Employee was loading roof bolts onto roof bolter when he picked up a hand full of bolts he twisted around and strained his back.
No. 8 Coal
No. 8 tiene $27K en multas propuestas de MSHA y $0 pendientes en 17 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en No. 8.
- Muertes
- 0
- Incidentes totales
- 16
- Años en registro
- 2010–2012
- Último incidente
- Aug 2012
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.No. 8 tiene $27K en multas propuestas de MSHA y $0 pendientes en 17 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en No. 8 muestra un polvo respirable de carbon promedio de 0.38 mg/m3 (98% en cumplimiento) en 143 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2012 Q3 | 16,043 | 0 | 0 | 0.0 |
| 2012 Q2 | 21,561 | 29 | 12 | 1345.0 |
| 2012 Q1 | 23,737 | 20 | 7 | 842.6 |
| 2011 Q4 | 20,122 | 6 | 2 | 298.2 |
| 2011 Q3 | 21,787 | 10 | 3 | 459.0 |
| 2011 Q2 | 23,321 | 15 | 5 | 643.2 |
| 2011 Q1 | 18,312 | 20 | 1 | 1092.2 |
| 2010 Q4 | 21,395 | 3 | 1 | 140.2 |
Mostrar 1 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2010 Q3 | 15,249 | 14 | 4 | 918.1 |
Incidentes reportables
16 en archivo2012 · 4 incidentes
A roof fall has occurred located 4 crosscuts U.G. inby from the surface. 3600' from the face. The fall was 20' in length 20' width and 6' in height. The fall will be cleaned up.
Employee was standing next to a scoop when the scoop moved. It struck his left foot.
Employee was packing a bundle of roof bolt plates and he dropped them on his right foot bruising it on the side of his foot.
2011 · 9 incidentes
Roof fall occurred in the No 1 return entry 270 ft outby the coal face. The fall was 20 ft long 30 ft wide and 7 ft thick. The fall will not be cleaned up. The entrance to fall is dangered off and supported as per roof control plan.
Roof Fall 4,500 feet from face #4 entry. Fall was 6' in Height 18' in Width and 50' long. The fall will be cleaned up. Clean up plan is developed.
Employee was roof bolting when a piece of draw rock fell and hit his right thumb when he was putting the drill still in the pot it fracture his right thumb.
Employee was putting scoop on charge when he twisted his right knee.
Employee was getting shuttle car loaded when shuttle bounced and his head hit the canopy of the shuttle car.
The fall was at survey station #317 in the #7 entry, 1800 ft from the face. The fall was 5 ft in height, 20 ft in width and 60 ft in length. The fall will not be cleaned up. The entrance to the fall is dangered off and supported as per roof control plan.
Roof fall in #5 entry, 1 brake outby spad #313. 10'high 20'width 60' in length. Entrance to fall was dangered off and supported as per roof control plan and will not be cleaned up.
Employee was cleaning out drill steel when he hit himself in the forehead with the drill steel cutting his forehead. He received 4 stitches.
EE dropped a bundle of roof bolts plates on top of his left foot cutting it. He received 5 stitches on top of his foot.
2010 · 3 incidentes
EE was hitting drill steel with a wrench, when the wrench bounced back and hit him on the forehead. He received 6 stitches on his forehead. Came back to work the next day, no lost time.
Employee had moved roof bolter in 3 left to let the continuous miner back up. When a piece of draw rock, paper thin to 2" thick by 2' wide and 3' long fell and hit him on his back causing abrasions and contusions and 1 cracked vertebra.
Employee was standing talking to boom truck operator when the operator pushed lever to move outrigger. The outrigger struck employee's left arm.
The full compliance file on No. 8
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.