Rupert, Greenbrier Condado,
WV
·
Abandoned and Sealed
ID de mina MSHA: 4608522
Midland Trail Mine No. 1 tiene $94K en multas propuestas de MSHA y $0 pendientes en 5 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Midland Trail Mine No. 1.
Muertes
0
Incidentes totales
18
Años en registro
1996–2009
Último incidente
Jan 2009
Historial de cumplimiento
Citaciones de MSHA desde 2006
254
citaciones
76
significativas y sustanciales
$93,585
multas propuestas
$85,455
pagado a la fecha
91% de las multas propuestas pagadas a la fecha, una diferencia de $8,130.
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Actividad de inspección
Inspecciones de MSHA desde 2006
26
inspecciones registradas
2,197
horas de inspección
11.6
citaciones por 100 horas de inspección
ⓘEsta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.
254 citaciones en 2,197 horas de inspección.
Fuente: datos de inspecciones de MSHA, actualizados semanalmente.
Midland Trail Mine No. 1 tiene $94K en multas propuestas de MSHA y $0 pendientes en 5 expedientes impugnados.
Disposicion de multas
ⓘLas diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.
$94K
multas propuestas
$85K
evaluacion actual
$85K
pagado a la fecha
$0
pendiente
246 evaluaciones son ordenes finales; 5 expedientes impugnados.
Al ultimo periodo de evaluacion el 2009-03-04.
Fuente: datos de infracciones evaluadas y de conferencia/litigio de MSHA, actualizados semanalmente.
El muestreo de MSHA en Midland Trail Mine No. 1 muestra un polvo respirable de carbon promedio de 0.86 mg/m3 (88% en cumplimiento) en 144 muestras.
Muestreo de salud
ⓘUna muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.
Polvo respirable de carbon
ⓘLas cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
0.86
polvo prom. (mg/m3)
12.91
polvo max. (mg/m3)
88%
dentro de 1.5 mg/m3
144
muestras
Muestra mas reciente: 2009-03-04.
Silice (cuarzo)
8.4
silice prom. (%)
10.3
silice max. (%)
7
muestras
Muestra mas reciente: 2009-03-12.
Ruido
0%
sobre el LPE
4
muestras
Muestra mas reciente: 2008-03-23.
Fuente: registros de muestreo de polvo respirable, cuarzo y ruido de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
ⓘCitaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
EE was taking 4 waterline apart when it busted and projectiles from waterline stuck EE on his right hand. EE finished shift and reported to work on 1/6/09 but did not finish shift. EE is scheduled by doctor not to return to work until 1/16/2009. X-rays were negative.
2008 · 5 incidentes
3 de junio de 2008WV · CarbónElectricista, LinieroELÉCTRICO
While doing battery maintenance an acid water solution erupted out of the cell and came in contact with the employees eyes and face. Safety glasses were being used. The employee was immediately doused with water.
29 de mayo de 2008WV · CarbónDescontinuado el 31/1/2014. Varios otros códigos cubren al Operador de Carro CucharaHERRAMIENTAS MANUALES (SIN MOTOR)
The employee arrived at the mine site not feeling very well. He was leaning over the handrail at the mine office, prior to work. He was convinced to seek medical attention.The employee went home, showered and went to the hospital. He is diagnosed with blood flow restrictions, on medication with rest. No incident occured at the site.
An unintentional roof fall was found approximately 11:15 am on 1/17/08. The fall was located at the intersection of spad 793 on the old # 3 Belt Line. The #3 Belt Line is no longer in service. The fall is dangered off and all approaches have been cribbed. The fall will not be cleaned up. The dimensions are 20x20x5. The fall occurred due to weathering in the mine roof.
5 de enero de 2008WV · CarbónEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoTRANSPORTE MOTORIZADO
EE was riding personnel carrier when he went to adjust seat cushion,right hand slipped,he grabbed the side of the personnel carrier,the personnel carrier hit the mine floor, it smashed right ring finger and pinky finger against piece of rock. Cause of injury was awareness.Compliance with rules/regs not a factor,mining equip/systems not a factor, miner proficiency a factor.
An Un-Intentional roof fall was found in the number 5 entry outby spad # 651. The size of the fall measured 60 feet long by 20 feet wide by 5 feet high. All approaches to the fall were cribbed and dangered off. The fall occurred due to weathering in the mine roof. Type of roof support installed was 4 foot double-lock resin assisted bolts.
14 de septiembre de 2007WV · CarbónObrero, Cuadrilla, Mensajero de repuestos, Peón, Desconchador de techoTRANSPORTE MOTORIZADO
Employee was riding on mantrip when his CSE SR-100 he was wearing on his belt flipped over off the side of the mantrip and was caught between mantrip and portal canopy. His right arm struck the canopy cutting his arm. Miner proficiency a factor, mining equiment could be a factor, procedures and policies not a factor.
During a weekly airway examination a roof fall was discovered in # 1 enty 6 cross-cuts outby the face at spad # 998. The fall has been cribbed off with danger signs and will not requir clean-up. The fall measured 20 feet X 20 feet and 6 to 7 feet high. The intersection showed signs of failure during development and 6 foot double-lock bolts were used in the intersection.
During a pre-shift mine examination after a holiday week-end a roof fall was discovered in #3 entry, LOB, on 001 section, that measured 60 feet long, 20 feet wide and 6 feet to 7 feet high. The fall was cribbed off and plans are to clean up and re-support the fall.
During a weekly airway examination a roof fall was discovered approximately 40 feet inby spad no. 967. The fall measured 40 ft X 20 ft and above the anchor zone using 48 inch double lock roof bolts. The fall is 12 cross cuts outby the face. The fall area was supported and dangered off on all approaches. The fall will not be cleaned up.
During a weekly airway examination a roof fall was discovered in #4 entry 30 feet inby spad # 937 and extended 30 feet inby spad # 951. The fall is 20 feet wide approximately 40 feet long and 5 feet to 6 feet high. It is located approximately 20 cross-cuts outby the face and will not be cleaned up. Approaches are timbered and dangered off.
Employee was assisting setting conveyor belt tail piece. Employees tried to pry loose the stuck belt, the come-a-longs holding the tail piece loosened and the tail piece fell down on the employee's right foot. Compliance with rules/regs not a factor. Protective equipment not a factor. Mining equipment/sytems not a factor. Miner proficency a factor.
A roof fall was found in the crosscut from the number 2 entry to the number 3 entry between survey spads 830 and 831. The fall measured 6' high by 20' wide by 40' long. Cause of the fall was the deterioration of the main roof due to weathering. The roof fall did not obstruct ventilation or escapeways.
Employee was attempting to remove a piece of rock from cable reel of shuttle car. The employee slipped and rolled his ankle. Result of the injury was a fractured ankle.
3 de enero de 2007WV · CarbónBandero, Operario de transportador, Trabajador de banda transportadora, Operario de puente móvil, Operador de alimentador, Vigilante de transportadorTRANSPORTE MOTORIZADO
EE was operating rubber tire Mack 8 personnel carrier when the front wheel hit a hole in mine floor causing the steering wheel to spin catching his right pointer finger, causing a dislocation. Cause of this injury was awareness. Compliance with rules/regs not a factor, mining equip/systems not a factor, miner proficiency a factor.
An un-intentional roof fall occurred in the intersection of number 6 entry on the working section mmu-001, one break inby the section loading point. The roof fall measured approximately 30'feet in length x 18'feet wide x 5' to 5 1/2' feet high.
WATER SEEPING FROM ROOF- FALL OCCURRED LESS THAT A THOUSAND FT FROM CROPIC.
For insurers, brokers, and safety consultants
The full compliance file on Midland Trail Mine No. 1
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.