Smoke was reported in the developed underground space at 3:21am. The fire department responded but was unable to locate the source, although it was thought to be in the developed underground area. No miners were working underground. Mine management and Buckley Powder discovered the burned truck at approximately 8:30am and MSHA was notified at 8:36am.
PLANT NO 1 MINE & MILL: 212 citaciones de la MSHA Metal/Non-Metal
PLANT NO 1 MINE & MILL tiene $27K en multas propuestas de MSHA y $0 pendientes en 13 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en PLANT NO 1 MINE & MILL.
- Muertes
- 0
- Incidentes totales
- 38
- Años en registro
- 1984–2015
- Último incidente
- Feb 2015
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.PLANT NO 1 MINE & MILL tiene $27K en multas propuestas de MSHA y $0 pendientes en 13 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 8 · 89%
- Anuladas o retiradas 1 · 11%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| CENT 2011-355M | Settlement | Lesnick | 2011 | $2K → $512 |
| CENT20010254M | Settlement | Barbour | 2001 | $2K → $1K |
| CENT20010318M | Settlement | Barbour | 2001 | $2K → $2K |
| CENT20010255M | Settlement | Barbour | 2001 | $1K → $1K |
| CENT20020079M | Settlement | Barbour | 2002 | $1K → $1K |
| CENT 2010-10M | Settlement | Lesnick | 2010 | $1K → $1K |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2015-02-25, hace 11 años
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Diesel particulate (total carbon)111 en exceso
- TCarbon @ 350101 en exceso
- Diesel Particulate Material61 en exceso
- Nuisance dust, total, <1% Qtz31 en exceso
Ver los análisis individuales (100)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2013-01-24 | Nuisance dust, total, <1% Qtz | 12.14 | 10 | 1.21 | Utility Man |
| 2012-04-18 | TC @ 160 | 170 | 160 | 1.06 | Truck Driver |
| 2007-01-25 | TCarbon @ 350 | 441.41 | 350 | 1.26 | Truck Driver |
| 2006-01-12 | Diesel Particulate Material | 350.96 | 308 | 1.14 | Ground Control/Timberman |
| 2015-02-25 | Nuisance dust, respirable, <1% Qtz | 0.36 | 10 | 0.04 | Crusher Oper/Worker |
| 2015-02-25 | Nuisance dust, respirable, <1% Qtz | 0.44 | 10 | 0.04 | Truck Driver |
| 2015-02-25 | Nuisance dust, respirable, <1% Qtz | 0.38 | 10 | 0.04 | Truck Driver |
| 2015-02-25 | Nuisance dust, respirable, <1% Qtz | 0.77 | 10 | 0.08 | Truck Driver |
| 2015-02-25 | Nuisance dust, respirable, <1% Qtz | 0.18 | 10 | 0.02 | Front-end Loader Operator |
| 2013-03-20 | Nuisance dust, total, <1% Qtz | 1.21 | 10 | 0.12 | Utility Man |
| 2013-01-24 | Nuisance dust, total, <1% Qtz | 0 | 10 | 0.00 | Front-end Loader Operator |
| 2012-10-25 | TC @ 160 | 91 | 160 | 0.57 | Drill Operator, Jumbo Perc. |
| 2012-10-25 | EC @ 160 | 46 | 160 | 0.29 | Scaling (mechanical) |
| 2012-10-25 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2012-10-25 | TC @ 160 | 99 | 160 | 0.62 | Scaling (mechanical) |
| 2012-10-25 | EC @ 160 | 82 | 160 | 0.51 | Scaling (mechanical) |
| 2012-10-25 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2012-10-25 | TC from EC @ 160 | 0 | 160 | 0.00 | Drill Operator, Jumbo Perc. |
| 2012-10-25 | EC @ 160 | 74 | 160 | 0.46 | Drill Operator, Jumbo Perc. |
| 2012-10-25 | TC @ 160 | 51 | 160 | 0.32 | Scaling (mechanical) |
| 2012-04-18 | EC @ 160 | 29 | 160 | 0.18 | Truck Driver |
| 2012-04-18 | EC @ 160 | 40 | 160 | 0.25 | Truck Driver |
| 2012-04-18 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2012-04-18 | TC @ 160 | 117 | 160 | 0.73 | Truck Driver |
| 2012-04-18 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2012-04-18 | TC @ 160 | 53 | 160 | 0.33 | Front-end Loader Operator |
| 2012-04-18 | EC @ 160 | 46 | 160 | 0.29 | Front-end Loader Operator |
| 2012-04-18 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2012-01-11 | Nuisance dust, respirable, <1% Qtz | 0.13 | 10 | 0.01 | Scaling (mechanical) |
| 2012-01-11 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2012-01-11 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2012-01-11 | Nuisance dust, respirable, <1% Qtz | 0.15 | 10 | 0.02 | Crusher Oper/Worker |
| 2011-08-18 | Nuisance dust, respirable, <1% Qtz | 0.31 | 10 | 0.03 | Bobcat Operator |
| 2011-08-18 | Nuisance dust, respirable, <1% Qtz | 0.17 | 10 | 0.02 | Cleanup Man |
| 2011-05-25 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2011-05-25 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2011-01-26 | EC @ 160 | 16 | 160 | 0.10 | Crusher Oper/Worker |
| 2011-01-26 | TC @ 160 | 23 | 160 | 0.14 | Crusher Oper/Worker |
| 2011-01-26 | TC from EC @ 160 | 0 | 160 | 0.00 | Crusher Oper/Worker |
| 2011-01-26 | TC @ 160 | 40 | 160 | 0.25 | Front-end Loader Operator |
| 2011-01-26 | EC @ 160 | 33 | 160 | 0.21 | Front-end Loader Operator |
| 2011-01-26 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2010-12-01 | Nuisance dust, respirable, <1% Qtz | 0.62 | 10 | 0.06 | Truck Driver |
| 2010-12-01 | Nuisance dust, respirable, <1% Qtz | 0.21 | 10 | 0.02 | Utility Man |
| 2010-12-01 | Nuisance dust, respirable, <1% Qtz | 0.78 | 10 | 0.08 | Truck Driver |
| 2010-12-01 | Nuisance dust, respirable, <1% Qtz | 0.16 | 10 | 0.02 | Front-end Loader Operator |
| 2010-04-21 | Quartz, respirable, >1% Qtz | 0.33 | 2.36 | 0.14 | Utility Man |
| 2010-04-21 | Quartz, respirable, >1% Qtz | 0.42 | 2.9 | 0.14 | Truck Driver |
| 2010-04-21 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2010-01-06 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2010-01-06 | EC @ 160 | 13 | 160 | 0.08 | Utility Man |
| 2010-01-06 | TC from EC @ 160 | 0 | 160 | 0.00 | Utility Man |
| 2010-01-06 | TC @ 160 | 24 | 160 | 0.15 | Utility Man |
| 2010-01-06 | TC @ 160 | 13 | 160 | 0.08 | Front-end Loader Operator |
| 2010-01-06 | EC @ 160 | 11 | 160 | 0.07 | Front-end Loader Operator |
| 2009-10-15 | Nuisance dust, respirable, <1% Qtz | 0.41 | 10 | 0.04 | Rotary Bucket Ex. Operator |
| 2009-10-15 | Nuisance dust, respirable, <1% Qtz | 0.14 | 10 | 0.01 | Front-end Loader Operator |
| 2009-09-01 | Nuisance dust, respirable, <1% Qtz | 0.24 | 10 | 0.02 | Utility Man |
| 2009-09-01 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2009-09-01 | Nuisance dust, respirable, <1% Qtz | 0.45 | 10 | 0.05 | Truck Driver |
| 2009-09-01 | Quartz, respirable, >1% Qtz | 0.21 | 2.04 | 0.10 | Truck Driver |
| 2008-08-06 | TC @ 160 | 57 | 160 | 0.36 | Scaling (mechanical) |
| 2008-08-06 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2008-08-06 | EC @ 160 | 33 | 160 | 0.21 | Scaling (mechanical) |
| 2008-04-10 | Nuisance dust, respirable, <1% Qtz | 0.2 | 10 | 0.02 | Crusher Oper/Worker |
| 2008-04-10 | Quartz, respirable, >1% Qtz | 0.36 | 0.79 | 0.46 | Dry Screen Plant Operator |
| 2008-01-24 | TCarbon @ 350 | 100.5 | 350 | 0.29 | Blaster, Powder Gang |
| 2008-01-24 | TC as EC @ 350 | 67.89 | 350 | 0.19 | Blaster, Powder Gang |
| 2008-01-24 | TCarbon @ 350 | 141.88 | 350 | 0.41 | Scaling (hand) |
| 2008-01-24 | TC as EC @ 350 | 87.1 | 350 | 0.25 | Scaling (hand) |
| 2008-01-24 | TCarbon @ 350 | 0 | 350 | 0.00 | Crusher Oper/Worker |
| 2008-01-24 | TC as EC @ 350 | 16.65 | 350 | 0.05 | Crusher Oper/Worker |
| 2007-07-18 | TC as EC @ 350 | 25.62 | 350 | 0.07 | Truck Driver |
| 2007-07-18 | TC as EC @ 350 | 16.65 | 350 | 0.05 | Front-end Loader Operator |
| 2007-07-18 | TCarbon @ 350 | 46.31 | 350 | 0.13 | Front-end Loader Operator |
| 2007-07-18 | TCarbon @ 350 | 56.16 | 350 | 0.16 | Truck Driver |
| 2007-07-18 | TC as EC @ 350 | 60.2 | 350 | 0.17 | Crusher Oper/Worker |
| 2007-07-18 | TCarbon @ 350 | 337.96 | 350 | 0.97 | Crusher Oper/Worker |
| 2007-04-12 | Nuisance dust, respirable, <1% Qtz | 0.26 | 10 | 0.03 | Utility Man |
| 2007-04-12 | Quartz, respirable, >1% Qtz | 0.57 | 1.99 | 0.29 | Dry Screen Plant Operator |
| 2007-04-12 | Quartz, respirable, >1% Qtz | 0.37 | 2.32 | 0.16 | Truck Driver |
| 2007-01-25 | TCarbon @ 350 | 96.56 | 350 | 0.28 | Truck Driver |
| 2007-01-25 | TC as EC @ 350 | 69.17 | 350 | 0.20 | Truck Driver |
| 2007-01-25 | TC as EC @ 350 | 133.21 | 350 | 0.38 | Truck Driver |
| 2007-01-25 | TC as EC @ 350 | 93.5 | 350 | 0.27 | Front-end Loader Operator |
| 2007-01-25 | TCarbon @ 350 | 118.24 | 350 | 0.34 | Front-end Loader Operator |
| 2007-01-25 | TCarbon @ 350 | 335.99 | 350 | 0.96 | Truck Driver |
| 2007-01-25 | TC as EC @ 350 | 130.65 | 350 | 0.37 | Truck Driver |
| 2006-04-20 | Nuisance dust, respirable, <1% Qtz | 0.19 | 10 | 0.02 | Crusher Oper/Worker |
| 2006-04-20 | Quartz, respirable, >1% Qtz | 0.4 | 2.62 | 0.15 | Truck Loader |
| 2006-04-20 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2006-03-09 | Diesel Particulate Material | 83.55 | 308 | 0.27 | Ground Control/Timberman |
| 2006-01-12 | Diesel Particulate Material | 84.05 | 308 | 0.27 | Blaster, Powder Gang |
| 2006-01-12 | Diesel Particulate Material | 249.08 | 308 | 0.81 | Front-end Loader Operator |
| 2006-01-12 | Diesel Particulate Material | 119.61 | 308 | 0.39 | Truck Driver |
| 2006-01-12 | Diesel Particulate Material | 140.21 | 308 | 0.46 | Crusher Oper/Worker |
| 2005-04-06 | Total Carbon,TC | 86.11 | 400 | 0.22 | Blaster, Powder Gang |
| 2005-04-06 | Total Carbon,TC | 62.47 | 400 | 0.16 | Truck Driver |
| 2005-04-06 | Total Carbon,calculated from elemental carbon. | 16.65 | 400 | 0.04 | Truck Driver |
| 2005-04-06 | Total Carbon,TC | 173.21 | 400 | 0.43 | Crusher Oper/Worker |
PLANT NO 1 MINE & MILL registró 9.27 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2013.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2013 * | 9.27 | 9.27 | 0.000 |
| 2012 * | 0.00 | 0.00 | 0.000 |
| 2011 * | 8.71 | 8.71 | 0.000 |
| 2010 * | 8.12 | 0.00 | 0.000 |
| 2009 * | 14.54 | 7.27 | 0.000 |
| 2008 * | 0.00 | 0.00 | 0.000 |
| 2007 * | 6.07 | 6.07 | 0.000 |
| 2006 * | 0.00 | 0.00 | 0.000 |
- Springfield Underground Inc 1950 al presente
| Año | Empleados |
|---|---|
| 2015 | 10 |
| 2014 | 10 |
| 2013 | 11 |
| 2012 | 12 |
| 2011 | 14 |
| 2010 | 14 |
| 2009 | 17 |
| 2008 | 17 |
| 2007 | 18 |
| 2006 | 22 |
| 2005 | 21 |
| 2004 | 19 |
| 2003 | 20 |
| 2002 | 20 |
| 2001 | 23 |
| 2000 | 24 |
PLANT NO 1 MINE & MILL se ubica en Greene County, Missouri, donde la categoría minera del Censo representa el 0.1% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2015 Q3 | 4,347 | 3 | 0 | 690.1 |
| 2015 Q2 | 4,418 | 1 | 0 | 226.3 |
| 2015 Q1 | 4,026 | 3 | 0 | 745.2 |
| 2014 Q4 | 5,101 | 3 | 1 | 588.1 |
| 2014 Q3 | 4,362 | 2 | 0 | 458.5 |
| 2014 Q2 | 4,294 | 3 | 0 | 698.6 |
| 2014 Q1 | 4,548 | 1 | 0 | 219.9 |
| 2013 Q4 | 7,065 | 1 | 0 | 141.5 |
Mostrar 55 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2013 Q3 | 4,776 | 1 | 0 | 209.4 |
| 2013 Q2 | 5,101 | 2 | 0 | 392.1 |
| 2013 Q1 | 4,644 | 3 | 1 | 646.0 |
| 2012 Q4 | 5,215 | 1 | 0 | 191.8 |
| 2012 Q3 | 5,321 | 1 | 0 | 187.9 |
| 2012 Q2 | 4,843 | 2 | 0 | 413.0 |
| 2012 Q1 | 5,124 | 2 | 0 | 390.3 |
| 2011 Q4 | 5,636 | 6 | 1 | 1064.6 |
| 2011 Q3 | 5,566 | 3 | 0 | 539.0 |
| 2011 Q2 | 5,944 | 2 | 0 | 336.5 |
| 2011 Q1 | 5,826 | 1 | 0 | 171.6 |
| 2010 Q4 | 6,058 | 4 | 0 | 660.3 |
| 2010 Q3 | 6,434 | 2 | 0 | 310.8 |
| 2010 Q2 | 6,286 | 2 | 0 | 318.2 |
| 2010 Q1 | 5,867 | 6 | 2 | 1022.7 |
| 2009 Q4 | 6,135 | 5 | 0 | 815.0 |
| 2009 Q3 | 6,970 | 4 | 3 | 573.9 |
| 2009 Q2 | 6,889 | 4 | 2 | 580.6 |
| 2009 Q1 | 7,512 | 5 | 1 | 665.6 |
| 2008 Q4 | 7,861 | 5 | 1 | 636.1 |
| 2008 Q3 | 8,202 | 3 | 0 | 365.8 |
| 2008 Q2 | 8,241 | 5 | 0 | 606.7 |
| 2008 Q1 | 7,850 | 0 | 0 | 0.0 |
| 2007 Q4 | 7,685 | 3 | 0 | 390.4 |
| 2007 Q3 | 7,911 | 1 | 0 | 126.4 |
| 2007 Q2 | 8,444 | 1 | 0 | 118.4 |
| 2007 Q1 | 8,918 | 1 | 0 | 112.1 |
| 2006 Q4 | 9,931 | 2 | 1 | 201.4 |
| 2006 Q3 | 11,846 | 1 | 0 | 84.4 |
| 2006 Q2 | 11,009 | 0 | 0 | 0.0 |
| 2006 Q1 | 10,295 | 2 | 1 | 194.3 |
| 2005 Q4 | 11,194 | 2 | 0 | 178.7 |
| 2005 Q3 | 10,776 | 1 | 0 | 92.8 |
| 2005 Q2 | 10,080 | 2 | 0 | 198.4 |
| 2005 Q1 | 9,187 | 3 | 1 | 326.5 |
| 2004 Q4 | 9,156 | 4 | 1 | 436.9 |
| 2004 Q3 | 8,995 | 0 | 0 | 0.0 |
| 2004 Q2 | 9,009 | 2 | 0 | 222.0 |
| 2004 Q1 | 9,000 | 3 | 1 | 333.3 |
| 2003 Q4 | 8,375 | 1 | 0 | 119.4 |
| 2003 Q3 | 8,962 | 2 | 0 | 223.2 |
| 2003 Q2 | 9,058 | 0 | 0 | 0.0 |
| 2003 Q1 | 8,977 | 0 | 0 | 0.0 |
| 2002 Q4 | 9,166 | 1 | 0 | 109.1 |
| 2002 Q3 | 9,163 | 0 | 0 | 0.0 |
| 2002 Q2 | 9,254 | 5 | 2 | 540.3 |
| 2002 Q1 | 9,437 | 1 | 0 | 106.0 |
| 2001 Q4 | 10,733 | 3 | 1 | 279.5 |
| 2001 Q3 | 12,371 | 2 | 0 | 161.7 |
| 2001 Q2 | 13,055 | 14 | 3 | 1072.4 |
| 2001 Q1 | 12,152 | 4 | 2 | 329.2 |
| 2000 Q4 | 12,448 | 14 | 3 | 1124.7 |
| 2000 Q3 | 15,041 | 34 | 5 | 2260.5 |
| 2000 Q2 | 13,851 | 3 | 0 | 216.6 |
| 2000 Q1 | 13,467 | 9 | 5 | 668.3 |
Incidentes reportables
38 en archivo2015 · 1 incidente
2014 · 2 incidentes
Was working at the surface plant on rollers and conveyers with a wrench and pulled right shoulder causing tingling in index, thumb and middle finger.
Employee pulled away from crusher with his 35 ton truck bed in the air. The bed of the truck hit the ceiling of the mine and although the employee states that he was wearing his lap belt, he was thrown into the steering wheel and suffered lacerations and a broken nose.
2013 · 1 incidente
Plant Operator was moving base stacker conveyor out of way for the Loader Operator. During this maneuver hydraulic hose broke. While searching for leak, either in hose or connections, he asked that it be raised up and pump turned on. In doing so pressure was reinstated in hose. Hand was positioned right over hole causing penetration to middle finger on right hand.
2011 · 1 incidente
Changeling a punch plate on the second deck of scalping screen. EE stated he felt a pull in his lower back. Declined med attention at this time. Called supervisor at 5:30pm on 10/31/11 and stated his back was stiff and sore, but he would wait until morning and see how it felt. Called supervisor at 5:30 am on 11/1/11 and requested to see a doctor because his back still hurt.
2010 · 1 incidente
Prying rock out of motor and guard on scalping screen. Pry bar slipped and mashed finger between bar and motor. Went to doctor, gave anti-inflamatory and finger splint.
2009 · 2 incidentes
EE was in a lift basket scaling the roof of the mine. He stated that he twisted while trying to pull down a piece of rock with a pry bar, and pulled a muscle in his neck/back area. EE has been prescribed muscle relaxers, anti-inflammatories and pain aid. He will not work until the Dr. has released him. Dr. will reevaluate in one week.
EE was in a lift basket with another EE when the lift basket was raised too high & the employee bumped his hard hat on the ceiling. Employee did not report discomfort until 5 days later & was sent to a physician. Minor diagnostic & medical attention was given & a follow up visit was scheduled. A 3rd visit was scheduled 3/31/09, thus making the injury reportable(a "Series")
2007 · 1 incidente
Employee was scaling the roof of the mine when the mechanical scaler that he was operating came off of its' turntable and toppled over. He suffered bruises and contusions. He has been fully released as of today.
2001 · 1 incidente
EE WAS PULLING A 3" DISCHARGE HOSE WHEN HE STEPPED ON A ROCK & TWISTED HIS RIGHT ANKLE. HE TRIEDTO KEEP FROM FALLING DOWN BUT COULDNT GET HIS RIGHT LEG UNDER HIM ALL THE WAY
2000 · 1 incidente
EE REPORTED HIS PROBLEM IN 3/2000 ON 3/15/00 WE SENT HIM TO THE CO DR & IT WAS DETERMINED HE HAD AN UMBILICAL HERNIA & THE EE ALLEGES IT WAS CAUSED FROM DRIVING HIS CAT DUMP TRK. HE IS SCHE DULED FOR SURGERY BUT THAT IS PENDING INVESTIGATION BY OUR WORK COMP INS CO. HE HAS BEEN WORKINGLIGHT DUTY SINCEY 3/15/00
1999 · 2 incidentes
EE WAS REPAIRING A EUCLID R-22 DUMP BODY. THE DUMP BODY WAS RAISED AND SECURED. HE HAD FINISHED WELDING AND FLIPPED UP HIS WELDING MASK TO CHIP SLAG OFF OF HIS WELD WHEN HE FELT SOMETHING HIT HIS EYE. HE WAS WEARING SAFETY GLASSES. AT ABOUT 9:20 HE WENT TO THE RESTROOM AND COULD SEE SOMETHING IN HIS EYE, SO HE TOLD HIS PLANT MANAGER.
EE GHAD FUELED HIS LOADER AND WAS HANGING UP THE HOSE WHEN HE TWISTED HS BACK.
1995 · 3 incidentes
EE WAS STRAIGHTENING A COTTER PIN ON THE TAMROCK TRACK DRILL. HE WAS HOLDING THE PIN AGAISNT HE DRILL WITH HIS RIGHT HAND AND USING A HAMEMR WITH HIS LEFT. AS HE WA POUNDING ON THE PIN HIS F LASHLIGHT FELL TO THE GROUND CAUSING TO STRIKE HIS THUMB ON HIS RIGHT HAND WITH THE HAMMER.
EMPLOYEE WAS ATTEMTPING TO REMOVE ROCK FROM THE CRUSHER WHEN HE SPRAINED HIS LOWER BACK.
MAN WAS SUPERVISING CLEARING OFLARGE BOULDERS FROM PRIMARY CRUSHER USING A STEEL CABLE TO PULL THEM OUT OF THE CRUSHER HE WAS SIGNALLING THE TRUCK DRIVER TO PULL FORWARD WHEN THE CABLE PULLED THE STEEL SPILL PROTECTOR OFF OF THE ROCK BOX DUMP HOPPER & PINNED HIS RT ANKLE AGAINST THE GROUND
1994 · 1 incidente
EMPLOYEE WAS ABSENT FROM WORK MARCH 30, 31,AND APRIL 1, 1994. EMPLOYEE RETURNED TO WORK APRIL 41994 WITH NOTE FROM DR. SAYING, HE HAS AN INJURYTO HIS LEFT ARM AND WILL BE ABLE TO RETURN TO WORK ON MONDAY APRIL 4, 1994.
1993 · 2 incidentes
TRUCK DRIVER HAD PARKED WATER TRUCK UNDERGOUND, CLIMBED DOWN OUT OF IT TO MAKE SURE IT WAS PARKED IN CORRECT SPOT, THE DRIVER THEN CLIMBED BACK INTO TRUCK, TURNED THE TRUCK S HEADLIGHTS OFF, A ND WHEN CLIMBED OUT OF THE TRUCK THE DRIVER MISSED THE BOTTOM STEP AND FELL ON HIS BACK.
AN EQUIPMENT OPERATOR WAS SCALING WIATH THE GRADALL SCALER IN THE SOUTHWEST CORNER AREA OF THE MINE WHEN A ROCK THAT HE SCALED LOOSE ROLLED TO THE GRADALL & BECAME LODGED BETWEEN THE ACCESS LA DDER & FRONT WHEEL. THE OPERATOR ASKED A NEARBY EQUIPMENT OPERATOR TO HELP HIM DISLODGE THE ROCK & WHILE DOING SO THE MAN HELPING THE GRADALL OPERATOR STRAINED HIS BACK.
1991 · 3 incidentes
EMPLOYEE WAS SCALING A BASE ROCK OFF OF THE CEILING. THE EMPLOYEE WAS USING A SCALING BAR AND AS HE WAS PRYING UPWARD, HE FELT A SHARP PAIN IN HIS LOWER FRONT STOMACH.
EMPLOYEE WAS OPERATING CRUSHER, DUE TO A WIND SHIFT, EXHAUST FUMES OFF A DIESEL ENGINE SEEPED INTO THE CRUSHER SHACK CAUSING EMPLOYEE TO BECOME NAUSEATED AND DIZZY.
INJURED WAS USING A HACKSAW ON AN ALL THREAD ROD,THE SAW DROPPED DOWN AND CUT HIS INDEX FINGER.
1990 · 3 incidentes
EMPLOYEE'S INJURY WAS NOT REPORTED TO HIS SUPERVISOR UNTIL 01-22-91.EMPLOYEE SAID THAT ON OR ABOUT 11-19-90 HE FELL DOWN WHILE CARRYING A BAG OF ANFO.EMPLOYEE WENT TO DOCTOR ON 12-22-90 AND WA S TOLD HE HAD PULLED MUSCLES IN HIS HIP AND LEGS.EMPLOYEE WAS GIVEN A PRESCRIPTION FOR ANTI-INFLAMMATORY MEDICATION.THE EMPLOYEE DID NOT REPORT THE PRESCRIPTION UNTIL 01-22-91.
WHILE HE WAS CHAINGING A BATTERY IN EUCLID AND PICKING UP BOLTS AND WRENCHES, DUST CAME DOWN AND HE FELT SOMETHING IN HIS EYE. HE WAS WEARING SAFETY GLASSES. HE WENT TO THE DOCTOR. THE DOCT OR FOUND A PIECE OF STEEL IN HIS EYE.
USING TORCH WELDING SLAG HIT HIS EYE WEARING GLASSES HOT WELDING SLAG FORM TORCH HIT R EYE
1989 · 3 incidentes
HE WAS ROLLING OUT WIRE, AND AS HE WAS WALKING ALONG, HE TRIPPED AND FELL ON UNEVEN GROUND.
HE WAS SCALING IN THE MAN LIFT WHEN HE WAS HIT ON TOP OF HIS HEAD BY A FALLING ROCK. HE WAS WAS WEARING A HART HAT.
GROUND WAS COVERED WITH ICE.SLIPPED ON ICE AND FELL.HIS BACK WAS INJURED BY FALL.
1988 · 5 incidentes
HE WAS BENT OVER AND ROLLING UP AN EXTENSION CORD WHEN A ROCK FELL OFF THE MINE CEILING AND HIT HIM ON THE BACK OF HIS HEAD THROUGH HIS HARD HAT.HIS NECK WAS AFFECTED BY A STRAIN.
HE WAS USING PIPE TO CLEAN OUT MINERAL FILTER & HE HIT HAND ON DOOR OF AIR SEPARATOR. SIDE OF DOOR OF AIR SEPARATOR CUT FIRST FINGER ON RIGHT HAND.
HE SAID HE HAD REMOVED A COUPLING FROM AJUMBO FRILL AND HAD BACKED UP FROM THE DRILL WHEN THE COUPLING CAME OFF AND OIL AND SLIVER OF METAL CAME FROM THE DRILL.SMALL METAL STEEL SHAVING CAUSED PUNCTURE WOUND TO THE RIGHT EYE.
HE WAS DOING MAINTENANCE ON COMB CURSHER HE JUMPED OFF FRAME OF COMB CRUSHER WHEN HE LANDED ON GROUND, HE SPRAINED RIGHT ANKLE.
HE WAS REPLACING WEAR PLATE IN CHUTE & DROPPED RATCHET & IT FELL UNDERNEATH GUARD. AFTER GRABBING IT HE PULLED HAND OUT LEFT HAND & CUT IT.
1985 · 2 incidentes
LIGHTNING CAUSED PREMATURE DETONATION OF LOADED EXPLOSIVES NO DAMAGE OR INJURY RESULTED MSHA NOTIFIED NEXT MORNING
EMPLOYEE WAS MOVING A PUMP GUARD WHEN HE PULLED A MUSCLE IN HIS BACK.
1984 · 3 incidentes
INJURED BACK.
METAL BOOM FAILED ON MANLIFT RESULTING IN THE BASKET WITH TWO MEN IN IT TO FALL APPROX 25 FT THE TWO MEN WERE RONNIE CAUDLE AND LAWRENCE CORNWELL RON CAUDLE WAS NOT SERIOUSLY INJURED
EE WAS LIFTING HEAVY CRUSHER HAMMERS & HURT HIS BACK. HE WAS ABLE TO KEEP WORKING UNTIL MARCH 1 WHEN BACK PAIN FORCED HIM TO FO TO HIS DOCTOR.