG, 6-1/2' HIGH. THERE WILL BE NO CLEAN-UP, & DID NOT INTERFERE W/VENTILATION.
EE WAS HELPING ON THE 001 SECTION MINER WHEN THEY BEGIN TO BADCK OUT OF THE FACE EE BENT TO GET THE MINER CABLE & WATER WIRE WHEN HE STOOD & THREW THE CABLE & THEN SOMETHING POPPED IN LOWER BA CK
EE WAS WORKING AS A MINER HELPER, WHEN TO BENT OT PICK UP & MOVE THE MINER CABLE. HE REPORTED SOMETHING "POPPED" IN HIS BACK. HE DIDN'T NOTIFY US UNTIL 3-16-93, OF THE ACCIDENT.
EMPLOYEE WAS WORKING ON THE DRILL HEAD OF A LEE-NORSE ROOFBOLTER, WHEN A ROOFBOLT FELL STRIKING THE CONTROLS CAUSING THE HEAD TO MOVE CAUSING THE LEFT HAND TO BE CAUGHT BETWEEN THE DRILL HEAD AND CANOPY.
A ROOF FALL OCCURRED ON THE 002 SECTION 10FT INBY JJ# 292 IN THE #4 HEADING 70FT LONG 17FT WIDE 10FT HIGH
EE WAS WORKING ON A MINER HIM AND ANOTHER EE WAS PULLING ON A SHAFT WHEN IT SLIPPED AND FELL ON FINGER. WAS CAUGHT BETWEEN MINER FRAME AND SHAFT.
A ROOF FALL OCCURED ON THE 002, SECTION, IN THE #6 HEADING. ONE BREAK INBY SS 283. 100' LONG, 17' WIDE, 10' HIGH.
I.NAME BRUSTING ROCK OFF MINER WHEN A PIECE OF ROCK FELL FROM THE TOP STRIKING EMPL ON HEAD AND RIGHT HAND. THE ROCK WAS 4' X 18" X 16".
A ROOF FALL OCCURRED ON THE 002 SECTION #2 HEADING IN A INTERSECTION 18FT WIDE 5FT HIGH 20FT LONG THE FALL OCCURRED DURING THE SECOND SHIFT
ROOF FALL OCCURRED ON 001 SECTION,2 BRKS INBY THE PILLAR LINE IN THE BLEEDER OF SPAD 80. THIS SECTION IS IDLE-9'HIGH X 17'WIDE.
85061S HELPING BUILD ON THE 001 SECTION. HE WAS STANDING IN THE BUCKET OF A HAULER REACHING CRIBS TO OTHER EMPLOYEES WHEN A ROCK FELL HITTING HIM IN THE TOP OF THE HEAD.
55061S CLEANING THE WATER SPRAYS ON THE MINER WHEN A ROCK 3X8X10X FELL FROM THE ROOF, HITTING HIM ON BOTH FEET CAUSING THE LEFT ANKLE TO CRACK.
55000TWO OTHER EMPLOYEES WERE SETTING TIMBERS WHEN THE TIMBER FELL, IT JERKED HIM DOWN. HE DID CONTINUE TO WORK UNTIL 8-17-92. THE JERK FROM THE TIMBER CAUSED PAINS IN THE UPPER BACK.
9?514E HELPING SET TIMBERS ON 001 PILLAR SECTION. BENT TO PICK UP A TIMBER AND FELT PAINS IN BACK. EMPL DID FINISH THE DAY OUT.
A ROOF FALL OCCURRED ON THE 002 SECTION.NO 4 HEADING BETWEEN 07-03-92 TO 07-06-92.IT WAS FOUND DURING THE PRE-SHIFT EXAM.07-06-92.IT WAS 6' HIGH 20' WIDE AND 20' IN LENGTH.
EE WAS WORKING ON THE HEAD OF A JOY MINER, PULLING ON A BAR, FELT PAIN IN BACK.
I NAME WAS BOLTING TOP IN THE #7 ENTRY WHEN A ROCK FELL FROM THE TOP MASHING HIS RT HAND
EMPL WAS HANGING BELT HANGERS WITH GALIS 320 ROOF BOLTER WHEN RIB ROLL OCCURED CATCHING HIM AGAINT ROOF BOLTER.
CLIMBING OUT OF LOADER SLIPPED AND BUMPED L KNEE ON LOADER IT HAD ICE ON IT
THE INJURED MAN WAS OPERATING A ROOF BOLTING MACHINE WHEN THE CUFF OF HIS GLOVE WAS CAUGHT BY THE ROTATING STEEL TWISTING HIS HAND IN SUCH A MANNER THAT IT FRACTURED HIS 5TH FINGER ON HIS LEFT HAND.
THE ACCIDENT WAS SUPPOSED TO HAVE HAPPENED ON 12-04-90,WHEN HE REPORTED THAT HE SLIPPED AND FELL WHEN HE STEPPED FROM A METAL PLATFORM AT THE MINE SITE,BUT DID NOT GO FOR MEDICAL TREATMENT UNT IL 12-20-90.
HE WAS CLEANING ROCK OFF THE MINER, PULLING ON ROCKS, HE FELT SOMETHING PULL IN LOWER BACK.
DROPPING MINER CABLE OVER HIGHWALL TO TAKE UNDERGROUND WHEN MINER CABLE CAME DOWN GUIDE WIRE IT PULL SHUTTLE CAR CABLE DOWN FROM TOP BENCH AND HIT PERSON IN HEAD CUTTING HIS HEAD IN 2 PLACES.
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.