Mine No 1 Coal

Employee was using a prybar to reposition the oil tank on a dozer. EE's prybar slipped causing the employee to fall backward and hurt EE's lower back.

Employee was swinging a sledge hammer to knock the pin out of a track and felt a sharp pain in shoulder. Employee continued to work employee's regular duties and was sent for an MRI. Employee was sent to Ortho 3/15/23 and was diagnosed with a torn rotator cuff and placed on light duty. Surgery is scheduled for 4/18/23.

Employee was moving the forks on a skid loader. As EE was sliding the fork, EE pinched EE's finger between the fork and the carriage resulting in a small fracture to EE's left thumb.

Employee was using a hand-held grinder when a piece of metal got in EE's right eye. Employee was wearing a welding helmet and EE's prescription glasses when the accident occurred. Eye doctor removed the metal fragment from EE's eye.

Employee works as a mechanic on the surface and over the last 37 years has developed a repetitive motion injury (carpal tunnel) in hand. Employee underwent surgery on 8/5/19 to correct this condition.

Employee slipped on ice in the parking lot while walking to rock truck. Employee was diagnosed with a herniated disc in lower back. Continued to work until surgery date on March 28, 2019.

Contract employee was picking up motors at PBS Warehouse. The motor was frozen to the ground and when Ee attempted to lift it and hit the pallet to break it free, the hook came undone and struck employee above left eye causing laceration.

Employee slipped going down ice-covered steps on Hitachi Shovel and fell, injuring back and neck. Employee continued to work normal job until ee was seen by orthopedic surgeon on 3/14/2019 and placed off work.

Employee was loading nitrogen cylinder into service truck. While lifting the cylinder, the employee felt a sharp pain in lower back.

A miner was injured while operating a CAT 375 excavator when the hoist cylinder failed and broke the side window on the cab. The broken glass contacted the operators right hand and caused a small laceration. The miner received two sutures.

The injured employee was unloading a piece of steel from the back of a delivery truck. Another employee was assisting him to unload it. The steel moved in an awkward way and stuck the injured person in the left knee.

An employee was dismounting a D-11 dozer at break time. The environment was dry. The hand railing, foots steps and grab rails were all found to be in good condition. The employee remembers climbing down to the push arm of the dozer blade. He woke up lying on the ground. The height from the ground to the top of the push arm he was standing on is 36 inches.

Employee was climbing down the ladder of a CAT 777 rock truck when his foot slipped on ice on the last step. The employee did have three points of contact and when his foot slipped off the step he pulled his left shoulder. PBS Coals, Inc. was notified that the employee will need surgery to repair his left shoulder. First day of work missed was December 21, 2010.

Employee injured his right shoulder while shoveling the tracks on a dozer. While removing the dirt from the tracks with a shovel, the shovel contacted a bolt and quickly stopped the shovel and injured the employee's right shoulder. The employee had surgery on his right shoulder on January 03, 2011 and he has been off work since that date.

The employee was climbing down the ladder located on the side of the shovel. The lower steps have ridges on them for traction so your boots don't slip. While dismounting the machine, the wedding band on his left ring finger caught the ridge on the step and cut his left ring ringer.

EE squatted and heard a pop in his right knee.

Employee was mounting his machine when he slipped and fell to the ground injuring his left shoulder.

Employee dropped steel beam on left foot; was approximately 40-50 lbs, 6' long x 13' wide and 1/4" thick.

Employee was using hard control settings to move main pump out of O&K shovel, EE was caught in machinery between the lifting boom and front bed of truck. Employee was air lifted to Conenaugh Hospital.

EE was walking through field, tripped over a root and fell on knee. Went to doctor on 10/28/08, at which time he went off work.

Twisted left knee slipping off steps of lube truck. Employee reported injury on 1/4/07. A second opinion by an independent physical on Feb 5th put employee off work on Feb 5th 2007.

Employee was cleaning D-11 tracks; he slipped & fell injuring his left knee.

Pulled muscle in right shoulder while installing turbo in a rock truck when it slid and he tried to stop it. He recently on Aug 17, 2006 was diagnosed with a torn rotor cuff and went off on Aug 18th to prepare for surgery.

Employee was helping dismantle a D9 dozer when the left push arm fell from the dozer strking his right leg and foot.

A HYDRAULIC FIRE WAS DETECTED ON THE D-11 DOZER ON JOB 234 AT 1:30 AM. THE FIRE WAS FIRST DETECTED ON THE LEFT SIDE OF THE MACHINE UNDER THE CAB AREA. CREW USED ALL POSSIBLE MEANS TO PUT FIRE OUT WITH NO SUCESS. THE BERLIN VFD EXTINGUISHED THE FIRE WITH CHEMICAL FOAM. OPERATOR HAS 25 YEARS EXPERIENCE - 12 YEARS ON D-11.

Employee dismounted machine at end of shift and stepped on a large stone twisting his right ankle.

Employee dismounted water truck and stepped onto a rock and twisted his ankle. Went off work on 8-23-05.

EE was uncoupling quick start coupling from 777B rock truck when he stepped on an uneven area of frozen ground, he lost his balance and twisted his left knee that had previously had problems.

EMPLOYEE WAS ENTERING THE CAB OF THE DOZER AT START OF SHIFT WHEN BUMPED HIS HEAD ON THE DOOR FRAME (FOREHEAD AREA) CAUSING A LACERATION.

Employee was outside of 7820 dragline checking dragline walls for weakness when he slipped and fell.

EMPLOYEE STATED HE WAS RAISING HIS DRILL SEAT TO ADJUST HEIGHT. HE FELT PAIN IN BACK. THE EMPLOYEE HAS BEEN SCHEDULED FOR ANOTHER TEST TO VERIFY IF IT IS JOB RELATED.

EMPLOYEE WAS INSTALLING A PUMP ON A 988 DOZER WHEN HE FELT NUMBNESS IN HIS RIGHT ARM. INITIAL REPORT WAS MADE TO COMPANY AND WAS NOT REPORTABLE UNTIL MARCH 1, 2004 WHEN EMPLOYEE WENT OFF WORK (AFTER SEEING A SPECIALIST).

INJURED PERSON WAS SITTING IN A ROCK TRUCK WITH WINDOW DOWN SLIGHTLY. HIS LEFT EYE SUDDENLY STARTED HURTING. DIRT WAS FOUND IN HIS EYE AT A PHYSICIAN'S OFFICE. HE RECEIVED EYE DROPS AND MISSED TWO DAYS WORK.

INJURED PERSON WAS OPERATING A ROCK TRUCK AT A STRIP SITE. ABOUT 6 HOURS INTO HIS SHIFT HE NOTICED THAT HIS BACK WAS HURTING PRETTY BAD. HE WAS DIAGNOSED AS HAVING BACK PAIN WITH GRADE1 SPOND YLOLISTHESIS. HE WAS GIVEN A PRESCRIPTION AND TOLD TO WEAR A BACK BRACE.

EE WAS BLOWING DIRT OUT OF CORE FOR AIR CONDITIONER WHEN HE ACCIDENTALLY TURNED ON SWITCH TO ACTIVATE A 4" PLASTIC FAN IN THE CAB OF TRUCK. THE FAN STRUCK HIS FINGER CAUSING A LACERATION.

EE DISMOUNTED THE D-9 DOZER AND FELT PAIN IN LOWER RIGHT LEG. EE NOTIFIED COMPANY THAT HE WAS GOING TO THE CHIRO ON 3-28-03. CHIRO REFERRED HIM FOR MRI. MRI TAKEN ON 4-2-03. IMPRESSION FROM MR I SHOWS DEGENERATIVE DISC DISEASE.

EMPLOYEE NOTIFIED OFFICE THAT HE HAD SEEN A M.D. ON 3/24/03 AND WAS INSTRUCTED TO STAY OFF WORK FOR ONE WEEK. EMPLOYEE STEPPED FROM DRILL TO GROUND LEVEL AND FELT PAIN AT THE BALL OF HIS FOOT.

EMPLOYEE REPORTED ON 12/9/02 AN ACCIDENT BUT DID NOT SEEK MEDICAL. HE INFORMED COMPANY ON 2/21/03. HE WILL BE HAVING SURGERY ON 2/28/03. EMPLOYEE SAID HE WAS REPAIRING THE ENGINE ON A ROCK TRU CK WHEN HE FELT SHARP PAIN AS HE RAISED HOOD OF ROCK TRUCK.

EE WAS INSTALLING GRADE STAKES. WHEN HE FINISHED INSTALLING THE LAST STAKE HE LOST HIS BALANCE ON UNEVEN GROUND SURFACE FALLING GROUND LEVEL TO THE GROUND. WHEN HE FELL HE TRIED TO BREAK FALL WITH LEFT ARM. ALL PRESSURE FROM FALL WAS TO LEFT ELBOW CAUSING A CHIP IN ELBOW FROM BODY WEIGHT.

TEAM MEMBER WAS TIGHTENING A BOLT ON THE ALTERNATOR OF THE OK 120 SHOVEL. HE EXTENDED HIS RIGHT ARM IN A HORIZONTAL POSITION TO REACH IN AND TIGHTEN BOLTS WHEN HE FELT A SHARP PAIN IN RT. SHOU LDER.

EE WAS REMOVING BOLTS FROM THE U JOINT OF, BOLTS, THE DRIVE SHAFT FROM THE WATER TRUCK. EE FELT PAIN IN UPPER RIGHT SHOULDER AS HE LOOSENED BOLTS.

EE WAS MOUNTING D-11N DOZER CAT WHEN HE LOST HIS BALANCE HE GRABBER THE HAND RAIL AND ALL HIS BODY WEIGHT PULLED ON HIS RIGHT ARM.

A TEAM OF MAINT. WAS FORMED TO COMPLET MAINT. ON THE 7820 DRAGLINE. TEAM WAS PULLING DOORS OPEN AT COUNTERWEIGHT AREA WHEN EE STUMBLED. EE WAS ON LEVEL SMOOTH DRY COMPACTED SOILS. WHEN EE STUM BLED HE TURNED RIGHT ANKLE.

PRYING WITH PRY BAR ON BOOM OF 992-C. LOST BALANCE SLIPPED AND FELL, INJURING MIDDLE AND LOWER BACK.

EE WAS EXITING MACHINE. AS HE OPENED THE DOZER DOOR HE PULLED HIMSELF FROM THE SEAT AT THE DOOREDGE AREA. THE WIND BLEW THE DOOR SHUT ON HIS FINGERS.

EE WAS BURNING A CROSS MEMBER ON A BELT STRUCTURE THAT WAS ON THE GROUND. AS HE BURNED THRU THE LAST WELD POINT THE METAL BRACE LET LOOSE AND STRUCK HIM IN THE FACE.

EMPLOYEE GOT OFF MACHINE TO GO TO SHOP AREA. IT WAS A COLD FREEZING DAY. EMPLOYEE SLIPPED AND FELL IN PARKING LOT STRIKING HIS HEAD ON THE INNER EDGE OF HARD HAT AS THE HARD HAT CAME OFF HIS H EAD ON THE GROUND.

OPERATOR WAS ESTABLISHING A BACK UP BEAM ON THIS OPERATOR'S 2ND TRIP HE BACKED BEYOND THE AREA. HE WENT TO EDGE OF DUMP AREA. THE EDGE GAVE WAY AND THE ROCK TRUCK WENT OVER THE EDGE.

EE WAS CLIMBING ONTO 77B ROCK TRUCK (ENGINE AREA). A PLATE WAS LOOSENED ON THE FLOOR AND EE STEPPED ONTO PLATE THEN INTO THE AREA PLATE COVERED.

AT END OF SHIFT EE WENT TO CRUSHER TO CHECKBELT AND CHECK HYDRAULIC LEVEL OF TANK. EE CHOOSE NOT TO USE WALKWAY WITH HANDRAILS AND SLIPPED AND FELL TO GROUND.

EMPLOYEE WAS NOT PAYING ATTENTION OF HAND POSITION WHILE CLOSING A TAILGATE OF SITE TRUCK AND CLOSED GATE ON RIGHT HAND.

EE LOWERED THE BOOM ON A 25D NORTHWEST DRAGLINE AND WAS COMPLETING SERVICE OF HOIST ROPES AND LUBRICATION POINTS WHEN HE SLIPPED TO THE GROUND APP 3 1/2 FEET. THE CONDITIONS WERE RAINY AND SLI PPERY DUE TO RAIN AND LIMESTONE MIXTURE.

EE WAS PRYING WITH PRY BAR WHEN THE BAR SLIPPED HOLD AND STRUCK EE ON THE FOREHEAD.

EMPLOYEE WAS PRYING WITH A PRY BAR WHEN IT SLIPPED OUT OF POSITION CAUSING INJURY.

OPERATOR TWISTED BACK WHILE REFUELING DOZER.

EMP WAS WALKING ON DOZER AREA NEAR DRAGLINE AND TWISTED HIS ANKLE ON ROUGH WALK AREA.

EMPLOYEE WAS HELPING AS A MECHANIC TO REPAIR A STEERING ROD. THERE WAS BURNIGN INVOLVED IN THE REPAIR. THE EMPLOYEE FORGET ABOUT THE BURING AND PUT HIS HAND ON HOT METAL AS HE GOT UP.

EMPLOYEE WAS WORKING ON PUMP CLAIMED HAND INJURIY SEVERAL DAYS LATER. EMPLOYEE KNEW OF ACCIDENT ONLY FROM HOSPITAL BILLS.

EMPLOYEE WAS WALKING NEAR A TIRE TRUCK, WHENA CHAIN SLIPPED AND HIT HIS ARM & SHOULDER.

TWO EMPLOYEES WERE REMOVING ROCKS FROM ADDCAR WHEN LARGE ROCKS FELL ON THE ADDCAR IN BY THE ONE THEY WERE CLEANING. THIS THREW THE TWO MEN TO THE PIT FLOOR. THIS CAUSED A FRACTURED ELBOW ON ON E AND A FRACTURED WRIST ON THE OTHER.

TWO EE WERE REMOVING ROCKS FROM ADDCAR WHEN LARGE ROCKS FELL ON THE ADDCAR INBY THE ONE THEY WERE CLEANING. THIS THREW THE TWO MEN TO THE PIT FLOOR. THIS CAUSED A FRACTURED ELBOW ON ONE WAY AN D A FRACTURED WRIST ON THE OTHER.

EE WAS REMOVING A MEDIUM SIZED ROCK FROM PUSH ARM OF A D-11 DOZER WHEN THE ROCK FELL ON HIS LEFT FOOT CAUSING A HAIRLINE FRACTURE OF LEFT FOOT, SMALL BONE.

EMPLOYEE WAS PUTTING CABLE ON LEGGING, WHILE PERFORMING THE TASK HE WAS USING A HAMMER TO HAMMER IN CABLE IN SLEAVE GROVE AND STRCK FINGER.

EMPLOYEE SLIPPED AND FELL STRIKING HIS HEAD AS HE WAS DESCENDING STEPS FROM CABLE REEL.

EMPLOYEE CUT MIDDLE FINGER, LEFT HAND WHILE CUTTING METAL. EMPLOYEE DID NOT REPORT TO COMPANY ACCIDENT IN A REASONABLE TIME TO FILE 7000-1.

EE WAS ADJUSTING FRICTION BEND ON 7400 DRAGLINE WHEN TOOL SLIPPED AND HIS EE ABOVE EYE.

EMPLOYEE WAS HELPING REMOVE A PIN FROM BUCKET OF DEMAG WHWN PIN CAME THROUGH OTHER OUTLET STRIKING EMPLOYEE AT RIGHT SIDE OF EAR & HEAD AREA.

EE WAS LIFTING AND TURNING AT THE SAME TIME A BOX OF WELDING RODS.

EMPLOYE EWAS STEPPING UP ON THE TILT BED OF A ROLL BACK TRAILER WHEN HE SLIPPED AND STRUCK HIS CHIN.

EE WAS BURNING A BEARING WHEN HE RECEIVE A PUNCTURE WOUND FROM HOT METAL.

EE WAS HELPING REPAIR A 637 PAN WHEN HE PULLED A MUSCLE IN BACKAREA.

MOVING CRIB BLOCKS TO UNLOAD DRAGLINE FROM TRAILER.

EMPLOYEE WAS SLEDGING A PIN FROM BUCKET OF MACHINE WHEN HE STRAINED HIS BACK.

EE SLIPPED FROM STABLIZIER BAR OF D-11 DOZER AS HE DISMOUNTED SLIPPED BACKWARD APP ELEVATION OF 3INCH INTO FUEL TRUCK CONTRIBUTING FRACTORS WERE RAIN COMBINED WITH MUD MAKING A SLIP HAZARD.

EE WAS REMOVING A PIN FROM FRAME ON SET UP OF A COAL SCREEN-SCREEN WAS UNDER SOME PRESSURE WHEN EE REMOVED PIN UNIT SLID FORWARD CAUSING PINCH POINT AND CUTTING HAND.

OPERATOR OF ROCK TRUCK DETERIOTED BACK UP BERMS BY PULLING ROCK TRUCK TO NEAR EDGE OF DUM POINT. TRUCK WENT OVER DUMP AREA DUE TO OPERATOR IMPROPERLY EXAMINING DUMP AREA.

EMPLOYEE STRAINED HIS BACK WHILE ASSISTING INT HE MOVE OF A LEVEL WIND BAR.

A CRAIN HAD PASSED OVER A SMAEVY AREA PACKING THE SNOW WITH THE COLD TEMP AND WINDS THIS AREA TURNED TO ICE. THE EE WAS WALKING ACROSS CRANE ROADWAY WHEN HE SLIPPED AND FELL INJURY LEFT LEG AN KLE AREA.

EE WAS DESCENDING FROM MACHINE AND LOST HAND GRIP FALL APP. 9' TO GROUND.

LOOSE TRACK PAD ON CRAWLER UNIT OF HOE.

PUTTING PLATE INSIDE A DRAGLINE TUB - PLATE BROKE IN CENTER AND CAME DOWN ON EMPLOYEE'S RIGHT KNEE.

EMPLOYEE WAS LIFTING A FRICTION BAND WHEN HE FELT PAIN IN HIS LOWER BACK.

BRUISED BACK AREA WHILE OPERATING PAN.

EMPLOYEE WAS WALKING FROM BACK HOE TO SHOP WHEN HE FELT SHARP PAIN WAS LOWER BACK. EMPLOYEE HAD PREVIOUS BACK PROBLEMS THAT WERE NOT JOB RELATED.

EMPLOYEE WAS HELP LEFT A ENGINE PART TO THE GROUND SLIPPED & SCRAPER THE TIBIA BONE AREA RT LEG 6 STITCHES TO EFFECTED AREA

EMPLOYEE WAS LIFTING A TURBO WITH A PIPE & FELT LOWER BACK PAIN.

EMPLOYEE WAS PULLING HIMSELF ONTO A D-9N DOZER TO REFUEL THE DOZER WHEN HE FELT A PAIN IN LOWER STOMACH AREA.

GETTING OFF LUBRICATION TRUCK AND CAUGHT BUTTOCK ON DOOR.

MECHANIC WAS TIGHTENING MAST PIVOT MOUNTING BOLTUSING 3/4" RATCHET AND CHEADER BAR AND OVER-EXERTION CAUSING A TEAR IN LOWER LEFT ABDOMEN MUSCLE.

EMPLOYEE LOST FEELING IN LEFT AND RIGHT HAND.

EMPLOYEE WAS PICKING UP A LARGE ROCK TO COVER SMALL HOLE IN DISCHARGE HOSE OF WATER PUMP.

EMPLOYEE WAS REFUELING A TRAC-DOZER WHEN HE SLIPPED AND FELL INJURYING HIS BACK.

EMPLOYEE WAS PLACING BIT SUB ON DRILL ROD & SUB FELL CATCHING FINGER AGAINST DRILL TABLE.

EMPLOYEE WAS OPERATING A ROCK TRUCK WHEN HE INJURED HIS BACK TRAVELING OVER ROUGH ROADWAY.

EMPLOYEE WAS DOZERING RECLAIM AREA AND WAS IN SOME BAD BOTTOM AND AS TURNED IN HIS SEAT HE RAISED UP TO SEE AND MACHINE TURNED HIM INTO SIDE OF SEAT INJURING HIS RIBS.

EMPLOYEE WAS OPERATING A RECK TRUCK WHEN HE CLAIMED TO TRAVEL OVER ROUGH ROAD BOUNCING IN SEAT INJURING HIS BACK

MECHANIC WAS REMOVING A BROKEN DOWEL PIN FROM THE POWER HEAD HOUSING ON A DM-50 INGERSOLL DRILL#3348 & THE HOUSING DROPPED & CRUSHED THE FINGER TIPS OF THE LITTLE FINGER & FINGER OF LEFT HAND

45235NDING FROM A LADDER WHILE REPAIRING A CAT 773 AND SLIPPED ON NEXT TO LAST RUNG OF LADDER.

EMPL LOWERING FLYWHEEL FROM PAN WHEN FELT PAIN IN LOWER BACK AREA.

EMPLOYEE WAS INSTALLING AN AXLE WHEN THE TOOL HE WAS USING SLIPPED AND EMPLOYEE STRUCK CHIN.

EMPLOYEE WAS WALKING AROUND MACHINE WHEN HE STEPPED INTO TRACK HOLE ON GROUND- BROKEN LEFT FOOT.

EMPLOYEE WAS CLEANING HIS WRENCH SHIELD WHEN HE SLIPPED FROM HIS MACHINE & COMPLAINED OF BACK PAIN

GOING TO SHUT OFF WELDER AND STEPPED INTO HOLE AND TWISTED OR PULLED LEFT KNEE.

EMPLOYEE WAS LIFTING TRUCK TIRE OFF THE BED OF A PICKUP TRUCK WHEN HE FELT A SHARP PAIN IN HIS LEFT SHOULDER.HE SUSTAINED A SPRAIN AND PARTIAL DISLOCATION OF THE LEFT SHOULDER.

MATER LOOSE AFTER FREEZING STRUCK HIM

EE WAS GETTING OUT OF TIRE TRUCK AND STEPPED ON A WET MUDDY ROCK AND TWISTED HIS ANKLE.

EMPLOYEE WAS FIXING BRAKE FLANGE FOR 7500 MARION DRAGLINE WHEN IT SLIPPED OFF BUCKET OF FRONT END LOADER THAT WAS CHAINED AND HE STRUCK HIS FOOT FRACTURING HIS TOE.

EE WAS USING A HYDRAULIC MANRIEL PUMP TO HOIST AND RAISE THE TUB OF A 7400 MARION DRAGLINE WHEN HE FELT A SHARP PAIN IN HIS LOWER BACK.

EMPLOYEE WAS GRUNDING ON TRUCK FRAME WHEN THE CRIBBING FELL ON HIS LEG.

PICKING UP BARREL HURT BACK

EMPLOYEE WAS CLEANING UP AREA, PICKING UP METAL WHEN HE TWISTED HIS ANKLE. (DIDN'T KNOW HE WAS OFF TILL 4-18-90)

LOOSENING BOLTS,WRENCH SLIPPED OFF ALLOWING MECHANICS HAND TO STRIKE AGAINST MACHINE.

EMPLOYEE WAS HELPING TO FIGHT A DRAGLINE FIRE. WHILE MOVING AN OXYGEN TANK FROM THE MACHINE HE INJURED HIS KIDNEY.

AN EMPLOYEE WAS BURNING THE HOIST GEAR WHEN MOLTEN METAL FELL INTO THE CENTER PIN AREA OF THE DRALING CAUSING & IGNITING GREASE.

PLEASE BE ADVISED THAT (NAME) RETURNED TO WORK ON 11-20-89 FROM AN ACCIDENT DATED 08-23-89.HE IS PRESENTLY OFF WORK AGAIN BEGINNING 01-19-90.

ROCK SLIP BECAME LOOSE FREEZING TIME SLIP C AME LOOSE SLIDING UP AGAINST HOE AND BARRIER BETWEEN HISGHWALL AND MACHINE DOING SLIGHT DAMAGE TO HOE

EMPLOYEE WAS WELDING IN A SMALL CONFINED HARD TO GET AREA ON THE 7500 DRAGLINE WHEN HE PULLED MUSCLES IN HIS SHOULDER.RECEIVED REPORT 12-04-89 IN OFFICE.

EMPLOYEE WAS CUTTING A BLOCK ON BOOM OF 7500 DRAGLINE. THE BLOCK SLID DOWN THE PLANK OF BOOM CATCHING A LOOPE IN ACETHYLENE HOSE CAUSING HANDLE OF TORCH TO CATCH ON RIGHT GLOVE AND CUTTING HI S RIGHT HAND.

EMPLOYEE WAS CLIMBING OFF FUEL TRUCK WHEN HE TWISTED HIS KNEE.

EMPLOYEE WAS CLIMBING DOWN LADDER TO CHECK HYDRAULIC OIL. THE STEPS WERE BENT IN MAKING EMPLOYEE MISS THIRD STEP. HE CAUGHT HIMSELF WITH HIS LEFT HAND PULLING HIS ARM SHOULDER AND BACK AND F ELL TO THE GROUND.

EE WAS LIFTING CABLE AND COUPLES

STEPPING FROM DOZER TO PAN LOST FOOTING PULLING SHOULDER AND ARM MUSCLES.

EMPLOYEE WAS CLIMBING DOWN OFF A 777 LADDER. WHEN HE GOT TO THE BOTTOM CABLE STEP IT TWISTED HIM AROUND.

EE WAS LIFTING CRIB BLOCK TO PAN SCRAPPER WHEN HE PULLED A MUSCLE IN HIS CHEST AREA.

EMPLOYEE WAS PUTTING OIL IN OIL TANK ON THE SIDE OF THE MACHINE WHEN HE SLIPPED AND FELL TO THE GROUND.

EMPLOYEE WAS WORKING ON STEP LADDER TAKING BOLTS OUT OF HOSES WHEN HE PULLED ON THE BOLT THE STEP LADDER SLIPPED OUT FROM UNDER HIM & HE FELL ON THE GROUND

EMPL STANDING WHEN ROCK FROM HIGHWALL CAME DOWN AND STRUCK HIM.

EMPLOYEE WAS UNLOADING CRIB BLOCKS OFF TRUCK WHEN HE CAUGHT FINGERS BETWEEN BLOCK AND TRUCK BED CAUSING SEVERE BRUISES TO RIGHT RING FINGER

EMPLOYEE WAS CLIMBING ONTO DOZER .HE GRABBED ONTO THE SIDE PANEL ON THE ENGINE,WWHICH WAS BEING WORKED ON BY OTHER EMPLOYEES,WHEN THE ISDE PANEL GAVE WAY CAUSING THE EMPLOYEE TO LOSE HIS BALAN CE AND JUMP BACK ON HIS FEET,CAUSING INJURY TO EMPLOYEES BACK.

EMPLOYEE WAS BACKING 777 CAT TRUCK UP TO DUMP ON ROCK FILL WHEN THE TRUCK TURNED OVER ON ITS SIDE

EMPLOYEE WAS TIGHTENING AIR CONDITIONER BELT WHEN HE WAS CALLED ON THE RADIO. HE WENT BACK INSIDE THE DOZER AND BUMPED HIS HEAD ON AIR CONDITIONER LID IN CAB.

EMP. WAS WAITING BESIDE DRILL CAB TO PREPARE TO DRILL WHEN THE DRILL MAST BROKE LOOSE A TREE LIMB WHICH HIT EMP. ON HIS HARD HAT.

EMP. TWISTED BACK WHILE CLEANING DOZER TRACKS.

EMPLOYEE WAS OPERATING FRONT END LOADER CORRECTING A HIGH WALL AREA AND WAS JARRED BY THE MACHINE.

EMPL MOVING GRA8ER FROM JOB 30 TO JOB 14.JARRING OF GRADER CAUSED INJURY TO EMPL BACK.

EMPLOYEE WAS GE7TING ONTO MACHINE WHEN HE FELL OFF THE STEP AND ONTO LEFT SIDE, HE TRIED TO BREAK FALL AND INJURED LEFT HAND AND WRIST.

EMPLOYEE WAS TA5ING MANIFOLD OFF 355 KOMATSU WHEN HE FELL BACKWARDS OFF FRONT OF TRACK AFTER FOOT GOT CAUGHT

EMP WAS CLIMBIN1 ON TRUCK TO LEVEL LOAD AND TARP. WHEN HE SLIPPED AND RT LEG HIT SIDE BOARDS OF TRUCK

WHEN JUMPING DO4N FROM ROCK TRUCK WHICH HE WAS OPERATING, HE SPRAINED HIS ANKLE.

VICTIM WAS CUTT3NG ON PLATES FROM BOTTOM OF DRAGLINE WHEN STEEL PLATE FELL AND HIT VICTIM ON RIGHT FOOT AND LEFT SHOULDER.