Registro de la MSHA sobre White Cabin Mine Number One (ID de mina 1517531). Muertes, incidentes no mortales agrupados por año, operador y controlador actuales, y contexto de la mina.
Avísenme cuando se presente un nuevo incidente de la MSHA en White Cabin Mine Number One.
PRESHIFT EXAMINER FOUND TWO MOBILE ROOF SUPPORTS WITH A PORTION OF THE MINE S ROOF SITTING ON THEM. THIS MMU WAS EXTRAXTING PILLARS AT THE TIME. PILLAR MINING CEASED AND THE ACTIVE MMU WAS MOV ED APPROX. 1000 FT OUTBY. THE MRS ARE SETTING ATSURVEY STATION NUMBER 20906.
A PORTION OF MINE ROOF FELL ON THE ACTIVE WORKING SECTION. THE FALL MEASURED APPROX 48' LONG BY 8' WIDE BY 4 TO 5 FEET THICK. PART OF THE FALL LANDED ON A ROOF BOLTING MACHIINE. DAMAGE TO T HE MACHINE WAS MOSTLY TO COVER PLATES AND WAS REPAIRED IN A RELATIVELY SHOFT PERIOD OF TIME.
INJURED WAS STANDING IN AN ENTRY WHEN A PIECE OFCAP COAL FELL FROM THE ROOF.
EMPLOYEE WAS PULLING TOGETHER CONVEYOR BELT WITH CHAIN HOIST AND BELT CLAMPS WHEN THE CLAMPS SLIPPED AND THE BELT FLEW BACK AND HIT EMPLOYEE IN RIGHT ELBOW. CONVEYOR BELT NOT CAPABLE OF USE. I AM CONSIDERING THIS A HANDTOOL TYPE ACCIDENT.
A ROOF FALL OCCURRED AT SURVEY STATION 17869. THE FALL MEASURED APPROX. 20' X 20' X 6'.
S ROOF FALL OCCURRED APPROX. 70' INBY SURVEY STATION 18172. THE FALL MEASURES APPROX 40'L, X 20'W, X 10'T.
A ROOF FALL OCCURRED ON NUMBER 4 CONVEYOR BELT ENTRY 70' IN BY SURVEY STATION 18174. THE FALL MEASURES APPROX 40'L X 20'W X 6'THICK.
A ROOF FALL OCCURRED IN A WORKED OUT AREA OF THE MINE ADJACENT TO ACTIVE WORKINGS. THE ACTIVE MINING UNIT WAS RELOCATED 500 FEET FROM THE AFFECTED AREA.
WHILE ATTEMPTING TO CUT A RAG, EE CUT HIS FINGER WITH HIS KNIFE, REQUIRING STITCHES.
A ROOF FALL OCCURRED ON THE #3 CONVEYOR BELT FLIGHT. THE FALL MEASURED APPROX 20'W X 40' X 8'THICK.
EMPLOYEE WAS STANDING ON A STEP LADDER WHILE HANGING A TRAILING CABLE, WHEN HE FELL. A DEVICE USED TO SUSPEND THE CABLE CUT HTE PALM OF HIS RIGHT HAND.
THE EMPLOYEE WAS TAKING BOLTS OUT THE PANEL LID. THE BOLT BROKE LOOSE AND THE EMPLOYEE'S HAND STRUCK A PIECE OF METAL THAT CUT THROUGH HIS GLOVE AND CUTTING HIS LEFT LITTLE FINGER.
A ROOF FALL OCCURRED IN THE NUMBER SIX ENTRY 70FT INBY SURVEY STATION NUMBER 18178 THE FALL MEASURES APPROXIMATELY 5 FT THICK 20FT WIDE & 80FT LONG
EMP WAS IN PROCESS OF INSTALLING PERMANENT ROOF SUPPORT WHEN A PIECE OF SHALE ROOF MATERIAL FELL
A ROOF FALL OCCURRED AT SURVEY STATION 18241 THE FALL WAS IN NUMBER 5 ENTRY & EXTENDING INTO CROSSCUT BETWEEN NUMBERS 5 & 6 ENTRY THE FALL WAS APPROX 20FT X50FTX81/2FT
A ROOF FALL OCCURRED IN NUMBER 4 ENTRY AT SURVEY STATION NUMBER 17871. THE FALL WAS APPROXIMATELY 20' X 50' X 7'.
EMPLOYEE HAD DISMOUNTED A SCOOP AND SPOKE TO A FELLOW EMPLOYEE. AS THE CO WORKER TURNED AROUND, HE UNINTENTIONALLY SPRAYED A BRATTICED SEALANT INTO THE EMPLOYEE'S EYES. THE EMPLOYEE STATED HE COULD HAVE RESUMED HIS REGULAR DUTIES AFTER FIRST AID TREATMENT. WHEN HE AROSE FROM SLEEPING THAT DAY, HIS EYES WERE SWOLLEN & SENSITIVE TO LIGHT. EMPOYEE DIDN'T SEEK MEDICAL TREATMENT.
EE WAS MAKING MINOR REPAIRS TO A CONVEYOR BELT TAILPIECE WHEN HE SLIPPED AND FELL INTO THE TAILPIECE. THIS ACCIDENT IS TO BE CONSIDERED A SLIPPING/BUMPING TYPE.