Registro de la MSHA sobre No 11 (ID de mina 1512917). Muertes, incidentes no mortales agrupados por año, operador y controlador actuales, y contexto de la mina.
Avísenme cuando se presente un nuevo incidente de la MSHA en No 11.
EMPLOYEE WAS LIFTING A PIECE OF METAL WHEN BACK PAIN OCCURRED. THE DATE STATED IN ITEM 6, WAS WHEN THIS BECAME REPORTABLE.
THIS FORM IS FOR ADDITIONAL TIME OFF THEAT EE TOOK DUE TO THE PAIN HE HAD ON THE DATE STATED IN ITEM 6 THIS IS NOT A NEW INJURY A COPY OF THE INTIAL REPORT.
EMPLOYEE TRIPPED ON A PIECE OF S/C CAR CABLE, WHILE UNLOADING THE CABLE FROM THE RAILMOTOR, HITTING HIS MOUTH AGAINST THE SIDE OF THE MOTOR, BREAKING TWO OF HIS FRONT TEETH.
ROCK FALL ON THE #4 CUT DURING PILLAR EXTRACTION. THE FALL CAUGHT THE HEAD OF THE MINING MACHINE. THE ROCK WAS 4' THICK 30' WIDE AND 15' LONG.
EMPLOYEE WAS PUSHING A BOLT UP TO THE TOP WHEN A SMALL PIECE OF DRAWROCK FELL, STRIKING HIM ON THE LEFT SIDE OF THE HEAD. THIS INJURY REQUIRED 4 STITCHES.....
ROCK FALL IN #5 ENTRY 70'L 18'W 7'T
ROCK FALL AT THE FACE OF NO. 3 ENTRY CAUGHT THE CONTINUOUS MINING MACHINE. THE MINING MACHINE IS RUN BY REMOTE CONTROL. THE FALL WAS 25' LONG 19' WIDE AND 3'-1' THICK.
EMPLOYEE WAS SHOVELING COAL FROM UNDER BELT, WHEN HE HA D APIN IN HIS BACK. THIS IS NOT THE FIRST INCIDENT THIS EMPLOYEE HAS HAD WITH BACK PAIN.
EMPLOYEE WAS TRIPPED BY S/C CABLE WHILE WALKING ACROSS THE SECTION LANDING ON HIS HIP. HE DID NOT LOSE ANY TIME OR GET ANY MEDICAL TREATMENT UNTIL THE DATE STATED IN ITEM 6. THIS INJURY HAPPEN ED ON 02-28-92. HE IS OFF BECAUSE OF BACK PAIN. THIS IS NOT THE FIRST PROBLEM HE HAS HAD WITH HIS BACK.
ROCK FALL IN #3 ENTRY ON #4 BELT. THE FALL WAS 15' LONG 10' WIDE AND 0-10' THICK. THE FALL WAS FOUND BY THE BELT EXAMINER.
EMPLOYEE WAS MAKING A BELT SPLICE, WHEN THE TOOL (RED DEVIL) SLIPPED, HITTING HIM IKN THE FACE.
ROCKFALL ON THE PILLAR LINE IN THE NO 3 CUE THE CONTINUOUS MINING MACHINE WAS CAUGHT BY THE FALL THE FALL WAS 14 FT WIDE 30FT LONG & 4FT HIGH
RF FALL IN NO 3 ENTRY AT BREAK 99 FOUND BY BELT EXAMINER 40'L 2'-4' T AND 18'W
DRAWROCK FELL STRIKING EMPL ON LEFT FOOT AND LEG
RIB ROLLED OFF, PUSHING HIM INTO THE BOLT MACHINE, WHERE HE RECEIVED CUTS TO THE CHIN AND TOP OF THE HEAD. THIS INJURY REQUIRED STITCHES.
A PIECE OF DRAWROCK FELL FROM BETWEEN THE BOLTS, STRIKING HIM ON THE FOOT.
EMPLOYEE GOT A PIECE OF METAL IN HIS LEFT HAND WHILE SPLICING A CONVEYOR CHAIN ON THE C/M.
EMPLOYEE STRAINED HIS BACK WHILE PULLING THE MINER CABLE. EE IS TAKING THERAPY FOR THIS INJURY.
FELL DOWN STEPS AT OFFICE TWISTED R KNEE
ROCKFALL BREAK 119 FROM THE PORTAL. THE FALL WAS 100' LONG 17' WIDE AND 3' TO 5' THICK. CRIBS WERE INSTALLED IN THIS AREA AROUND THE FALL.
EMPLOYE EWAS LIFTING A FLAP ON A TAILPIECE AND TWISTED HIS WRIST. THIS INJURY BECAME REPORTABLE ON THE DATE STATED IN ITEM 6.
EMPLOYEE SLIPPED WHILE PUTTING A ROLELR IN ON BELT SETUP.
ROCKFALL BRK 109 IN #5 ENTRY.FALL WAS 25'LONG X 20'WIDE X 3-4'THICK.FALL WAS FOUND AT THE BEGINNING OF THE SHIFT.
ROCKFALL ABOUT 25FT LONG & 20FT WIDE & 3FT-4FT THICK WAS FOUND AT 230AM BY THE 3RD SHIFT FOREMAN FALL WAS IN NO 5 ENTRY 4 BREAKS OUTBY THE PILLAR LINE ON 004-D SECTION
EMPL WAS CRAWLING OVER LOOSE ROCK WHEN HE REHURT LEFT KNEE. EMPL STARTED GETTING TREATMENT ON DATE STATED IN ITEM 6.
DRILLING PC OF DRAWROCK FELL STRUCK HIM L FOOT
ROCKFALL ON TRACK ON BREAK 112 #4 ENTRY DANGERD OFF AND ADDITIONAL SUPPORT WAS ADDED ROCK IS BCLEANED UP AND RE BOLTED
EMPLOYEE WAS DRILLING A HOLE WHEN A PIECE OF ROCK FELL, STRIKING HIKM ON THE LEFT HAND.
STARTING TO DRILL WHEN A PICE OF DRAW ROCK FELL STRIKING INJURED ON THE CHIN.THIS INJURY REQUIRED STITCHES.
CHECKING AT BELT MAKING SPLICE OUTBY #5 BELT STARTED THE BELT UP HE FELL
EMPL WAS PULLING FEEDER CABLE WHEN HE FELT PAIN IN LOWER ABDOMINAL REGION.
EMPLOYEE WAS SETTING A S/C JACK WHEN A PICE OF DRAW ROCK FELL,HITTING HIM ON TOP OF THE FOOT.
EE WAS WORKING BESIDE OF THE FEEDER AS HE TUREND HE STRUCK A CABLE HANGER WITH HIS RIGHT EYE. MEDICATION WAS PRESCRIBED FOR THIS INJURY.
ROCK FALL IN NO 3 ENTRY
FALL OCC 2 ROWS OF PILLARS OUTBY PILLAR LINE IN 3 ENTRY 60 L 19W AND 4-6' T TIMBERED AND DANGERED OFF
EMP SWITCHING TRACK AT TRACK SWITCH WHEN CAUGHT THUMB BETWEEN RAIL
ROCK FALL ON BELT LINE IN 3 ENTRY 5 BREAKS OUTBY SPAD 129 ON 002-0 SECTION CLEANED UP AND RE BOLTED
ROCK FALL ON #2 BELT 25 BRKS INBY PORTAL IN #3 ENTRY.FALL FOUND BY PRESHIFT EXAMINER 6-16.FALL IS 18'WIDE X 12'LONG X 3'THICK.
EMPLOYEE WAS SHOVELING FROM UNDERNEATH A HEADDRIVER.INJURED STARTED RECEIVING THERAPY ON THE DATE STATED IN ITEM 6.
SC CABLE HANGING THROUGH A BREAK.I.NAME STARTED THROUGH THE BREAK WHEN SC OPER STARTED THE SC,THE CABLE CAME ACROSS ENTRY CATCHING I.NAME ON THE ANKLE.
EMPL LIFTING RAIL THAT GOES ON THE SIDE OF MINER WHEN HE HAD PAIN IN HIS BACK.I.NAME STARTED GETTING MEDICAL TREATMENT ON 5-13.
THE FALL WAS IN A INTERSECTION ON 002 SECTION RETURN ABOUT 3000 OUTBY FACE THE FLL WAS 25FT WIDE 18FT LONG AND 4 FT THICK.
DRILLING WHEN PC OF ROCK FELL CATCHING R HANDD RESULTING IN FRACT
EMPLOYEE SLIPPED ON WATER LINE AND FELL, PULLING A MUSCLE IN HIS BACK. HE STARTED GETTING TREATMENT FOR THIS INJURY ON THE DATE STATED IN ITEM NO. 6.
EMPL TRIPPED ON BELT ROLLER TWISTING KNEE.
ROCK FALL OCCURRED ON 002-0 SECTION IN #4 ENTRY, IT WAS FOUND BY THE PRESHIFT EXAMINER 3-10-91. THE FALL WAS ABOUT 40' LONG 18' WIDE AND 5' THICK.
FINAL CUT ON PILLAR ROOF FELL CATCHING THE CONTINUOUS MINING MACHINE
ROCKFALL CAUGHT THE CONTINOUS MINING MACHINE DURING THE FINAL PUSH IN A PILLAR LIFT.
ROCK FALL OCCURRED ABOUT 7 BREAKS OUTBY FACE IN #4 ENTRY. FALL WAS ABOUT 50' L 18' WIDE & 6' THICK. AREA WAS TIMBERED & DANGERED OFF.
THE ROCK FALL WAS FOUND BY 3RD SHIFT AT THE BEGINNING OF THEIR SHIFT. THE FALL WAS IN # 3 ENTRY 2 BREAKS OUTBY FACE. THE FALL WAS 50' LONG 18' WIDE AND 2'TO8' THICK.
EMPLOYEE GOT HIS GLOVE CAUGHT BETWEEN HEAD OF THE BOLT MACHINE & A ROOF BOLT
EMPL CAUGHT FINGERS BETWEEN FRAME OF SCOOP.
BOLTING WAS BEING DONE IN THE CROSSCUT BETWEEN 6 AND 7 HEADINGS, WHERE THEY WERE BEING SQUARED UP. THE ROCK FELL THROUGH THE CROSSCUT AND IN THE NO. 6 HEADING. HE WAS IN THE DECK OF THE BOLTER , WHEN THE ROCK HIT THE CANOPY. HE WAS PUSHED DOWN IN THE DECK BY THE CANOPY AND RECEIVED A LACERATION ON THE HEAD (5 STITCHES).
EMPL SETTING BITS IN MINER,STRUCK BIT WITH HAMMER AND PIECE OF METAL EMBEDDED IN HAND.RECD MEDICAL ATTENTION ,STITCHES WERE REQUIRED.
I.NAME WAS LOWERING THE DRILL STEEL WHEN IT UNCOUPLED THE PUSHER PART OF THE STEEL STRUCK I.NAME ON THE WRIST CAUSING A LACERATION, IN WHICH REQUIRED STITCHES.
I NAME STARTED TO MOVE INTO POSITION TO INSTALL ROOF BOLTS WHEN A PIECE OF ROCK FELL BETWEEN THE ATRS & RIB STRIKING I NAME ON THE CHEST & ARM
HE WAS LOWERING FLAPPER GUARD ON A MINER WHEN IT DROPPED CATCHING HIS LITTLE FINGER ON HIS RIGHT HAND. THIS RESULTED IN A FRACTURE.
THE ROCK FALL OCCURRED BETWEEN 10-13-89 & 10-15-89. FOUND ON 3RD SHIFT ABOUT 9:00 PM 10-15-89. THE FALL OCCURRED APPROX. 400' OUTBY FACE IN #4 ENTRY IN A INTERESECTION. THE FALL WAS ABOUT 25' LONG 18' WIDE & 3' TO 5' THICK. THE AREA WAS DANGERED OF AND A PLAN DEVELOPED FOR CLEANUP.
EE WAS PUTTING A PIECE OF METAL UNDER THE TRACK OF A MINER WHEN HE CAUGHT HIS INDEX FINGER BETWEEN THE METAL AND A CRIB, CAUSING A LACERATION WHICH REQUIRED 9 STITCHES.
002 SECTION WAS DOING PILLAR WORK WHEN THE FINGAL PUSHOUT WAS TOOK AND THE MINER WAS BACKING OUT THE ROOF FAELL CATCHING THE MINING MACHINE AND IMPAIRED PRODUCTION ON THIS SECTION UNTIL WE CAN DEVELOPE A PLAN TO ENSURE THE SAFETY OF PERSONELL WHILE RETIVEING THE MACHINE
EMPLOYEE WAS HELPING ON THE MINER I NAME WAS WAITING FOR THE MACHYINE TO BACK OUT OF A CUT WHEN HE HEARD A CRACK OVER HIS HEAD WHEN HE STARTED TO MOVE A PIECE OF ROCK ABOUT 3FT WIDE & 7FT LONG TO A TAPER TOP FELL FORCING HIM TO THE BOTTOM CAUSING LEGS & PELVIC FRACTURES
EMPL WAS BENDING OVER TO PICK UP A CURTAIN WHEN HE TWISTED HIS KNEE
EMPLOYEE WAS DRILLING A TEST HOLE WHEN HE BEGAN TO LOWER THE HEAD ON THE MACHINE THE STEEL CAME APART AT A COUPLING STRIKING I NAME ON THE SIDE OF THE HEAD CAUSING A SMALL LACERATION WHICH RE QUIRED THREE STITCHES
HIT HOLE WHILE DRIVING SHUTTLE CAR
EMPLOYEE WAS LOADING ROCK DUST ONTO A SHUTTLE CAR THEN WHEN HE RETURNED TO THE OPER DECK AND STARTED TO TRAM THE MACHINE HE NOTICED A HURTING IN HIS HIP AND BACK OF LEG THE EMPLOYEE REPORTED
WAS RUNNING BOLT MACHINE AND CAUGHT HIS FINGER BETWEEN ROOF BOLT PLATE AND WRENCH WHEN PUSHING ROOF BOLT UP.
WAS SETTING TIMBERS #1 BELT BREAK 3 PICKED UP 4X 8 TIMBER CAUSIGN INJ. TO BACK.
HE WAS HELPING UNLOAD CRIB BLOCK. WHEN ANOTHER EMPLOYEE THREW A BLOCK STRIKING HIM ON THE RIGHT HAND.
DUE TO FAULT IN MINE ROOF.ROOF FALL OCCURRED IN #3 ENTRY 4 BRKS INBY ON #1 BELT.15'LONG X 18'WIDE X 3-4' THICK.
WHILE INSTALLING 42 IN RESIN RODS HE CAUGHT HIS RT MIDDLE FINGER BETWEEN THE BOLTMACHINE WRENCH AND THE TOP IT BROKE THE FINGER JUST BEHIND THE FINGER NAIL
WHILE OPERATING BOLTMACHINE HE WAS STRUCK BY A SMALL PIECE OF DRAWROCK CAUSING MINOR CUTS & ABRASIONS
WHEN CARRYING A 5 GAL. BUCKET OF OIL IN LOW COAL HE TWISTED HIS BACK CAUSING PAIN IN THE LOWER PART OF HIS BACK.
A SHUTTLE CAR WAS GOING BY HIM, IT RAN OVER A BLOCK OF COAL. IT BURST AND STRUCK HIM ON THE KNEE. HE HAS FLUID ON HIS KNEE. HE DID NOT MISS WORK UNTIL 4-29-88.
HE WAS OPERATING A BOLTMACHINE WHEN A PIECE OF ROCK FELL FROM THE TOP STRIKINNG NG HIM ON THE HAND ATRS WAS IN USE AT THE TIME OF T HE ACCIDENT
WHILE BOLTING T2E TOP, HE LET THE BOLTMACHINE HEAD DOWN ON HIS RIGHT FOOT.
WHILE OPERATING3A FLETCHER BOLT MACHINE A PIECE OF DRAWROCK FELL, STRIKING HIM ON THE BACK AND LOWER PART OF THE RT LEG. SIZE OF ROCK APPROX 1 INCH THICK 2 FT LONG AND 2 FT WIDE
WHILE REPLACING3A MOTOR ON THE MINER, HE HIT HIS HAND WITH A HAMMER.
WHILE CLEANING 6P A PIECE OF ROCK FELL HITTING THE SCOOP BUCKET A SMALL PIECE OF ROCK HIT HIM IN THE EYE CAUSING A SMALL CUT ON THE PUPIL OF THE EYE
WHILE LIFTING A3TOOL BOX OUT OF A SCOOP BUCKET HE PULLED A MUSCLE IN HIS BACK
WHILE WALKING A5ONG THE TRACK, HE HIT A ROOF BOLT PLATE WITH THE RIGHT SIDE OF HIS HEADER.
WHILE CUTTING A3PIECE OF CONDUIT HIS KNIFE SLIPPED AND HIT HIS ARM CUT HIS ARM ABOVE THE WRIST
WHILE LOADING C9IB ON SUPPLY CAR HE FELL INJURING HIS MIDDLE FINGER ON H IS RT HAND.
WHILE ON COMPAN2 PROPERTY THE EMPLOYEE WAS STUNG BY A SAND HORNET ON THE RIGHT LEG AT THE TIME HE DOES NOT THIMK MEDICAL TREATMENT IS NEEDED.
FAULT IN MINE R2OF.25' X 5-6'THICK X 18'WIDE.
WHILE OPERATING3A FLETCHER BOLT MACHINE A PIECE OF CAP COA L FELL,STRICKING HIM ON THE BACK.
FAULT IN MINE R2OF.APPROX. 12'WIDE 15' LONG 42"THICK.NO.1 BELTLINE 250' UP THE BELTLINE.
WHILE RUNNING A3BOLT MACHINE HE WAS STRUCK ON THE NOSE WITH A 4" STRAP.
EMPLOYEE WAS GO3NG INTO LIGHTHOUSE AND SLIPPED ON STEPS BREAKING RIGHT ANKLE. DID NOT MISS ANY DAYS UNTIL 5-18-87.
ROCK FALL IN TH9 4 ENTRY 200 FT INSDE DRIFT MOUTH ROCK FALL WAS 25 FT LONG 16 FT WIDE AND 4 TO 5 FT THICK THE LOCATION OF WHERE THE FALL WAS HAD SLATE AND SAND STONE TOP. THERE WAS A SMALL COA L SEAM ABOUT 4 3NCH THICK ABOUT 5 FT UP IN THE FALL AREA.
EMPLOYEE WAS STRUCK DOWN BY ROCK FALL WHILE HELPING PULL MINER CABLE
ROCK FALL IN #4 ENTRY,TRACK ENTRY AT 2ND BREAK ABOVE SPAD #188 NEAR END OF TRACK.FALL WAS FROM WEAK ROOF AREA HAVING SLATE AND SANDSTONE MIXED.FALL WAS 35\LONG X 20\WIDE X 5\HIGH.NO AIR RESTRI CTION ,ESCAPEWAY IN #5 CLEAR.
EMPLOYEE WAS TAILPIECE WITH SCOOP TAILPIECE BECAME ENTANGLE WITH CURTAINS. HE WAS TRYING TO LOOSE CURTAINS, SCOOP MOVED PINNING EMPLOYEE BETWEEN TOP OF M INE AND TAIL PIECE.
3 ROCK FALLS WERE FOUND, DURING THE INSPECTION OF THE MINES FOR RE-OPENING FEDERAL INSPECTORS AND THE COMPANY SUPERTENTENT THE FALL WERE IN THE #2 ENTRY #1 FALL 40\ BY 20\ BY 54" THICK #2 FAL ICK.
3 ROCK FLL WERE FOUND DURING THE INSPECTION OF THE MINES FOR RE-OPENING FEDERAL INSPECTORS AND THE COMPANY SUPERINTENDENT THE FALL WERE IN THE #2 ENTRY. #3 FALL WAS 35\ X 20\ X 6" THICK
3 ROCK FALLS WERE FOUND DURING THE INSPECTION OF THE MINES FOR RE-OPENING FEDERAL INSPECTORS AND THE COMPANY SUPERINTENDENT - THE FALLS WERE IN THE #2 ENTRY. #2 FALL WAS 25\ X 20\ X 54" THICK
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.