Electrician was installing a pump in a sump located outside on the hill ramp leading to the pit. He slipped into the sump while installing the pump, caught himself on the cable to the pump, tearing muscles in chest area. Did not report accident till 9-2-14, after visits to hospital
Shean Hill Mine Coal
Shean Hill Mine tiene $33K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Shean Hill Mine.
- Muertes
- 0
- Incidentes totales
- 10
- Años en registro
- 2011–2014
- Último incidente
- Aug 2014
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Shean Hill Mine tiene $33K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en Shean Hill Mine muestra un polvo respirable de carbon promedio de 0.71 mg/m3 (91% en cumplimiento) en 397 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2017 Q4 | 3,259 | 0 | 0 | 0.0 |
| 2017 Q3 | 1,612 | 0 | 0 | 0.0 |
| 2017 Q2 | 2,891 | 0 | 0 | 0.0 |
| 2017 Q1 | 2,230 | 0 | 0 | 0.0 |
| 2016 Q4 | 3,490 | 0 | 0 | 0.0 |
| 2016 Q3 | 2,509 | 2 | 0 | 797.1 |
| 2016 Q2 | 4,969 | 1 | 0 | 201.2 |
| 2016 Q1 | 1,145 | 1 | 0 | 873.4 |
Mostrar 29 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2015 Q4 | 10,277 | 0 | 0 | 0.0 |
| 2015 Q3 | 3,658 | 1 | 0 | 273.4 |
| 2015 Q2 | 13,801 | 0 | 0 | 0.0 |
| 2015 Q1 | 18,213 | 15 | 4 | 823.6 |
| 2014 Q4 | 19,958 | 3 | 3 | 150.3 |
| 2014 Q3 | 20,824 | 4 | 0 | 192.1 |
| 2014 Q2 | 21,324 | 5 | 1 | 234.5 |
| 2014 Q1 | 20,688 | 9 | 2 | 435.0 |
| 2013 Q4 | 14,044 | 3 | 1 | 213.6 |
| 2013 Q3 | 16,163 | 9 | 1 | 556.8 |
| 2013 Q2 | 19,096 | 4 | 1 | 209.5 |
| 2013 Q1 | 22,391 | 7 | 2 | 312.6 |
| 2012 Q4 | 17,324 | 5 | 4 | 288.6 |
| 2012 Q3 | 18,550 | 9 | 2 | 485.2 |
| 2012 Q2 | 21,290 | 4 | 1 | 187.9 |
| 2012 Q1 | 25,333 | 8 | 0 | 315.8 |
| 2011 Q4 | 20,112 | 4 | 1 | 198.9 |
| 2011 Q3 | 21,935 | 9 | 2 | 410.3 |
| 2011 Q2 | 20,058 | 5 | 0 | 249.3 |
| 2011 Q1 | 23,515 | 12 | 3 | 510.3 |
| 2010 Q4 | 20,851 | 11 | 2 | 527.6 |
| 2010 Q3 | 19,511 | 11 | 3 | 563.8 |
| 2010 Q2 | 22,416 | 10 | 4 | 446.1 |
| 2010 Q1 | 23,677 | 10 | 2 | 422.4 |
| 2009 Q4 | 26,132 | 6 | 3 | 229.6 |
| 2009 Q3 | 25,186 | 10 | 4 | 397.0 |
| 2009 Q2 | 8,379 | 7 | 1 | 835.4 |
| 2009 Q1 | 6,806 | 5 | 4 | 734.6 |
| 2008 Q4 | 4,030 | 1 | 0 | 248.1 |
Incidentes reportables
10 en archivo2014 · 3 incidentes
A shard of flew off of drill steel while roof bolting at the face, and stuck in ee right pointer finger. Reported it to his fellow bolter and removed it and continued to work every day till Friday the 14th., where he reported it as infected and sought medical attention.
While traveling from face to face while doing his normal maintence job, the miner caught his head on a roof bolt while driving on a man trip, spraining his neck. Miner waited to report the injury till 1-10-14, thinking it would heal over time, did not seek medical attention till that past week.
2013 · 2 incidentes
Scoop operator was hand shoveling along the rib at the face of the crosscut B-4 production hole on the return side, when a piece of roof approx. 15" wide, 4' long and 10" thick fell from the roof in between bolts and struck the operator on the right shoulder, dislocating his shoulder.
While bolting a face cut. The bolter operator was in the process of preparing to drill the hole for the inside bolt on his side of the bolter. When the bit touched the roof, a piece of roof rock 1-2" thick, 2' wide and 5' long fell from the roof. It hit the support arm of the ATRS and slid down it, hitting the bolter operator on the right side of his head, shoulder and chest.
2012 · 1 incidente
Operator of a CAT 980G loader had just taken a bucket of coal from the stockpile, when the loader quit. He turned to check the problem and found a fire under the hood. He proceeded to fight the fire with other mine personnel helping. The local fire department was contacted and arrived on scene to finish fighting. No one was injured
2011 · 4 incidentes
He was driving miner bits into the auger head of the miner, when something struck his left eye. He did not notice much discomfort and continued to work, even reporting to work the next day for his entire shift. Woke up the following day with discomfort and went to eye doctor. Tests found a sliver of metal in his left eye
While attempting to work loose a stuck drill steel in the roof, the drill steel became bound in the drill chuck with some side pressure. The drill steel snapped loose from the chuck striking the middle finger, lacerating the knuckle of his left hand.
While attempting to replace a splice on the 3-Rt Conveyor Belt, employee was attempting to re-cut the belt for a new splice and when closing the belt cutter, he pulled his left hand back and caught his middle finger against the belt cutter blade, lacerating the tip of his finger, requiring 3 stitches
Bolter operator was installing a roof bolt and felt a pain in his back as he straightened the roof bolt. Worked the rest of the shift with some discomfort.
The full compliance file on Shean Hill Mine
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.