Coworker mis-stepped while climbing a water truck, slipped and cut EE's face.
Ormrod Quarry: 126 citaciones de la MSHA Metal/Non-Metal
Ormrod Quarry tiene $44K en multas propuestas de MSHA y $0 pendientes en 1 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Ormrod Quarry.
- Muertes
- 0
- Incidentes totales
- 34
- Años en registro
- 1987–2026
- Último incidente
- May 2026
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.ⓘ
Una orden bajo la Sección 107(a) retira a los mineros de un área cuando un inspector detecta un peligro inminente. Cada orden se levanta una vez corregida la condición, por lo que esto cuenta las órdenes emitidas, no las que están en vigor ahora.Ormrod Quarry tiene $44K en multas propuestas de MSHA y $0 pendientes en 1 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 2 · 100%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| PENN 2010-77M | Settlement | Lesnick | 2011 | $2K → $999 |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2025-10-16
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Nuisance dust, total, <1% Qtz102 en exceso
- Quartz, respirable, >1% Qtz13
- Respirable dust, <.1mg5
- Nuisance dust, respirable, <1% Qtz4
Ver los análisis individuales (51)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2024-04-23 | Nuisance dust, total, <1% Qtz | 15.05 | 10 | 1.51 | Laborer, Bullgang |
| 2024-03-21 | Nuisance dust, total, <1% Qtz | 11.81 | 10 | 1.18 | Laborer, Bullgang |
| 2025-10-16 | Nickel fumes | 0 | 1 | 0.00 | Welder, etc. |
| 2025-10-16 | Molybdenum fumes | 0 | 10 | 0.00 | Welder, etc. |
| 2025-10-16 | Manganese fumes | 0.03 | 5 | 0.01 | Welder, etc. |
| 2025-10-16 | Magnesium oxide fumes | 0.02 | 10 | 0.00 | Welder, etc. |
| 2025-10-16 | Lead fumes | 0 | 150 | 0.00 | Welder, etc. |
| 2025-10-16 | Iron oxide fumes | 0.23 | 10 | 0.02 | Welder, etc. |
| 2025-10-16 | Copper fumes | 0 | 100 | 0.00 | Welder, etc. |
| 2025-10-16 | Cobalt fumes | 0 | 100 | 0.00 | Welder, etc. |
| 2025-10-16 | Chromium, insoluble | 0 | 1 | 0.00 | Welder, etc. |
| 2025-10-16 | Cadmium oxide fumes | 0 | 100 | 0.00 | Welder, etc. |
| 2025-10-16 | Beryllium fumes | 0 | 2 | 0.00 | Welder, etc. |
| 2025-10-16 | Arsenic fumes | 0 | 500 | 0.00 | Welder, etc. |
| 2025-10-16 | Zinc oxide fumes | 0.01 | 5 | 0.00 | Welder, etc. |
| 2025-10-16 | Vanadium fumes | 0 | 50 | 0.00 | Welder, etc. |
| 2025-10-15 | Quartz, respirable, >1% Qtz | 0.95 | 2.56 | 0.37 | Bobcat Operator |
| 2025-10-15 | Quartz, respirable, >1% Qtz | 0.32 | Crusher Oper/Worker | ||
| 2025-10-15 | Quartz, respirable, >1% Qtz | 0.65 | 1.41 | 0.46 | Utility Man |
| 2025-10-15 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2025-09-24 | Nuisance dust, total, <1% Qtz | 0.7 | 10 | 0.07 | Crusher Oper/Worker |
| 2025-09-24 | Nuisance dust, total, <1% Qtz | 1.1 | 10 | 0.11 | Laborer, Bullgang |
| 2025-09-24 | Nuisance dust, total, <1% Qtz | 1.97 | 10 | 0.20 | Laborer, Bullgang |
| 2024-05-14 | Nuisance dust, total, <1% Qtz | 1.5 | 10 | 0.15 | Laborer, Bullgang |
| 2024-03-21 | Nuisance dust, total, <1% Qtz | 3.72 | 10 | 0.37 | Laborer, Bullgang |
| 2024-03-21 | Nuisance dust, total, <1% Qtz | 0.36 | 10 | 0.04 | Crusher Oper/Worker |
| 2024-03-21 | Nuisance dust, total, <1% Qtz | 0.23 | 10 | 0.02 | Utility Man |
| 2024-03-21 | Nuisance dust, total, <1% Qtz | 2.92 | 10 | 0.29 | Laborer, Bullgang |
| 2022-08-09 | Nuisance dust, respirable, <1% Qtz | 0.17 | 10 | 0.02 | Crusher Oper/Worker |
| 2022-08-09 | Quartz, respirable, >1% Qtz | 0.25 | Crusher Oper/Worker | ||
| 2016-12-08 | Nuisance dust, respirable, <1% Qtz | 0.61 | 10 | 0.06 | Crusher Oper/Worker |
| 2016-12-08 | Quartz, respirable, >1% Qtz | 0.53 | 1.62 | 0.33 | Cleanup Man |
| 2016-12-08 | Nuisance dust, respirable, <1% Qtz | 0.47 | 10 | 0.05 | Front-end Loader Operator |
| 2010-11-03 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2010-11-03 | Quartz, respirable, >1% Qtz | 0.2 | 1.78 | 0.11 | Laborer, Bullgang |
| 2010-11-03 | Quartz, respirable, >1% Qtz | 0.57 | 2.2 | 0.26 | Crusher Oper/Worker |
| 2010-11-03 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2006-04-27 | Quartz, respirable, >1% Qtz | 0.38 | 0.92 | 0.41 | Truck Driver |
| 2006-04-27 | Nuisance dust, respirable, <1% Qtz | 1.41 | 10 | 0.14 | Crusher Oper/Worker |
| 2006-04-27 | Quartz, respirable, >1% Qtz | 0.58 | 1.72 | 0.34 | Utility Man |
| 2004-01-29 | Unlisted Particulate, respirable, <1% Qtz | 0.69 | Front-end Loader Operator | ||
| 2004-01-29 | Unlisted Particulate, respirable, <1% Qtz | 0.16 | Mechanic | ||
| 2004-01-29 | Respirable dust, <.1mg | 0 | Utility Man | ||
| 2004-01-29 | Quartz, respirable, >1% Qtz | 0.51 | 2.55 | 0.20 | Mechanic |
| 2004-01-29 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2001-10-31 | Unlisted Particulate, total, <1% Qtz | 0.87 | Truck Driver | ||
| 2001-10-31 | Unlisted Particulate, total, <1% Qtz | 1.84 | Truck Driver | ||
| 2001-08-01 | Unlisted Particulate, respirable, <1% Qtz | 0.15 | Mobile Crane Operator | ||
| 2001-08-01 | Quartz, respirable, >1% Qtz | 0.51 | 2.28 | 0.22 | Truck Driver |
| 2001-08-01 | Quartz, respirable, >1% Qtz | 0.46 | 1.07 | 0.43 | Bulldozer Operator |
| 2001-08-01 | Quartz, respirable, >1% Qtz | 0.25 | 1.86 | 0.13 | Washer Operator |
Ormrod Quarry registró 3.01 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2025.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2025 * | 3.01 | 0.00 | 0.000 |
| 2024 * | 0.00 | 0.00 | 0.000 |
| 2023 * | 13.61 | 0.00 | 0.000 |
| 2022 * | 0.00 | 0.00 | 0.000 |
| 2021 * | 0.00 | 0.00 | 0.000 |
| 2020 * | 4.10 | 4.10 | 0.000 |
| 2019 * | 0.00 | 0.00 | 0.000 |
| 2018 * | 0.00 | 0.00 | 0.000 |
- Eastern Industries Inc 1950 a 2011
- New Enterprise Stone & Lime Co., Inc. 2011 al presente
| Año | Empleados |
|---|---|
| 2026 | 32 |
| 2025 | 29 |
| 2024 | 32 |
| 2023 | 30 |
| 2022 | 40 |
| 2021 | 38 |
| 2020 | 29 |
| 2019 | 29 |
| 2018 | 30 |
| 2017 | 28 |
| 2016 | 27 |
| 2015 | 20 |
| 2014 | 18 |
| 2013 | 18 |
| 2012 | 17 |
| 2011 | 15 |
| 2010 | 13 |
| 2009 | 14 |
| 2008 | 20 |
| 2007 | 20 |
| 2006 | 21 |
| 2005 | 20 |
| 2004 | 20 |
| 2003 | 19 |
| 2002 | 21 |
| 2001 | 22 |
| 2000 | 29 |
Ormrod Quarry se ubica en Lehigh County, Pennsylvania, donde la categoría minera del Censo representa el 0.0% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 16,913 | 0 | 0 | 0.0 |
| 2026 Q1 | 8,397 | 0 | 0 | 0.0 |
| 2025 Q4 | 21,383 | 10 | 3 | 467.7 |
| 2025 Q3 | 18,253 | 2 | 0 | 109.6 |
| 2025 Q2 | 18,750 | 0 | 0 | 0.0 |
| 2025 Q1 | 8,010 | 7 | 1 | 873.9 |
| 2024 Q4 | 16,158 | 0 | 0 | 0.0 |
| 2024 Q3 | 16,783 | 4 | 0 | 238.3 |
Mostrar 97 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 15,870 | 0 | 0 | 0.0 |
| 2024 Q1 | 10,808 | 4 | 1 | 370.1 |
| 2023 Q4 | 16,055 | 0 | 0 | 0.0 |
| 2023 Q3 | 15,760 | 2 | 0 | 126.9 |
| 2023 Q2 | 13,562 | 0 | 0 | 0.0 |
| 2023 Q1 | 13,416 | 0 | 0 | 0.0 |
| 2022 Q4 | 13,532 | 1 | 0 | 73.9 |
| 2022 Q3 | 10,287 | 4 | 2 | 388.8 |
| 2022 Q2 | 11,977 | 0 | 0 | 0.0 |
| 2022 Q1 | 9,522 | 0 | 0 | 0.0 |
| 2021 Q4 | 12,504 | 0 | 0 | 0.0 |
| 2021 Q3 | 13,655 | 0 | 0 | 0.0 |
| 2021 Q2 | 12,408 | 0 | 0 | 0.0 |
| 2021 Q1 | 7,187 | 4 | 2 | 556.6 |
| 2020 Q4 | 12,872 | 0 | 0 | 0.0 |
| 2020 Q3 | 13,724 | 0 | 0 | 0.0 |
| 2020 Q2 | 12,110 | 0 | 0 | 0.0 |
| 2020 Q1 | 10,035 | 0 | 0 | 0.0 |
| 2019 Q4 | 13,668 | 0 | 0 | 0.0 |
| 2019 Q3 | 13,697 | 1 | 1 | 73.0 |
| 2019 Q2 | 14,481 | 0 | 0 | 0.0 |
| 2019 Q1 | 7,262 | 0 | 0 | 0.0 |
| 2018 Q4 | 13,368 | 0 | 0 | 0.0 |
| 2018 Q3 | 14,745 | 0 | 0 | 0.0 |
| 2018 Q2 | 14,616 | 0 | 0 | 0.0 |
| 2018 Q1 | 7,260 | 0 | 0 | 0.0 |
| 2017 Q4 | 14,661 | 1 | 0 | 68.2 |
| 2017 Q3 | 16,799 | 0 | 0 | 0.0 |
| 2017 Q2 | 16,703 | 2 | 0 | 119.7 |
| 2017 Q1 | 7,634 | 0 | 0 | 0.0 |
| 2016 Q4 | 16,519 | 4 | 1 | 242.1 |
| 2016 Q3 | 16,133 | 0 | 0 | 0.0 |
| 2016 Q2 | 16,859 | 1 | 0 | 59.3 |
| 2016 Q1 | 10,903 | 0 | 0 | 0.0 |
| 2015 Q4 | 21,136 | 2 | 0 | 94.6 |
| 2015 Q3 | 13,729 | 2 | 1 | 145.7 |
| 2015 Q2 | 16,113 | 0 | 0 | 0.0 |
| 2015 Q1 | 6,265 | 10 | 7 | 1596.2 |
| 2014 Q4 | 8,652 | 0 | 0 | 0.0 |
| 2014 Q3 | 11,161 | 0 | 0 | 0.0 |
| 2014 Q2 | 10,014 | 3 | 1 | 299.6 |
| 2014 Q1 | 3,290 | 0 | 0 | 0.0 |
| 2013 Q4 | 10,664 | 2 | 1 | 187.5 |
| 2013 Q3 | 10,244 | 0 | 0 | 0.0 |
| 2013 Q2 | 9,687 | 0 | 0 | 0.0 |
| 2013 Q1 | 5,026 | 0 | 0 | 0.0 |
| 2012 Q4 | 8,434 | 2 | 1 | 237.1 |
| 2012 Q3 | 9,881 | 0 | 0 | 0.0 |
| 2012 Q2 | 11,318 | 0 | 0 | 0.0 |
| 2012 Q1 | 3,283 | 0 | 0 | 0.0 |
| 2011 Q4 | 8,248 | 0 | 0 | 0.0 |
| 2011 Q3 | 9,897 | 4 | 2 | 404.2 |
| 2011 Q2 | 8,296 | 0 | 0 | 0.0 |
| 2011 Q1 | 2,306 | 0 | 0 | 0.0 |
| 2010 Q4 | 6,937 | 4 | 1 | 576.6 |
| 2010 Q3 | 7,865 | 5 | 0 | 635.7 |
| 2010 Q2 | 7,843 | 0 | 0 | 0.0 |
| 2010 Q1 | 1,704 | 0 | 0 | 0.0 |
| 2009 Q4 | 7,722 | 0 | 0 | 0.0 |
| 2009 Q3 | 9,084 | 6 | 5 | 660.5 |
| 2009 Q2 | 7,731 | 0 | 0 | 0.0 |
| 2009 Q1 | 2,656 | 0 | 0 | 0.0 |
| 2008 Q4 | 11,691 | 5 | 0 | 427.7 |
| 2008 Q3 | 13,431 | 0 | 0 | 0.0 |
| 2008 Q2 | 11,222 | 0 | 0 | 0.0 |
| 2008 Q1 | 6,047 | 0 | 0 | 0.0 |
| 2007 Q4 | 11,824 | 2 | 0 | 169.1 |
| 2007 Q3 | 14,900 | 0 | 0 | 0.0 |
| 2007 Q2 | 12,926 | 2 | 1 | 154.7 |
| 2007 Q1 | 6,715 | 0 | 0 | 0.0 |
| 2006 Q4 | 14,755 | 3 | 0 | 203.3 |
| 2006 Q3 | 15,196 | 0 | 0 | 0.0 |
| 2006 Q2 | 14,480 | 0 | 0 | 0.0 |
| 2006 Q1 | 9,637 | 0 | 0 | 0.0 |
| 2005 Q4 | 13,945 | 0 | 0 | 0.0 |
| 2005 Q3 | 16,160 | 0 | 0 | 0.0 |
| 2005 Q2 | 13,892 | 0 | 0 | 0.0 |
| 2005 Q1 | 9,243 | 1 | 0 | 108.2 |
| 2004 Q4 | 14,428 | 0 | 0 | 0.0 |
| 2004 Q3 | 13,932 | 2 | 0 | 143.6 |
| 2004 Q2 | 13,559 | 0 | 0 | 0.0 |
| 2004 Q1 | 7,517 | 2 | 0 | 266.1 |
| 2003 Q4 | 13,787 | 0 | 0 | 0.0 |
| 2003 Q3 | 14,096 | 2 | 0 | 141.9 |
| 2003 Q2 | 12,364 | 1 | 1 | 80.9 |
| 2003 Q1 | 5,655 | 0 | 0 | 0.0 |
| 2002 Q4 | 12,074 | 0 | 0 | 0.0 |
| 2002 Q3 | 12,580 | 0 | 0 | 0.0 |
| 2002 Q2 | 11,624 | 0 | 0 | 0.0 |
| 2002 Q1 | 6,234 | 0 | 0 | 0.0 |
| 2001 Q4 | 11,176 | 2 | 0 | 179.0 |
| 2001 Q3 | 13,161 | 2 | 0 | 152.0 |
| 2001 Q2 | 12,876 | 0 | 0 | 0.0 |
| 2001 Q1 | 6,678 | 3 | 0 | 449.2 |
| 2000 Q3 | 12,402 | 0 | 0 | 0.0 |
| 2000 Q2 | 7,868 | 0 | 0 | 0.0 |
| 2000 Q1 | 7,868 | 0 | 0 | 0.0 |
Incidentes reportables
34 en archivo2026 · 1 incidente
2025 · 1 incidente
Laceration to thumb requiring stiches. During LOTOTO, employee stepped into help with project installing v-belts on CV7 conveyor. EE pulled the belt, and it got caught on EE's thumb.
2023 · 4 incidentes
EE was operating a 988K PL0105 wheel loader, digging in the muck shot and sending loads to Primary Crusher. As EE was digging in the muck pile, EE hit a tight spot which caused the loader to jar/jolt, and the EE strained EE's lower back.
EE was installing a right-side, A motor V-Belt guard on a HP400 Crusher. EE hung a 44" X 37", 20lb piece of guard onto the fastener bolts. As EE was lining up the bottom right-side fastener, the guard came unhooked from top left fastener. This caused the guard to swing down and pinch EE's left hand between the guard and angle support, bruising EE's left hand.
Miner was shoveling stone and sand off floor in tunnel and putting it on conveyor belt. After shoveling, EE said had pain in the back of the right shoulder.
EE was washing screen tower walkways with a 1-1/2" rubber water hose. EE finished washing off plant and disconnected hose from water line 1-1/2" camlock couplers. When removing hose fitting from pipe water sprayed out hitting them in the left eye. EE washed the eye but still felt discomfort, was seen by a panel physician and has an abrasion on the cornea and received prescription.
2020 · 1 incidente
EE was walking down a slight incline along the side of a roadway, EE slipped on loose stones and fell forwards onto EE's knees as EE fell, EE caught self with EE's right arm spraining EE's right shoulder and causing a contusion on both knees
2017 · 1 incidente
Employee was operating a Volvo A35D Articulated truck when the truck slid in a tire rut. The operator had right hand on the wheel and left hand on the grab rail. The sudden movement jerked employee's body to the right causing pain in left shoulder.
2015 · 2 incidentes
Employee was loading shot rock when the loader hit a tight area causing the loader to bounce back, straining his lumbar area.
Employee was hitting a ware plate on a dozer blade with a sledge hammer when a sliver of steel chipped off and struck him in the right thigh.
2008 · 1 incidente
Employee was removing a fuel drum from the bed of a pickup truck, when his left upper arm was struck by the drum, causing a tear to the arm muscle.
2004 · 1 incidente
EMPLOYEE STEPPED OFF A BACKHOE & TWISTED HIS LT. ANKLE WHEN HE PLACED IT ON UNEVEN GROUND.
1998 · 4 incidentes
EE S RIGHT HAND WAS CUT WHEN IT CAME INTO CONTACT WITH SHARP METAL EDGE ON BROKEN EQUIPMENT.
THE EMPLOYEE WAS DESCENDING A LOADER. THE EMPLOYEE SLIPPED OFF AND FELL TO THE GROUND INJURING HIS HEAD, LEFT SHOULDER AND BACK.
WHILE CLEANING OUT PRIMARY CRUSHER, EE HAND SLIPPED OFF ROCK CAUSING HIM TO FALL ON ROCK AND FRACTURE HIS RIBS.
EMPLOYEE WAS CLEANING BIG ROCKS FROM THE CATWALK AFTER A SPILLAGE. A ROCK SLIPPED OUT OF HIS HAND AND LANDED ON HIS FOOT BEHIND HIS SAFETY SHOES.
1997 · 1 incidente
INJURY OCCURRED WHEN THE OPERATOR OF THE BACKHOE BACKED INTO THE REAR OF THE BIN TRUCK CAUSING THE TRUCK TO SHAKE AND EE FEL FROM THE TRUCK. (HE SLIPPED OFF THE STEPS ONTO LANDING).
1996 · 2 incidentes
EMPLOYEE WAS CUTTING A FACE PLATE IN #5 SCREEN BY-PASS BIN. STEEL PLATE SPRUNG LOOSE AND CAUGHT EMPLOYEE'S HAND AND WRIST, PUSHING IT AGAINST BACK PLATE.
EE WAS FUELING UP CAT TRUCK. WHILE PULLING FUEL HOSE UP ONTO THE TRUCK, HE SLIPPED & FELL ONTO HIS BACK & SKINNED THE BACK OF HIS HEAD.
1995 · 2 incidentes
WHILE CHANGING A LIGHT BULB THE BULB BROKE & PENETRATED THE LEFT FOREFINGER CAUSING EMPLOYEE TO RECEIVE TWO STITCHES TO CLOSE OUT
EMPLOYEE WAS USING A HAMMER AND A PUNCH.HIS HAND SLIPPED OFF PUNCH AND HIT THUMB WITH HAMMER.
1989 · 4 incidentes
PUTTING STEEL IN BUCKET AND STEEL CAME BACK AND HIT L HAND
EMPLOYEE WAS REMOVING SKIRTING ON #2 BELT & WALKED INTO CROSS-BEAM
RELINING CHUTES.
EMPL WAS HOISTING STEEL WHEN STEEL FELL ON FINGERS
1988 · 8 incidentes
CHANGING SCREENS
LOADING BIN TRUCKS UNDER BINS
PULLING BIN HANDLE TO LOAD BIN TRUCKS.
CHANGING GREASE BARREL.
ADJUSTING BRAKES ON QUARRY TRUCK AND BRAKE FLUID SPRAYED IN BOTH EYES.
MOVING OIL DRUMS WITH HAND TRUCK, SLIPPED AND HIT HAND ON ROCK.
PUTTING TWO RUBBER HOSES TOGETHER AND A BAND OF METAL THAT HOLDS THE END OF HOSES TOGETHER CUT HIS INDEX FINGER OF LEFT HAND.
EMPLOYEE WAS REMOVING CLEVIS (SHACKLE) FROM CRUSHER TUB AFTER CRANE SET IT IN PLACE. WHEN CLEVIS WAS RELEASED, EMPLOYEE DID NOT HAVE FIRM GRIP ON CABLE AND IT RECOILED AND CLEVIS STRUCK UPPER LIP AND RIGHT CHEEK BONE.
1987 · 1 incidente
(NAME) THE YARD3LOADER OPERATOR,WAS PARKED IN THE VICINITY OF THE WASHED SAND PILE.HE WAS GOING TO GREASE HIS CAT 966 LOADER(UNIT #805).AS HE WAS IN THE PROCESS OF COMING DOWN THE METAL LOADER STEPS,HE APPAR9NTLY SLIPPED AND FELL TO THE GROUND ON THE RIGHT SIDE OF THE LOADER TOWARD THE SSTOCKPILE. HE WAS CONSCIOUS AT ALL TIMES AND FELLOW WORKER,(NAME) WHO WAS IN THE PROCESS OF GREA