Pacific Plant Metal/Non-Metal

Employee was holding a lug in the left hand and cutting it with a porta band saw in the right hand. The porta band saw slipped and lacerated the left index finger and slightly cut the long finger. Employee received six sutures and was returned to work full duty, no restrictions, no prescriptions.

While drilling holes for roof bolts and mesh with a jackleg drill, a section of roof fell on two miners. The individual for this report suffered fractures to the tibia, fibula, and 3 vertebrae.

Employee was installing shaft and bearing housing. Mounting bolt was not aligned. Employee used a pry bar to lift the housing in order to reposition the bolt. The employee reached under the housing and the pry bar slipped. Fourth finger was pinched between housing and mounting surface fracturing tip of finger and requiring stitches.

Employees working at the end of the day. Employees wearing full-face PAPRs. Employees noticed fan blades making contact with housing. Employees were on opposite sides of the fan unit. One employee rotated the fan side to find contact areas. Employee on the other side attempted to assist rotation and pinched finger between the pulley and fan belt.

Employee was injured in the track mobile during a collision. *Second submission. Spoke with MSHA help desk 3/16 and had uploading error.

Employee stepped over process line during clean up activities and rolled ankle. Felt they could self treat until 7/20/18 when they requested to see Dr. Evaluation with the Dr. on 7/20/18 discovered non-displaced fracture to distal fibula and placed on restrictions.

Employee was removing liner from ball mill. A pneumatic jack was holding the mill in place. The jack failed and the mill turned 180 degrees. An employee inside the mill was injured from the fall/flying debris.

Employee was pushing a pallet into the bulk sacker and pinched a thumb on the rollers. 8 stitches was placed on the thumb.

Employee stated that while operating a loader in the pit, employee backed into a depression and jarred back. Employee requested medical treatment on 12/04/2017 and was given work restrictions.

The employee stated ee fell as ee was dismounting the truck.

Employee was going down 2 steps, rolled foot/ankle and suffered a fracture to 5th metatarsal.

Maintenance employee was trying to unclog transport pipe, as they were attempting to pressurize pipe, end cap blew off and struck ee in hand.

Employee was working on the Caribs Fall Protection unit for trucks. He reports that he felt a pop to his knee when he stepped over a magnetic gate. Afterwards he reported pain when walking. Employee received restricted duty from initial medical provider.

Employee was tightening bench vise and felt discomfort in his shoulder. Employee delayed medical treatment until 9/18/14.

Employee stepped out of company truck and had discomfort in hip. Employee delayed treatment until 9/11/14. Employee became reportable on 9/22/14 when he received physical therapy.

while working on replacing an arm of the auto package system employee had to kneel on a chain conveyor. when employee moved off the conveyor for break, he felt stiffness in his back. employee did not receive medical attention until 7/10/14 as he thought pain would go away.

Employee was attempting to close a railcar door latch. The latch wouldn't go down to the locking position. Employee then, using heel of his foot, kicked the latch to close completely.On 5/22 employee received x-ray for foot being swolle,diagnosed with inflammation in foot.

Employee went to turn around after picking up tools and felt sharp pain in knee. employee received MRI on May 16th indicating a tear in his meniscus.

Employee was attempting to cut a rubber hose with a utility knife. Employee was cutting towards his body and broke through the hose and his motion caused him to cut his leg with the utility knife. Cut was small and clean, back to work in 2 hours from hospital

Employee was moving 50 lb bags on a pallet when he jammed his wrist. Did not seek medical treatment until 3/14/11 and became reportable when employee went to physical therapy on 3/21/11. Employee stayed at full duty the whole time.

Customer's over the road truck driver was found unconscious near the truck scale.

Maintenance employee was preparing to weld on 6DC9 dust collector. He was carrying a six foot step ladder on his right shoulder and a five-gallon bucket in his left hand. While walking around the dust collector, the employee fell on a maintenance access ladder. Employee suffered a contusion to the right elbow.

Employee reported pain in right shoulder on 9/10/09 but didn't want to seek medical treatment as he though it was something minor. On 9/29/09 employee was attempting to release hand brake on a railcar when he felt a sharp pain in his right shoulder. Employee sent to medical center on 9/30/09 and was diagnosed with sprain in right rotator cuff.

Employee was cutting skaker deck apart to send off for repair. While attempting to remove motor from frame, part of the beam holding the motor would not come loose, as the cuts were not completely through the frame. Employee bent down to grab cutting torch when the weld broke causing the edge of the motor to contact the left side of employee's face.

Employee was wiping up oil from maintenance shop floor, while another employee was stacking three wooden pallets up. While cleaning floor, one pallet fell onto left index finger cutting it.

Feedbox on #5 mill was jammed up with ground silica material. Employee shut down mill and cleaned feedbox out. Employee started mill back up after completing cleaning. Feedbox again jammed up, due to fines from seperator. Air blast occurred splashing product into employee's eyes.

Employee was repositioning a 50lb bag of sand when he stepped on a pallet lift. The lift had a bolt break. The lift fell on the employee's foot. He went to doctor on 5-7-07. Doctor said looks like swelling; come back if anymore problems. Emp. went back during Sept. Doctor said surgery would take care of cyst on 9-10-07.

Employee was going to empty a wheelbarrow of sand, while in the process of pushing the wheelbarrow, the employee stepped over a piece of grating that was bowed. The employee twisted his knee when he stepped on the grating. Employee did not go to doctor until 12/11/06. Employee waited to see if the swelling went down before going to see a doctor.

emp. was attempting to release hand brake on railcar. He grabbed a 3-foot bar and placed to release brake. emp, felt pain in left shoulder. Emp, went to doctor six days later. doctor said no findings, in 04/07 he asked for 2nd opinion. worker's comp and attorney have been disbuting claim. finally a specialist elected to have surgery. 1st day of work missed was 12/3/07

Employee was moving pipe with back hoe equipment, carrying pipe between the knuckle and using the bucket for support. Employee's safety glasses became fogged up due to cold weather. Employee stopped to wipe off glasses when the pipe fell into the water/sand area, which splashed up into employee's eye.

Rail car brakes not working properly.

Two employees were installing a press in the QA Lab, as they were lifting it into place one employee felt a pull in his left hip, resulting in a low back strain. The incident was not reported to management until 03/21/2005.

Lumbar strain occured during normal work activities as a Micron Bagger. This entails lifting and turning with up to 50 lbs. of bagged material.

Injured right wrist doing normal activities of processing whole grain sand samples. Was lifting buckets and splitting the samples down to run screen analysis.

EE WAS ATTEMPTING TO REMOVE A HOIST OPERATED LOADING CHUTE FROM A HOLE OF A RAILCAR. THE CHUTE JAMMED AND THE HOIST TRIPPED ITS OVERLOAD. EE PLACED HAND NEAR CHUTE PIVOT END TO SEE IF CHUTE WA S PLUGGED AND FULL. EE LOST HIS BALANCE AS HE RELEASE THE PIVOT END. THE PIVOT END SWUNG DOWN. SMASHING HIS LEFT FINGER AGAINST THE HOLE OPENING. 12 SUTURES & FRACTURED TIP OF FINGER.

DURING THE NORMAL COURSE OF FILLING AND PALLETIZING FIFTY POUND BAGS, EE SQUATTED DOWN TO REMOVE A BAG FROM THE BAGGING MACHINE AND FELT A PAIN IN HIS LEFT KNEE. AFTER VISITING THE DR, WE FOUN D OUT THE KNEE WAS SPRAINED.

FOOT SLIPPED WHILE DESCENDING LADDER ON RAIL CAR, AND FELL TO PAVEMENT.

WHILE ATTEMPTING O OPEN TOP DOOR OF RAILCAR, EE STRAINED BACK. DOOR MAY HAVE BEEN FROZEN TO CAR.

WHILE CLIMBING LADDER, THE LADDER SLIPPED, THE EMPLOYEE JUMPED TO GROUND, THE LADDER LANDED ON RIGHT FOOT BEHIND THE PROTECTIVE TOE GUARD.

CARRYING PIECE OF ANGLE IRON ON ICY ROAD. SLIPPED AND FELL ONTO BACK. RECIEVED DIAGNOISS OF FRACTURE ON 3-19-01.

MECHANIC KNEELING DOWN TO REMOVE BOLTS FROM PUMP BASE, WHILE DOING SO, FOOT SLIPPED AND HIT KNEE ON 4" PIPE.

WHILE PREPARING CAR TO BE LOADED, HE STRAINED BACK TRYING TO OPEN LONG GRAIN DOOR--SPRING LOADED. STANDING ON CENTER LATCH CONTRIBUTED.

WHILE UNPLUGGING FEED BOX OF #6 MILL, ROD CAUGHT ON FEED AUGER SMASHING FINGER AGAINST FEED BOX. EE WAS TREATED FOR CONTUSION AND PARTIALLY REMOVED FINGERNAIL. DOCTOR CLEANED AREA AND OPTED TO SUTURE FINGERNAIL INTO PLACE. BANDAGED.

WHILE OPERATING WET/DRY PROCESS, AN UPSET OCCURRED. EE NOTICED THE SCREEN DECK WATER BACKING UP AND WENT TO CONTROL ROOM. ON HIS WAY HE TRIPPED AND FELL INTO HANDRAIL. HIS HARD HAT APPARENTLY CAME OFF DURING FALL. HIS HEAD STRUCK HANDRAIL CUTTING HIS SCALP.

EE WAS CLEANING A PROCESS UPSET BY HAMMERING ON THE CHUTE ATTACHED TO THE EQUIPEMENT. TO DO THIS REQUIRED HIM TO PULL HIMSELF UP TO THAT LEVEL. WHILE HAMMERING ON THE CHUTE, HE LOST HIS BALAN CE. WHEN HE GRABBED TO CATCH HIMSELF, HE FELT A PULL IN HIS UPPER BACK. THE PAIN WAS LIMITED TO UPPER BACK.

EMPLOYEE WAS CLEANING UP AROUND HIS DEPARTMENT. CLEANUP CONSISTED OF SHOVELING SAND INTO WHEELBARROW AND TRANSPORTING IT TO DUMP SITE. WHILE PUSHING LOADED WHEELBARROW, EMPLOYEE FELT PAIN IN R IGHT CALF MUSCLE.

EE WAS PULLING MOTOR FROM #5 MILL, HAD THE MTOR ON CHAIN HOIST AND STARTED TO TURN IT TO THE RIGHT. SHAFT HUNG UP AND GUARD WAS TRYING TO GETIT UNHUNG WHEN LEFT SHOULDER POPPED.

EE WAS INSTALLING PUMP ASSEMBLY ON 3 RELAY, USING A BAR TO HELP LINE UP THE ASSEMBLY WHEN HE FELT A PULL IN HIS LOWER BACK.

EE WAS BAGGING 15 MICRON AND WHEN HE GRABBED A BAG AND PICKED IT UP TO STACK IT AND HURT HIS LOWER BACK.

EMP WAS REMOVING DOOR ON #6 MILL. DOOR ANGLE BROKE ALLOWING A WEDGE TO FLY OUT AND STRIKE EMP IN FOREHEAD.

EE WAS SLOADING A TRUCK FROM A #1 SILO. HE WAS PULLING ON THE HOLE/CHUTE COVER UP WHEN HE FELT A PULL IN THE LEFT SIDE OF HIS NECK

EE WAS IN THE PROCESS OF PLACING A 50 LB BAG OF CALCIUM CLORIDE ON THE GROUND WHEN HIS FOOT SLIPPED ON THE ICE AND FELT A PAIN IN THE GROIN AREA.

EMP WAS REMOVING AN OLD GUARD ON #3 BELT. HE HAD HIS LEFT FOOT ON A MOTOR AND RIGHT FOOT ON BUSWAY. WHEN REMOVING GUARD WHICH WAS STUCK HE FELT A SHARP PAIN IN LOWER BACK AND RIGHT HIP.

EMP WAS CLOSING GRAIN CAR DOOR ON TOP OF BN RAILCAR. HOOK ON SAFETY BELT CAUGHT ON DOOR AS HE WAS CLOSING DOOR AND JERKED HIM DOWN ON TOP OF CAR

EE SAFETY BELT CAUGHT ON TOP OF RAILCAR. HE TURNED AND TRIPPED ON THE CAR DOOR. HE FELL ON TOP OF THE DOOR.

EE WAS WASHING OUT A FEEDER. AS TURNING THE ROTOR IT BROKE FREE CAUSING RIGHT WRIST TO STRIKE EDGE.

THE FILING OF THIS REPORT IS NOT TO BE CONSTRUEDAS AN ADMISSION BY THE COMPANY THAT AN OCCUPATIONAL RESPIRATORY DISEASE OR ILLNESS HAS OCCURRED.

EE WAS CHANGING PUMP ASSEMBLY USING ONLY LIFT AND CARRY METHODS. THE ASSEMBLY PINCHED THE EE'S RT HAND WHILE BEING SET IN THE PUMP.

EMPLOYEE WAS IN QUARRY CHECKING PUMPS. STEPPED ON A PALLET AT END OF WALKWAY. PALLET FLIPPED UP CAUSING HIM TO FALL STRIKING CHEST ON 12" PLASTIC LINE.

EMPLOYEE WAS CLOSING THE BOTTOM DOOR ON A RAIL CAR. THE DOOR WAS HARD TO CLOSE AND HE WAS USING A LONG TRACK BAR TO PULL THE DOOR CLOSED. WHILE PULLING ON THE BAR, HE FELT A PULL IN HIS LOWER BACK.

EMPLOYEE WAS USING A NAIL PULLER TO REMOVE NAILS FROM SIGN BOARDS. NAILS WERE AT HEAD HEIGHT. NAIL HEAD BROKE OFF AND PULLER STRUCK EMPLOYEE IN UPPER LIP.

EE WAS COMING DOWN STAIRS IN MINUSIL DEPARTMENT & SLIPPED ON STEPS, HE CAUGHT HIMSELF ON HANDRAIL WITH UPPER ARM.

EMPLOYEE WAS TAKING A LOAD OF GROUND SAND TO THE DUMP SITE, WHEN HE ROLLED THE WHEELBARROW OVER A BOARD, CAUSING THE END OF THE BOARD TO FLIP UP. EMPLOYEE TRIPPED OVER THE BOARD, FALLING INT O THE WHEELBARROW, STRIKING HIS CHEST AGAINST THE WHEELBARROW HANDLE.

EE KNEELED DOWN TO LOAD GREASE CARTRIDGES AND FELT A PULL IN HIS RIGHT KNEE WHEN HE GOT UP. HE WAS SENT TO DR, RELEASED AND RETURNED TO WORK, SAME DAY. EE WAS SENT TO DR AGAIN ON 8-4, FOR CONT INUING PAIN, SENT TO SPECIALIST 8-19 HAD MRI TEST 8-23, DR PRESCRIBED PHYSICAL THERAPY, BEGINNING 9-7, RESTRICTED DUTY UNTIL RELEASE FROM DR.

ON NOV. 9, 1993 EMPLOYEE WAS PULLING ELECTRICAL HOSES & CORDS OUT OF MUD WHICH CAUSED MINOR PAIN. ON NOV. 03, HE COMPLAONED THAT PAIN HAD INCREASED @ WHICH TIME HE WAS SENT TO CO. DR. FOR EVA LUATION. EMPLOYEE WAS DIAGNOSED WITH BURSITIS BOTH SHOULDERS BUT NOT TREATED FOR CONDITION. UPON RETURN VISIT TO CO. DR. DEC 08, PHYSICAL THERAPY WAS PRESCRIBED.

EMPLOYEE WAS WALKING DOWN A WET, CLAY-COVERED BANK TOWARD THE FLOATING BARGE IN THE PLANT QUARRY. HE WAS CARRYING A BUCKET OF TOOLS WITH WHICH TO WORK ON A MOTOR. HE SLIPPED ON THE WET CLAY, F ALLING TO THE GROUND, WITH HIS LEG "SPLIT".

EMPLOYEE WAS WORKING IN THE ELEVATOR PIT, CLIMBED OUT TO GET A SHOVEL AND STRUCK HIS HARD HAT ON A STEEL BEAM ABOVE HIS HEAD.

EE WAS TIGHTENING THE BRAKE ON A RAILCAR BY TURNING THE BRAKE WHEEL HIS RIGHT HAND SLIPPED OFF THE BRAKE WHEEL STRIKING AGAINST A STEEL SUPPORT DIRECTLY BEHIND THE BRAKE WHEEL CAUSING A STRAIN TO HIS RIGHT WRIST.

55061S DESCENDING A LADDER WHEN HIS FOOT SLIPPED OFF A LADDER RUNG. AND HIS RIGHT ELBOW HIT A PLATFORM EDGE. EE WAS CARRYING A GREASE GUN IN HIS LEFT HAND.

EMPLOYEE WAS CONTROLLING A RAILCAR BEING TAKEN ACROSS THE HIGHWAY TO THE RAILCAR DROP SITE. A LOADED CAR WAS ON THE TRACK, EMPLOYEE DID NOT SEE THE CAR, AND THE TWO CARS COLLIDED, CAUSING A JO LT TO THE EMPLOYEE. HE SAW COMPANY DOCTOR FOR BACK PAIN ON 3-12-92, WAS PUT ON LIGHT DUTY; HE SAW DOCTOR AGAINS ON 3-19, WAS RELEASED FROM LIGHT DUTY AND SENT FOR TREATMENT BY PHYS. THERAPY.

EMPL TAKING LOADED RAIL CARS ACROSS HWY WHEN PICKUP TRUCK COMING DOWN THE HWY STRUCK THE RAILCAR,CAUSING HIM TO BUMP LEGS AND HEAD.

EMPL ADJUSTING FEED ON #2 ALPINE IN A SQUATTING POSITION,WHEN HE STOOD UPRIGHT FELT PAIN IN RIGHT KNEE.

HYDRAULIC WALKWAY UP PUT R FOOT ON TOP EDGE TURNED TOO FAST CAUGHT FOOT KNEE STRUCK ON EDGE OF WALK WAY

LOADING A CAR WITH BULK SAND SET HAND BRAKE ON END OF CAR, STEPPED DOWN FROM CAR L FOOT HIT GROUND TURNED ANKLE

EMPLOYEE WAS SQUATTING DOWN INA TYPICAL MANNER AND COMPLAINED OF PAIN UPON TRYING TO RESUME AN ERECT STANDING POSITION. THE EMPLOYEE HAD DISCOMFORT PRIOR TO THE INCIDENT. HE WAS FAVORING THE LEFT KNEE WHEN THE RIGHT KNEE POPPED.

OCC RESPIRATORY DISEASE

EMPL WAS WALKING ON BLACKTOP BETWEEN RAW SAND TANK & MILLROOM WHEN HE SLIPPED & FELL ON ICY SURFACE OF BLACKTOP.

EMPLOYEE WAS HELPING ROLAND'S ROAD SERVICE MECHANICS REPAIR THE TRACK ON A KOMATSU BULLDOZER.THE SERVICE MECHANICS WERE DRIVING A CENTER PIN THROUGH THE TRACK TO FASTEN THE TRACK,WITH A SLEDGE HAMMER WHEN A PIECE OF METAL SHEARED FROM THE PIN AND STRUCK THE EMPLOYEE ON HIS LEFT LEG BELOW THE KNEE CAP.THE METAL PUNCTURED AND STUCK IN EMPLOYEES LEG.

FILING OF REPORT CONSTRUED NOTOT BE ADMISS OF OCC RESPR DISEASE ILLNESS OCC

THE FILING OF THIS REPORT IS NOT TO BE CONSTRUED AS AN ADMISSION BY THE COMPANY THAT AN OCCUPATIONAL RESPRIATORY DISEASE OR ILLNESS HAS OCCURRED.

EMPLOYEE WAS USING WIRE BRUSH PREPARING STEEL FOR PAINTING. STRUCK FINGER ON SHARP EDGE OF STEEL THAT WAS NOT GROUND OFF. CUT INDEX FIGNER OF RIGHT HAND.

EMPLOYEE WAS REPLACING LINING ON FEEDBOX WAS HANDED OLD LINING,TURNED TO WALK AWAY AND WALKED INTO THE LID WHICH HAD BEEN SWUNG OVER WALKWAY AT EYE LEVEL.STRUCK HIS SAFETY GLASSES DRIVING THEM INTO HIS NOSE.

EMPL WAS DISLODGING BOULDERS IN CRUSHER HOPPER WITH PRY BAR & PULLED MUSCLE IN SHOULDER.

EMPL WAS GOING UP STAIRS IN BULK LOADING FACILITY WHEN HE TRIPPED UP STAIRS. HE FELL FORWARD & STRUCK RIGHT ARM ON SIDE OF STAIRS.

EMPLOYEE WAS BACKING UP WITH TEREX FRONT END LOADER, FROM HIGHWALL WITH A BUCKET OF SAND, WHEN A BOULDER FELL FROM HIGHWALL IN THE BUCKET AND RAISED THE REAR END OF TEREX OFF THE GROUND. EMPL OYEE WAS SHOOK UP FROM THE JAR.

EMPL WAS CLEANING UP SAND AT TOE OF HIGHWALL WITH TEREX FRONT END LOADER & AS HE WAS DIGGING SLIDE OF MATERIAL FROM HIGHWALL FELL ON BUCKET & JARRED LOADER TOSSING EMPL AGAINST STEERING WHEEL OF LOADER.

I.NAME WAS INSTALLING A LIGHT BULB IN THE DOME OF THE TEREX, WHEN THE BULB BROKE AND A PIECE OF FILAMENT PUNCTURED HIS LEFT INDEX FINGER.

HE WAS PULLING ON ROPE TO OPEN THE LOADING CHUTE FROM #2 SILO. THE CLEVIS PIN CAME LOOSE, CAUSING THE ROPE AND PULLEY TO SUDDENLY COME FREE. HE FELL BACKWARDS OFF THE RAIL CAR.

EMPLOYEE WAS INSTALLING THE ROTOR SHAFT IN THE ROTOR OF THE ALPINE MILL WHEN THE SHAFT SLIPPED AGAINST THE ROTOR AND PINCHED THE PALM OF HIS RIGHT HAND REQUIRING 4 SUSTRES.

AS EMPLOYEE REMOVED A BAG FROM THE BAGGER HE TURNED WITH TH LOADED BAG AND HEARD HIS BACK POP

EMPLOYEES FOOT SLIPPED IN WET MICRON MATERIAL ON CONCRETE FLOOR, WHILE BAGGING AND PALLETIZING 50 LB. BAGS. HE HAD A BAG IN HIS HANDS AND WAS TWISTING TO PLACE THE BAG ON A PALLET WHEN HIS FOO T SLIPPED AND JERKED HIS BACK.

HE WAS LIFTING BAG TO TOP OF PALLET WHEN HE FELT PAIN IN STOMACH.

EMPLOYEE WAS CHANGING FILTER ON TEREX

I.NAME WAS SITTING ON TAILINGS RETURN CHUTE TAKING TOPS & COVERS OFF & HAD TO PULL HIMSELF UP NUMEROUS TIMES PUTTING ALOT OF PRESSURE & STRIN ON RT LEG & HIP DUE TO ANGLE OF ROOF & TAIL.INGS CHUTE

EMPL WALKING DOWN STEPS WHEN HE FELT SOMETHING HIT HIM IN THE RIGHT EYE.

EMPLOYEE WAS SENT TO CLEAN UP WASTE MATERIAL AND ICE OFF THE BASEMENT FLOOR OF CRUSHER. HE WAS WALKING ACROSS THE ICE, WHEN HE SLIPPED AND FELL ON HIS LEFT ARM AND WRIST.

I NAME AND I NAME WERE WORKING ON THE DRYER SCREEN WITH WIRE BUFFING WHEEL A WIRE CAME OFF THE WHEEL AND WENT THROUGH HIS SHIRT AND INTO HIS ABODOMEN I NAME HAS A PIECE OF WIRE IN OUTER TIS TISSUE OF HIS ABODOMEN

EMP WAS WALKING INTO UNDERGROUND ON ROADWAY WHEN HE SAID HE SLIPPED AND FELL ON THE ICE

EMPLOYEE WAS ASSIGNED TO REPLACE THE LAGGING ON THE MINUSIL ELEVATOR HEAD PULLEY THE PULLEY WAS IN THE SHOP ON THE FLOOR OF THE WEST TRUCK BAY EMPLOYEE WAS USING A 2 1/2 LB HAMMER & A PIECE O F KEY STOCK TO REMOVE THE OLD LAGGING BY DRIVING IT OUT ONE SIDE EMPLOYEE SWUNG THE HAMMER MISSED THE KEY STOCK AND HIT HIS HAND

EMPL CLEANING UP UNDER SCREEN.HE KNEW X-BRACE WAS THERE BUT FORGOT ABOUT IT.EMPL WALKED INTO X-BRACE BREAKING SKIN ABOVE HIS LEFT EYE.

EMPLOYEE WAS THROWING #50 BAGS ON PALLET AND FELT SOMETHING PULL IN HIS BACK. EMPLOYEE HAD BEEN BAGGING FOR APPROXIMATELY 20 MIN. SINCE HIS BREAK. EMPLOYEE WAS BENDING OVER IN A TWISTED OVER IN A TWISTED POSITION. EMPLOYEE WAS TIRED. 4SA HAD RECENTLY BEEN REVIEW EMPLOYEE IS FAMILIAR WITH PROPER LIFTING PROCEDURES EMPLOYEE SUFFERED LOWER BACK STRAIN.

EMPLOYEE WAS USING A IMPACT WRENCH TO LOOSEN A NUT ON A BOLT IN THE HAMMER MILL DOOR & TOM LINGO WAS USING A BOX END WRENCH TO HOLD THE HEAD OF THE BOLT THE NUT WAS ON. THE BOX END WRENCH SLIP PPED OFF THE HEAD OF THE BOLT, STRUCK EMPLOYEE IN THE MOUTH BROKE OFF A PIECE OF HIS FRONT TOOTH.

EMPLOYEE WAS OPENING THE SLIDE DOOR ON THE BOTTOM OF A RAIL CAR WITH A SHORT BAR. HE WAS JERKING THE BAR WHEN IT SLIPPED AND HIS RIGHT HAND WITH THE BAR IN IT, HIT HIS LEFT HAND

EMPLOYEE WAS REPAIRING 4IN VALVE FOR FULLER PUMP WHEN HE PICKED IT UP TO PUT ON WORK BENCH HE FELT PAIN IN HIS BACK

EE WAS ATTEMPTING TO LOOSEN BRIDGE SAND FROM THE DISCHARGE END OF THE FLUID BED DRYER WITH A HOE THRU THE INSPECTION DOOR WHILE VESSEL WAS PRESSURRIZED & FORCING HOT SAND THRU THE DOOR. THE H OT SAND FROM WITHIN THE FLUID BED DRYER CONTACTED HIS LEFT FROEARM & HAND BURNING SKIN.

REMOVING TOP DOOR ON #8 MILLS SEPERATOR-STRAINED MUSCLE IN LEFT SHOULDER.

EMPLOYEE WAS CUTTING WEEDS IN QUARRY THE NEXT DAY HE CAME IN WITH A RASH ON HIS ARMS AND STOMACH EMPLOYEE DID CUT POISON IVY OR POISON OAK WHILE HE WAS CUTTING WEEDS HE MUST HAVE BEEN EXPOSED TO SOME POISON IVY OR POISON OAK