While running the stone splitter, one of the machine chisel's carbide teeth broke off sending a metal shard into the operator's neck.
Jasper: 92 citaciones de la MSHA Metal/Non-Metal
Jasper tiene $12K en multas propuestas de MSHA y $0 pendientes en 1 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Jasper.
- Muertes
- 0
- Incidentes totales
- 37
- Años en registro
- 1983–2022
- Último incidente
- Mar 2022
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Jasper tiene $12K en multas propuestas de MSHA y $0 pendientes en 1 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Quedaron como emitidas 1 · 100%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| LAKE 2010-704M | Default | Lesnick | 2011 | $117 → $117 |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2025-12-10
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Quartz, respirable, >1% Qtz4419 en exceso
- Respirable dust, <.1mg21
Ver los análisis individuales (65)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2014-11-19 | Quartz, respirable, >1% Qtz | 0.3 | 0.24 | 1.25 | Stone Polisher/Cutter |
| 2014-11-19 | Quartz, respirable, >1% Qtz | 0.3 | 0.18 | 1.67 | Stone Polisher/Cutter |
| 2013-11-26 | Quartz, respirable, >1% Qtz | 0.39 | 0.23 | 1.70 | Stone Polisher/Cutter |
| 2013-11-26 | Quartz, respirable, >1% Qtz | 0.33 | 0.33 | 1.00 | Stone Polisher/Cutter |
| 2013-01-03 | Quartz, respirable, >1% Qtz | 0.59 | 0.24 | 2.46 | Stone Polisher/Cutter |
| 2011-01-25 | Quartz, respirable, >1% Qtz | 0.31 | 0.16 | 1.94 | Jackhammer Operator |
| 2011-01-25 | Quartz, respirable, >1% Qtz | 0.28 | 0.25 | 1.12 | Stone Polisher/Cutter |
| 2008-06-17 | Quartz, respirable, >1% Qtz | 0.26 | 0.22 | 1.18 | Stone Polisher/Cutter |
| 2008-05-20 | Quartz, respirable, >1% Qtz | 0.45 | 0.29 | 1.55 | Stone Polisher/Cutter |
| 2008-03-19 | Quartz, respirable, >1% Qtz | 0.17 | 0.17 | 1.00 | Stone Polisher/Cutter |
| 2008-03-19 | Quartz, respirable, >1% Qtz | 0.17 | 0.15 | 1.13 | Stone Polisher/Cutter |
| 2008-03-19 | Quartz, respirable, >1% Qtz | 0.36 | 0.27 | 1.33 | Stone Polisher/Cutter |
| 2008-03-19 | Quartz, respirable, >1% Qtz | 0.56 | 0.16 | 3.50 | Stone Polisher/Cutter |
| 2007-11-28 | Quartz, respirable, >1% Qtz | 0.36 | 0.18 | 2.00 | Stone Polisher/Cutter |
| 2007-11-28 | Quartz, respirable, >1% Qtz | 0.29 | 0.24 | 1.21 | Stone Polisher/Cutter |
| 2005-03-09 | Quartz, respirable, >1% Qtz | 1 | 0.21 | 4.76 | Stone Polisher/Cutter |
| 2002-06-05 | Quartz, respirable, >1% Qtz | 0.39 | 0.23 | 1.70 | Stone Polisher/Cutter |
| 2002-03-19 | Quartz, respirable, >1% Qtz | 0.33 | 0.21 | 1.57 | Stone Polisher/Cutter |
| 2002-03-19 | Quartz, respirable, >1% Qtz | 0.39 | 0.25 | 1.56 | Stone Polisher/Cutter |
| 2025-12-10 | Quartz, respirable, >1% Qtz | 0.21 | 0.26 | 0.81 | Stone Polisher/Cutter |
| 2025-04-01 | Quartz, respirable, >1% Qtz | 0.14 | 0.19 | 0.74 | Laborer, Bullgang |
| 2024-04-02 | Respirable dust, <.1mg | 0 | Drill Operator, Jumbo Perc. | ||
| 2024-04-02 | Respirable dust, <.1mg | 0 | Utility Man | ||
| 2022-10-12 | Quartz, respirable, >1% Qtz | 0.13 | 0.44 | 0.30 | Utility Man |
| 2022-10-12 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2022-10-12 | Quartz, respirable, >1% Qtz | 0.12 | 0.31 | 0.39 | Stone Polisher/Cutter |
| 2022-10-12 | Quartz, respirable, >1% Qtz | 0.13 | 0.21 | 0.62 | Stone Polisher/Cutter |
| 2020-03-04 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2020-03-04 | Respirable dust, <.1mg | 0 | Rotary Bucket Ex. Operator | ||
| 2019-10-02 | Quartz, respirable, >1% Qtz | 0.14 | 0.24 | 0.58 | Stone Polisher/Cutter |
| 2019-10-02 | Quartz, respirable, >1% Qtz | 0.17 | 0.29 | 0.59 | Stone Polisher/Cutter |
| 2017-05-23 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2017-05-23 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2017-05-23 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2016-02-23 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2016-02-23 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2015-04-28 | Quartz, respirable, >1% Qtz | 0.13 | 0.3 | 0.43 | Stone Polisher/Cutter |
| 2015-04-28 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2014-11-19 | Quartz, respirable, >1% Qtz | 0.23 | 0.25 | 0.92 | Stone Polisher/Cutter |
| 2014-01-22 | Respirable dust, <.1mg | 0 | Laborer, Bullgang | ||
| 2013-02-27 | Quartz, respirable, >1% Qtz | 0.13 | 0.42 | 0.31 | Stone Polisher/Cutter |
| 2013-02-27 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2013-02-27 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2011-11-22 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2011-11-22 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2011-03-30 | Quartz, respirable, >1% Qtz | 0.31 | 0.57 | 0.54 | Stone Polisher/Cutter |
| 2011-02-16 | Respirable dust, <.1mg | 0 | Jackhammer Operator | ||
| 2011-01-25 | Quartz, respirable, >1% Qtz | 0.16 | 0.22 | 0.73 | Jackhammer Operator |
| 2009-04-28 | Quartz, respirable, >1% Qtz | 0.38 | 0.41 | 0.93 | Forklift Operator |
| 2009-04-28 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2009-04-28 | Quartz, respirable, >1% Qtz | 0.26 | 0.41 | 0.63 | Cutting Mach Operator |
| 2008-11-18 | Quartz, respirable, >1% Qtz | 0.2 | 0.34 | 0.59 | Stone Polisher/Cutter |
| 2008-11-18 | Quartz, respirable, >1% Qtz | 0.27 | 0.36 | 0.75 | Stone Polisher/Cutter |
| 2008-11-18 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2008-11-18 | Quartz, respirable, >1% Qtz | 0.25 | 0.36 | 0.69 | Forklift Operator |
| 2008-05-20 | Quartz, respirable, >1% Qtz | 0.16 | 0.39 | 0.41 | Stone Polisher/Cutter |
| 2006-04-12 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2006-04-12 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2004-02-25 | Quartz, respirable, >1% Qtz | 0.12 | 0.29 | 0.41 | Stone Polisher/Cutter |
| 2004-02-25 | Quartz, respirable, >1% Qtz | 0.53 | 0.92 | 0.58 | Stone Polisher/Cutter |
| 2004-02-25 | Quartz, respirable, >1% Qtz | 0.14 | 0.23 | 0.61 | Stone Polisher/Cutter |
| 2004-02-25 | Quartz, respirable, >1% Qtz | 0.26 | 0.32 | 0.81 | Stone Polisher/Cutter |
| 2003-05-28 | Quartz, respirable, >1% Qtz | 0.19 | 0.44 | 0.43 | Jackhammer Operator |
| 2002-12-18 | Quartz, respirable, >1% Qtz | 0.36 | 0.8 | 0.45 | Drill Operator, Rotary Air |
| 2002-06-05 | Quartz, respirable, >1% Qtz | 0.12 | 0.7 | 0.17 | Stone Polisher/Cutter |
Muestras de área (aire de molino y taller)
Última medición: 2006-04-12, hace 20 añosVer los análisis individuales (4)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Área muestreada |
|---|---|---|---|---|---|
| 2006-04-12 | Respirable dust, <.1mg | 0 | MP GENERAL | ||
| 2006-04-12 | Quartz, respirable, >1% Qtz | 0.19 | MP GENERAL | ||
| 2005-03-09 | Quartz, respirable, >1% Qtz | 1.15 | MP GENERAL | ||
| 2005-03-09 | Quartz, respirable, >1% Qtz | 1.19 | MP GENERAL |
Jasper registró 15.83 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2008.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.- Jasper Stone Company 1950 a 2001
- L.G. Everist, Inc. 2001 al presente
| Año | Empleados |
|---|---|
| 2026 | 5 |
| 2025 | 5 |
| 2024 | 4 |
| 2023 | 5 |
| 2022 | 5 |
| 2021 | 3 |
| 2020 | 4 |
| 2019 | 5 |
| 2018 | 6 |
| 2017 | 6 |
| 2016 | 6 |
| 2015 | 4 |
| 2014 | 4 |
| 2013 | 4 |
| 2012 | 4 |
| 2011 | 5 |
| 2010 | 6 |
| 2009 | 11 |
| 2008 | 12 |
| 2007 | 9 |
| 2006 | 8 |
| 2005 | 8 |
| 2004 | 7 |
| 2003 | 7 |
| 2002 | 8 |
| 2001 | 7 |
| 2000 | 8 |
Jasper se ubica en Rock County, Minnesota, donde la categoría minera del Censo representa el 0.3% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 2,470 | 3 | 0 | 1214.6 |
| 2026 Q1 | 2,253 | 0 | 0 | 0.0 |
| 2025 Q4 | 2,167 | 0 | 0 | 0.0 |
| 2025 Q3 | 2,403 | 0 | 0 | 0.0 |
| 2025 Q2 | 2,455 | 0 | 0 | 0.0 |
| 2025 Q1 | 1,619 | 1 | 0 | 617.7 |
| 2024 Q4 | 1,916 | 0 | 0 | 0.0 |
| 2024 Q3 | 1,931 | 0 | 0 | 0.0 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 1,997 | 0 | 0 | 0.0 |
| 2024 Q1 | 2,457 | 0 | 0 | 0.0 |
| 2023 Q4 | 2,269 | 1 | 0 | 440.7 |
| 2023 Q3 | 2,427 | 2 | 0 | 824.1 |
| 2023 Q2 | 2,529 | 0 | 0 | 0.0 |
| 2023 Q1 | 2,440 | 0 | 0 | 0.0 |
| 2022 Q4 | 2,321 | 2 | 0 | 861.7 |
| 2022 Q3 | 2,594 | 1 | 0 | 385.5 |
| 2022 Q2 | 1,906 | 0 | 0 | 0.0 |
| 2022 Q1 | 1,943 | 0 | 0 | 0.0 |
| 2021 Q4 | 1,687 | 0 | 0 | 0.0 |
| 2021 Q3 | 1,595 | 0 | 0 | 0.0 |
| 2021 Q2 | 1,571 | 0 | 0 | 0.0 |
| 2021 Q1 | 1,478 | 0 | 0 | 0.0 |
| 2020 Q4 | 1,174 | 0 | 0 | 0.0 |
| 2020 Q3 | 2,285 | 0 | 0 | 0.0 |
| 2020 Q2 | 2,082 | 0 | 0 | 0.0 |
| 2020 Q1 | 1,773 | 0 | 0 | 0.0 |
| 2019 Q4 | 1,900 | 2 | 0 | 1052.6 |
| 2019 Q3 | 1,997 | 0 | 0 | 0.0 |
| 2019 Q2 | 2,872 | 1 | 0 | 348.2 |
| 2019 Q1 | 2,758 | 5 | 0 | 1812.9 |
| 2018 Q4 | 2,845 | 0 | 0 | 0.0 |
| 2018 Q3 | 3,623 | 1 | 0 | 276.0 |
| 2018 Q2 | 3,755 | 0 | 0 | 0.0 |
| 2018 Q1 | 3,218 | 0 | 0 | 0.0 |
| 2017 Q4 | 3,316 | 0 | 0 | 0.0 |
| 2017 Q3 | 3,356 | 0 | 0 | 0.0 |
| 2017 Q2 | 3,381 | 3 | 1 | 887.3 |
| 2017 Q1 | 3,604 | 0 | 0 | 0.0 |
| 2016 Q4 | 3,711 | 3 | 0 | 808.4 |
| 2016 Q3 | 3,669 | 0 | 0 | 0.0 |
| 2016 Q2 | 3,876 | 0 | 0 | 0.0 |
| 2016 Q1 | 2,801 | 4 | 0 | 1428.1 |
| 2015 Q4 | 2,065 | 0 | 0 | 0.0 |
| 2015 Q3 | 2,432 | 0 | 0 | 0.0 |
| 2015 Q2 | 2,572 | 2 | 0 | 777.6 |
| 2015 Q1 | 2,615 | 2 | 2 | 764.8 |
| 2014 Q4 | 2,488 | 9 | 3 | 3617.4 |
| 2014 Q3 | 2,575 | 0 | 0 | 0.0 |
| 2014 Q2 | 2,299 | 0 | 0 | 0.0 |
| 2014 Q1 | 2,344 | 0 | 0 | 0.0 |
| 2013 Q4 | 2,372 | 2 | 1 | 843.2 |
| 2013 Q3 | 2,598 | 0 | 0 | 0.0 |
| 2013 Q2 | 2,636 | 6 | 0 | 2276.2 |
| 2013 Q1 | 2,842 | 3 | 1 | 1055.6 |
| 2012 Q4 | 2,423 | 0 | 0 | 0.0 |
| 2012 Q3 | 2,633 | 0 | 0 | 0.0 |
| 2012 Q2 | 2,641 | 0 | 0 | 0.0 |
| 2012 Q1 | 2,783 | 2 | 0 | 718.6 |
| 2011 Q4 | 2,799 | 2 | 0 | 714.5 |
| 2011 Q3 | 3,396 | 0 | 0 | 0.0 |
| 2011 Q2 | 3,070 | 0 | 0 | 0.0 |
| 2011 Q1 | 2,119 | 7 | 1 | 3303.4 |
| 2010 Q4 | 2,082 | 0 | 0 | 0.0 |
| 2010 Q3 | 2,369 | 0 | 0 | 0.0 |
| 2010 Q2 | 2,564 | 0 | 0 | 0.0 |
| 2010 Q1 | 3,164 | 1 | 1 | 316.1 |
| 2009 Q4 | 3,595 | 0 | 0 | 0.0 |
| 2009 Q3 | 4,340 | 0 | 0 | 0.0 |
| 2009 Q2 | 4,961 | 4 | 0 | 806.3 |
| 2009 Q1 | 5,961 | 0 | 0 | 0.0 |
| 2008 Q4 | 6,164 | 1 | 0 | 162.2 |
| 2008 Q3 | 6,466 | 0 | 0 | 0.0 |
| 2008 Q2 | 6,254 | 1 | 0 | 159.9 |
| 2008 Q1 | 6,385 | 2 | 2 | 313.2 |
| 2007 Q4 | 4,822 | 1 | 0 | 207.4 |
| 2007 Q3 | 4,855 | 0 | 0 | 0.0 |
| 2007 Q2 | 4,460 | 0 | 0 | 0.0 |
| 2007 Q1 | 4,537 | 2 | 0 | 440.8 |
| 2006 Q4 | 3,531 | 0 | 0 | 0.0 |
| 2006 Q3 | 3,736 | 0 | 0 | 0.0 |
| 2006 Q2 | 3,880 | 1 | 0 | 257.7 |
| 2006 Q1 | 4,195 | 0 | 0 | 0.0 |
| 2005 Q4 | 3,806 | 1 | 0 | 262.7 |
| 2005 Q3 | 4,365 | 0 | 0 | 0.0 |
| 2005 Q2 | 5,157 | 0 | 0 | 0.0 |
| 2005 Q1 | 3,665 | 3 | 0 | 818.6 |
| 2004 Q4 | 4,517 | 0 | 0 | 0.0 |
| 2004 Q3 | 3,686 | 0 | 0 | 0.0 |
| 2004 Q2 | 3,910 | 0 | 0 | 0.0 |
| 2004 Q1 | 2,523 | 1 | 0 | 396.4 |
| 2003 Q4 | 3,710 | 0 | 0 | 0.0 |
| 2003 Q3 | 3,412 | 0 | 0 | 0.0 |
| 2003 Q2 | 3,698 | 0 | 0 | 0.0 |
| 2003 Q1 | 3,018 | 0 | 0 | 0.0 |
| 2002 Q4 | 4,359 | 4 | 0 | 917.6 |
| 2002 Q3 | 3,960 | 0 | 0 | 0.0 |
| 2002 Q2 | 4,231 | 2 | 2 | 472.7 |
| 2002 Q1 | 3,232 | 3 | 0 | 928.2 |
| 2001 Q4 | 3,708 | 0 | 0 | 0.0 |
| 2001 Q3 | 1,899 | 0 | 0 | 0.0 |
| 2001 Q2 | 3,652 | 0 | 0 | 0.0 |
| 2001 Q1 | 2,565 | 0 | 0 | 0.0 |
| 2000 Q4 | 3,139 | 1 | 0 | 318.6 |
| 2000 Q3 | 3,203 | 0 | 0 | 0.0 |
| 2000 Q2 | 3,076 | 0 | 0 | 0.0 |
| 2000 Q1 | 3,033 | 0 | 0 | 0.0 |
Incidentes reportables
37 en archivo2022 · 1 incidente
2018 · 2 incidentes
Employee was moving a pallet to take inside the saw shed when the employee heard shoulder pop.
EE was pitching stone using a hammer and chisel when EE felt a pain in the right arm.
2016 · 1 incidente
Working on a hydraulic leak and slipped on some fluid on the ground and twisted knee.
2015 · 1 incidente
Employee was setting a stone on a feeder conveyor of the splitter and pinched his finger tip between the stone and the conveyor frame.
2012 · 3 incidentes
Employee was splitting a rock, the splitter hung up under pressure. Employee was reaching to turn the splitter off to release pressure when the rock split and jumped backwards and hit his left hand middle finger.
Moving the seat wall stones. Putting slings under the stone. One employee moved his end to get his strap under and that shifted injured employee's end pinching his fingers.
Reported soar neck from operating excavator
2010 · 1 incidente
Cutting stone with a large hammer, rock split and fell towards employee. Employee strained body/back trying to get out of the way.
2009 · 2 incidentes
Coming down for lunch and slipped and fell. His arm landed on some branches, which cut his wrist.
Loading pallets out and finger got pinched between two rocks.
2008 · 2 incidentes
Putting stones on a pallet. Tried to push the top row in to make tighter. The rock pushed in and arm hit another rock and cut it.
Lifting rock up onto conveyor and back popped out of place/3 ribs
2005 · 1 incidente
After repairing hyd. hose ee slipped on a step while climbing down from the excavator injuring his left shoulder. Sore shoulder continued until he got scheduled for surgery on 5-11-05.
2004 · 1 incidente
EMPLOYEE WAS SPLITTING SLABS WHEN THE HAMMER HANDLE CAME OFF AND HIT HIS FINGER WHICH WAS ON THE ROCK HE WAS SPLITTING.
2002 · 1 incidente
EMPLOYEE WAS CLIMBING OUT OF TRACTOR WHEN HE LOST HIS FOOTING AND TWISTED HIS ANKLE. NOTE: EMPLOYEE WAS SUPPOSED TO START THERAPY ON 12/9/02 BUT HE QUIT WORK FOR OUT COMPANY ON 12/8/02.
1999 · 1 incidente
WHILE LIFTING GRIT BAGS STRAIN CAUSED NAVEL TO HERNIATE WENT TO DR 5-19-92 SAID AS LONG AS IT DID NOT BOTHER LEAVE IT ALONE NO LOSS OF TIME TIL NOW 3-8-99 HAVING IT SURGICALY REPAIRED.
1995 · 1 incidente
MAN WAS BARRING A STONE LOOSE, WHEN ANOTHER STONE ROLLER ONTO HIS RIGHT FOOT.
1994 · 1 incidente
CUT LEFT WRIST ON STONE WHILE REACHING FOR A DRILL BIT UNDER THE STONE.
1991 · 1 incidente
EMPL WAS WORKING AS WIRE SAW OPERATOR. BACK BECAME SORE & WAS UNABLE TO CONTINUE WORK. THERE WAS NO APPARENT CAUSE. HE HAS PREVIOUSLY INJ BACK & HAS HAD SURGERY TO CORRECT THAT INJURY.
1990 · 2 incidentes
EMPL JUMPED OFF FORKLIFT TWISTING HIP AND ANKLE.HIP INJURY DIDNT MANIFEST ITSELF UNTIL EMPL GHOT UP FROM CHAIR ON 9-23.1ST LOST TIME 9-24.SUFFERED SPRAIN OR STRAIN TO HIP.
EMPL WORKING ON WIRE SAW-LEANING AGAINST ANGLE IRON AND PULLED ON WIRE.PULLED TOO HARD AND BRUISED RIBS.
1989 · 1 incidente
EMPL WAS WALKING BETWEEN BUILDINGS SPIL & FELL ON ICE INJURING RIGHT WRIST.
1988 · 5 incidentes
EMPL WORKS AS A STONE CUTTER DEVELOPED A LOWER BACK PAIN THIS IS A REOCCURANCE OF A CHRONIC BACK PROBLEM
EMPL WALKING AROUND WORK STATION BUMPED INTO PALLET OF BLOCKS CAUSING CUT ON HIS SHIN.INFECTION RESULTED.
EMPL WAS HAND CUTTING STONE ON HIS WORK BENCH GOT STONE CHIP IN EYE. TREATED BY FIRST AID.
EMPLOYEE WAS LIFTING JAM LINK TO PLACE IT ON THE CRANE HOOK. HE DROPPED THE JAM LINK ON HIS LEFT FOOT.
EMPLOYEE WORKS AS A STONE CUTTER DEVELOPED A LOWER BACK PAIN THIS IS A REINJURY TO A CHRONIC BACK PROBLEM
1987 · 2 incidentes
EMP WAS LIFTING3STONE STRAINED LOWER BACK THIS IS REINJURY OF PREVIOUS INJURY. EMP HAS CRONIC BACK PROBLEM
EE WAS USING 200 BUSTING HAMMER CUTTING STONE-LOST CONTROL OF H AMMER & INUURED HIS SHOULDER.
1985 · 2 incidentes
EMP COMPLAINED OF A SORE BACK, IT WAS PROBABLY DUE TO LIFTING OF STONE WHILE AT HIS REGULAR WORK OF STONING CUTTING
UN 1975 EE INJURED RIGHT THUMB. IN RECENT YEARS A GROWTH DEVELOPED IN THAT THUMB 3 THE EE IS HAVING IT REMOVED.
1984 · 4 incidentes
EMP WAS LIFTING STONE ONTO HIS BANKER FELT SHARP PAIN IN LEFT SIDE
EMPL TIGHTENING BOLT ON MILL-WRENCH SLIPPED AND HE STRUCK HAND ON METAL FRAMEWORK.
EMP WAS HELPING HOOK STONE GOT FINGER SQUEEZED BETWEEN HOOK AND STONE INJ SECOND FINGER LEFT HAND CAUSING CUT AND BRUISE STITCHES REQUIRED
EE WAS CUTTING STONE BY HAND, INJURED LOWER BACK. THIS IS A REINJURY OF AN OLD INJURY.
1983 · 1 incidente
EMPLOYEE WAS BREAKING STONE WITH A HAMMER-FELT SHARP PAIN IN LOWER BACK. THIS IS A REINJURY OF AN OLD INJURY. EMPLOYEE RETURNED TO WORK ON 9-26-83 WITH A SORE BACK. HE HAD BEE N LAID OFF SINC E 7-2-83 BECAUSE THE QUARRY WAS SHUT DOWN DUE TO LACK OF WORK.