Registro de la MSHA sobre RICHMOND QUARRY (ID de mina 0400228). Muertes, incidentes no mortales agrupados por año, operador y controlador actuales, y contexto de la mina.
Avísenme cuando se presente un nuevo incidente de la MSHA en RICHMOND QUARRY.
EMPLOYEE WAS CLEANING OFF SCREEN DECK ON ROCK PLANT DECK WAS WET HESLIPPED & AS HE DID HE PUT HIS HANDS OUT TO BREAK HIS FALL AS HE DID HE STUBBED HIS INDEX FINGER ON HIS LEFT HAND
EMPL WAS WALKING THROUGH ROCK PLANT & PIECE OF CONCRETE FLOEW INTO HIS EYE.
EMPLOYEE WAS CHECKING TH EOIL IN THE #1 CONE CRUSHER AT THE ROCK PLANT. WHEN EMPLOYEE STARTED TO WALK AWAY, HE SLIPPED ON A ROCK AND HIS LEFT SHOULDER ON AN OIL TANK.
OPER FRONT END LOADER CLIMBED DOWN LADDER GOT OFF LOADER STEP BROKE FELL DOWN
EMPL WAS WORKING AT ROCK PLANT WHEN SCREEN SLIPPED & CAUGHT FINGER BETWEEN SCREEN & OVERSIZE CHUTE SMASHING LEFT INDEX FINGER.
EMPLOYEE WAS UNPLUGGING T HE #1 BUNKER & WAS WALKING UP THE CONVEYOR TO GET TO THE CATWALK PLANT OPERATOR STARTED THE CONVEYOR BELT & EMPLOYEE FELL DOWN ON HIS SHOULDER & ALSO HURT HIS BACK
EMPLOYEE STATES THAT HE TWISTED HIS BACK WHILE SHOVELING DIRT
EMPLOYEE STATES HIS BACK HURTS
EMPLOYEE STATES THAT WORKING AT THE BASE PLANT AT RICHMOND QUARRY, HIS BACK STARTED TO HURT.
EE WAS WORKING ON THE CONVEYOR BELT AND THE BELT CAUGHT HIS LEG AND INJURED HIS LEG AND ANKLE.
EMPLOYEE WAS LIFTING A CUTTING EDGE ON A LAODER.
EMPLOYEE WAS CLIMBING DOWN THE LADDER ON HIS LOADER AND MISSED THE LAST STEP ON THE LADDER INJURING HIS LOWER BACK.
EMPLOYEE WAS WORKING ON THE ROCK PLANT AND STEPPED ON A ROCK AND TWISTED HIS LEFT ANKLE.
EMPLOYEE WAS WORKING ON THE CONVEYOR BELT WHEN TWO ROCKS WEDGED TOGETHER RESTRICTING THE OPENING OF THE FEED BELT. EMPLOYEE TOOK A PRY BAR TO FREE THE ROCKS WHEN A ROCK CAME BOUNCING DOWN THE BELT AND STRUCK EMPLOYEE ON THE ELBOW.
EMPLOYEE WAS REPAIRING A SCREEN AND HIS ARM PINCHED BETWEEN A WALKWAY AND SCREEN AND BRUISED HIS ARM AND ELBOW.
OPERING TEEL DOOR ON SILO DIDNOT LET GO OF DOOR FINGER PINCHED IN DOOR AND WALL
EMPLOYEE STATES THAT HE WAS DRIVING HIS LOADER IN THE YARD AND TURNED HIS LOADER AWAY FROMA DN ONCOMING CAR TO AVOID AN ACCIDENT AND INJURED HIS SIDE.
EMPLOYEE WAS WELDING AND A WELDING FLASH FROM THE ARC WELDER BURNED HIS EYE.
EMPLOYEE WAS REPAIRING A LOADER WHEN HE NOTICED SOMETHING BOTHERING HIS EYE.LATER THE NEXT DAY IT STILL BOTHERED HIM SO HE WENT TO SEE THE DOCTOR.IT IS NOT KNOWN EXACTLY WHEN THE PARTICLES GOT IN HIS EYE.
EMPLOYEE OPERATES A FRONT END LOADER HE HAS DEVELOPED A SORE BACK CAUSED BY RIDING IN A FRONT END LOADER
EMPLOYEE WAS CLEANING A ROCK CHUTE AT THE ROCK PLANT AND BEGAN TO SLIDE DOWN THE CHUTE AFTER SOME MATERIAL BROKE LOOSE. HE TRIED TO GRAB THE CHUTE AND STOP HIMSELF FROM FALLING AND DISLOCATED HIS RIGHT ARM AT HIS SHOULDER.
EMPLOYEE WAS RE4OVING A LARGE ROCK FROM JAW CRUSHER EMPLOYEE MOVED ARM BACK AND HIT ELBOW ON PIPE RAILING
EMPLOYEE WAS CH5NGING OIL ON A DDOZER AN AIR WRENCH FELL AND HIT HIS LEFT THUMB AND BROKE IT
EMPLOYEE STATES3THAT HIS BACK IS HURTING
EMPLOYEE WAS PI7KING UP TOOLS AT BASE OF #1 BUNKER AT THE ROCK PLANT A 6 IN ROCK FELL OFF THE BUNKER HITTING THE EMPLOYEE ON THE LEFT ARM
EMP BENT OVER T2 PULL STARTER ROPE ON PUMP DISC SLIPPED IN BACK OPERTING DOZER AGGRAVATED THIS AND JAMMED SPINE
EMPLOYEE WAS SW3TCHING WIRES ON HOT SIDE OF CIRCUIT BREAKER MAIN SWITCH WAS ON AND EMPLOYEE GOT A FLASH BURN TO EYES, FACE AND LEFT WRIST.
DOZER BOUNCED OFF ROCKS & JARRED EES BACK.
CHIP OF RUSTY MATERIAL WENT IN RIGHT EYE WHEN HE WAS CHIPING RUST OFF HAND RAIL TO WELD IT TOGETHER
REPLACING TROUGHING ROLLERS IN #1 CONVEYOR. ROLLER SLIPPED OUT OF HIS HAND, CAUGHT HAND BETWEEN FRAME OF CONVEYOR AND TROUGHING ROLLER.
EMPLOYEE WAS SITTING IN CAB OF DOZER, HE TURNED TO LOOKOVER HIS SHOULDER AND WRINCHED HIS BACK,
EMPLOYEE WAS HELPING ANOTHER MAN DO WELDING WITH AN ARC WELDER.
EMPLOYEE WAS REMOVING BACK COVER OF 8 X 20 SIMPLEX SCREEN WITH A 3/4 TON CHAIN HOIST. EMPLOYEE PULLED ON THE CHAIN OF HOIST CAUSING THE HANDLE TO SPIN AROUND. HANDLE HIT EMPLOYEE IN FACE.
EMPLOYEE WAS LIFTING A BOX INTO THE BACK OF A PICKUP TRUCK. THE EMPLOYEE DID NOT LIFT BOX HIGH ENOUGH INTO THE BACK OF THE PICKUP-BOX HIT PICKUP BED AND HIS BODY HIT AGAINST THE BOX.
EMP WAS CUTTING 1/4" ANGLE IRON WITH ACETYLENE TORCH. HE WAS HOLDING TORCH IN RIGHT HAND THREW A PIECE OF ANGLE IRON HE HAD JUST CUT INTO A BUCKET TO COOL AND HIS LEFT HAND PASSED UNDER THE TO RCH
EMPLOYEE WAS LIFTING BATTERIES IN SHOP AREA
EE WAS ATTACHING A CABLE TO A LOADER BUCKET OF 560 HOUGH LOADER. HE CLIMBED UP ON BUCKET FROM THE BACKSIDE & STRAINED A MUSCLE IN LEFT SHOULDER.
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.