Employee was trying to beat an insert out of a piece of drill steel using a pick hammer when he hit his left hand between the thumb and forefinger.
War Branch No 1 Mine Coal
War Branch No 1 Mine tiene $122K en multas propuestas de MSHA y $0 pendientes en 21 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en War Branch No 1 Mine.
- Muertes
- 0
- Incidentes totales
- 35
- Años en registro
- 2005–2009
- Último incidente
- Jul 2009
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.War Branch No 1 Mine tiene $122K en multas propuestas de MSHA y $0 pendientes en 21 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en War Branch No 1 Mine muestra un polvo respirable de carbon promedio de 0.52 mg/m3 (95% en cumplimiento) en 255 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2009 Q3 | 23,378 | 0 | 0 | 0.0 |
| 2009 Q2 | 36,646 | 27 | 6 | 736.8 |
| 2009 Q1 | 39,164 | 19 | 6 | 485.1 |
| 2008 Q4 | 33,386 | 13 | 3 | 389.4 |
| 2008 Q3 | 32,619 | 19 | 4 | 582.5 |
| 2008 Q2 | 36,475 | 48 | 6 | 1316.0 |
| 2008 Q1 | 39,178 | 33 | 9 | 842.3 |
| 2007 Q4 | 34,300 | 36 | 6 | 1049.6 |
Mostrar 13 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2007 Q3 | 38,552 | 9 | 1 | 233.5 |
| 2007 Q2 | 37,186 | 11 | 1 | 295.8 |
| 2007 Q1 | 37,050 | 5 | 0 | 135.0 |
| 2006 Q4 | 33,311 | 3 | 3 | 90.1 |
| 2006 Q3 | 13,260 | 5 | 1 | 377.1 |
| 2006 Q2 | 38,312 | 18 | 2 | 469.8 |
| 2006 Q1 | 38,858 | 3 | 0 | 77.2 |
| 2005 Q4 | 32,017 | 25 | 8 | 780.8 |
| 2005 Q3 | 26,645 | 10 | 3 | 375.3 |
| 2005 Q2 | 27,034 | 16 | 3 | 591.8 |
| 2005 Q1 | 17,524 | 19 | 6 | 1084.2 |
| 2004 Q4 | 3,323 | 0 | 0 | 0.0 |
| 2004 Q3 | 0 | 0 | 0 |
Incidentes reportables
35 en archivo2009 · 8 incidentes
Employee indicated she was on her knees when she threw a crib block and felt pain in her lower back.
Employee was going to pull the miner cable. When he reached down to get hold of the cable, his left thumb was cut on a discarded razor knife blade. Cut required 3 stiches.
Employee was operating a shuttle car when his hat was pulled off his head as he crossed under a cable hung from the roof. This startled him and caused him to turn too sharply as he attempted to go into the crosscut. His left shoulder came in contact with the rock rib.
The employee complained of back pain after lifting and turning and doing normal work of a scoop operator on March 3. He continued to work through April 27th without incident. He began missing work on April 28th due to back pain. He has a history of back problems. This is an occupational illness from repetitive motion trauma.
Employee was operating a small battery-powered vehicle. The vehicle struck a bag of rock dust, causing the steering wheel to spin and the steering knob to strike the employee's right hand.
An unintentional roof fall was discovered in the No. 9 return entry. The fall was near spad no. 3952 and was approximately 18' wide x 20' long by 4' thick. The area had been previously bolted with 42" fully grouted bolts. The fall will not be cleaned up as the return was routed to the adjacent entry.
The employee had just finished adjusting the ventilation curtain preparation for minng. He crawled outby to the right inby corner of the intersection and was on his knees talking with another employee. A piece of roof rock measuring approx. 60"x60"x1-1/2"to 3" fell at angle from between two rows of bolts. The rock struck the employee on the back and shoulders.
2008 · 3 incidentes
EE was duck walking when top ruller and turned and fell face down.
The employee was setting a timber when the roof began working. He turned to move outby and he twisted his ankle.
Employee was assisting in the removal of a planetary assembly from the continuous miner. He was attempting to let pressure off a hydraulic "grease jack". He loosened a grease fitting on the jack and it blew off, striking him on the forehead.
2007 · 10 incidentes
A roof fall was discovered during an examination at the mine. The fall was located in the return aircourses on the 3 right panel. It measured approximately 30' in length, 20' wide and 4' thick. The area had been previously bolted with 42" fully grouted bolts. There were no injuries, no damage to equipment, and ventilation was not affected.
As the continuous miner was completing a pushout, a piece of roof rock fell near the pushout and fouled the machine's cutter head. This prevented the continuous miner from being readily removed from the area. Sometime later, as the machine remained in this position, additional roof material fell onto the continuous miner. There were no injuries.
Employee was pushing a roof bolt into a hole when he got his finger between the drill pot and the bolt.
Employee was riding in the mantrip, when it hit a hole, jarring him. He felt pain in right upper body.
Employee and a co-worker were using a chain hoist to pull belt, when the hoist hook pulled loose and the chain and hook recoiled, striking injured on the right side of upper torso.
Employee was walking back to the deck of the roof bolting machine when he tripped and struck his right knee against the deck.
Employee was rock dusting the entry using a scoop with a rock dusting machine in the bucket. The center broke into on the scoop causing the employee to be bounced against the mine roof.
Employee was backing up in a 4 wheel battery ride. He jammed his head into the roof at a point where the roofline transitioned lower from the entry to the crosscut.
The operator of the roof bolting machine moved the back of the machine down catching injured's foot between the frame and the mine floor.
The employee was exiting the supply trailor. As she started down the steps she slipped and fell, striking her left shoulder.
2006 · 7 incidentes
The injured employee was positioned alongside the roof bolting machine operator's deck and had finished conversing with the operator who was in the deck. The operator started the machine and the injured employee was caught between the deck of the machine and the rib.
The roof sagged against the frame of the roof bolt machine in the #2 face for a span of approx. 12' in length and 12 to 14' in width. An area of approx. 8' X 19' wide of unsupported (unbolted) roof fell directly in front of the machine at the face. (After the initial call-in report, further investigation revealed this was not a reportable incident.)
Injured and a coworker were riding a battery powered 4 wheeled vehicle in the primary intake entry. The employee was operating the vehicle. As they were traveling, the hood of his jacket snagged on a metal roof support strap and this pulled his head toward the roof. His ear contacted something on the roof resulting in a laceration.
A fall of roof rock occurred in the No. 2 to No. 1 intersection near spad location 2032. The fall measured approx. 25' long x 18' wide x 4' thick. The area had been supported with 42" bolts. This area had previously been cribbed off. There were no injuries, no effect on ventilation and no equipment involved.
Employee was trying to pull stuck drill steel from the drill hole. The steel suddenly came loose out of the hole and he caught his left little finger between the steel and the drill pot.
A roof fall was found in the intersection of No. 4 entry one break inby spad location 1850. The fall was approx. 20'x 20'x 4' high. There were no injuries and no equipment damage. Ventilation was not affected and travel was not impeded. It was above the anchorage zone.
A ROOF FALL OCCURRED NEAR SPAD LOCATION 1869 IN #7 ENTRY. FALL WAS APPROX. 75' LONG X 20' WIDE X 4' THICK. THERE WERE NO INJURIES; NO DAMAGE TO EQUIPMENT. THE FALL WAS ABOVE ANCHORAGE. IT DID NOT AFFECT VENTILATION OR IMPEDE PASSAGE.
2005 · 7 incidentes
Injured was working at #3 tailpiece aligning belt structure when the belt structure separated causing him to mash his right middle finger. This resulted in a non-displaced fracture of the finger.
A roof fall occurred in the #5 entry approximately 15' inby 1615. The fall is about 70' long 20' wide and 5' high. The fall will not be cleaned up at this time. The area was cribbed off prior to the fall.
Superisor was assisting in installing a ripper motor on the miner when the motor slipped, causing his hand to be caught between the motor and miner frame. He sustained a fracture to the ring finger on his left hand and received medical treatment on his finger on 6/28/05.
Employee was attempting to tighten lug nut on a 3 wheeler when the ratchet slipped causing his hand to strike the fender of the ride. He was diagnosed as having a non-displaced fracture to his hand. He has not missed any work and is still performing mechanic duties. His work schedule is 4 on 2 off.
Employee was assisting in removing the side guard off of the feeder to replace a shear pin and got his left middle and index finger caught between the guard and the frame of the feeder.
CUT OVER LEFT EYE, DRAW ROCK FELL FROM TOP & HIT HIM OVER THE EYE.
EE was duck walking when he tripped to catch himself with his right hand, his right thumb hit the floor first causing a sprain to his thumb.
The full compliance file on War Branch No 1 Mine
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.