Buscar en el registro

Employee was lifting a one inch impact above his head, twisted wrong and strained his chest.

The conditions at the plant were all clean and in good shape. The problem happened when the employee slipped while putting in a bolt on the motor mount at the cone and was not wearing his fall protection equipment.

Approximately 4 hours of welding in 100+ degree weather with leathers on & in semi-confined area. Was drinking water but became weak & started cramping up leading to impaired ability to control self for 15 minutes.

Employee was exiting crawl space area and stood up going forward striking his head on beam jamming his neck. Employee broke his hard hat when he struck beam. He worked for 3 weeks after accident until pain was only getting worse and he decided he better see a doctor.

While filling water truck, rock and dirt slid down embankment causing employee to be knocked from barrier he was standing on. He fell between water truck and barrier wall.

Reaching behind seat of haul truck to get seat belt, he hurt his hand on the A/C fan blade.

While changing teeth on the PC 300 track hoe, EE's finger was hit with the sledge hammer.

WHILE PUTTING RETURN ROLLER IN PLACE ON A/B STACKER FEED CONVEYOR, THE RETURN ROLLER CAME OUT OF MOUNT & STRUCK RT. HAND INDEX FINGER. FINGER WAS HIT BY THE RETURN ROLLER & FINGER WAS CAUGHT BETWEEN FRAME OF CONVEYOR & ROLLER.

JOSTLING IN HAUL TRUCK IN MINE PIT RESULTED IN CHATTERING OF TEETH WHICH CAUSED TOOTH TO FRACTURE

While attempting to reverse the rotation of an electrical motor, employee received flash burns to both eyes & minor burns to his rt. wrist. EE opened what he believed to be the correct circuit breaker. However, the wrong circuit breaker was in fact opened thus the power was not shut off to the motor. He was using a pair of needle nose pyiers to move the wires, explosion occurred.

STEPPED OFF LADDER ON LOADER & FELT BACK POP. PULLED LOWER BACK MUSCLE.

HELPING TO CHANGE SCREEN CLOTH ON 11.40 EL-JAY SCREENING PLANT, PINKY FINGER ON LT. HAND GOT CAUGHT IN SCREEN CLOTH. 1ST DR. SAID FINGER WAS SPRAINED & LIMIT HEAVY LIFTING. 2ND DR.(ORTHOPEDIC SURGEON) SAID THE FINGER WAS FRACTURED & SPRAINED. RESTRICTED USE OF RING & PINKY FINGER, LIGHT DUTY ON MIDDLE INDEX, NO LIFTING W/LEFT HAND.

Ee stated he was swinging sledge hammer to break up rocks. On one swing he missed hitting the rock causing his body to twist oddly causing strain.

DURING REPAIRS TO YELLOW 100 FT BELT, FORKLIFT & OPERATOR WERE HANGING LAST PIECE OF SKIRTING STEEL WHEN FORKLIFT TURNED OVER ON ITS SIDE. OPERATOR WAS THROWN AGAINST INSIDE OF ROPES & CAB CAG E CAUSING GASH & BRUISES.

SCREEN CHANGE ON BOTTOM DECK. SPRAIN OCCURRED WHEN HE PUSHED UP WHILE LYING ON HIS BACK. NOTE: 10/17 (FRIDAY) - DOCTOR TOLD HIM TO REST OVER THE WEEKEND & RETURN FOR FOLLOW-UP ON TUES 10/21/03 . PRESCP. MEDS GIVEN, PUT ON RESTRICTED DUTY & PHYSICAL THERAPY ON 10/21/03.

NEITHER OPERATOR NOR LABORER FOLLOWED PROPER LOCK-OUT PROCEDURE WHICH LEAD TO UNIT ACTIVATING. INJURED EE WENT IN TO FEEDER TO CLEAR ROCKS. OPERATOR SAW LABORER CLIMB OUT & LEANED OVER TO YEL L AT LOADER OPERATOR ON RADIO NOT TO DROP BUCKET OF MATERIALS. AS HE LEANED OVER, OPERATOR HIT FEEDER BUTTON & LABORER FELL ONTO BELT.

EE WAS STANDING BEHIND BERMED OFF AREA OF BACK FILLED MATERIAL WHEN THE GROUND STARTED TO MOVE. AS HE TURNED TO MOVE FROM THE AREA HE LOST HIS FOOTING AND FELL BACKWARD ON HIS LT LEG.

EE STATES "COULD ONLY USE RIGHT HAND TO PULL HIMSELF UP ONTO THE TRUCK. PUT RIGHT FOOT IN STEP ON FUEL TANK, REACHED UP AND GRABBED BAR. AS HE WAS PULLING HIMSELF UP, HIS FOOT SLIPPED & HIS WHOLE BODY SHIFTEDTO THE RIGHT & HE FELL ACROSS THE FUEL TANK.

LOADING OUT PIT RUN, BANK COLLAPSED, NO ONE AT FAULT.

EE WAS GRADING ROADS. HE WAS LETTING THE BLADE DOWN & WHEN THE BLADE TOUCHED THE ROAD, THE CONTROL LEVER KICKED BACK CAUSING WRIST TO BE JAMMED.

A/C BLOWER FAN ON 988 LOADER WAS STUCK. EE PUT HAND IN TO SPIN THE FAN AND IT STARTED UP AND UPLLED HIS FINGERS INTO IT. THE SWITCH HAD BEEN LEFT IN THE "ON" POSITION BY MISTAKE.

EMPLOYEE WAS ADJUSTING TAIL ROLL AT CRUSHING SITE WHEN WRENCH GOT CAUGHT CAUSING FINGERS TO BE SMASHED.

SLIP ON LADDER.

CAUGHT HIS HAND ATTEMPTING TO FREE STUCK CONVEYER BELT IDLER ROLLER.

EMPLOYEE'S RIGHT HAND WAS CAUGHT BETWEEN WRENCH AND THE WALL, SMASHING RIGHT MIDDLE RING FINGER.

ROCK ALLEGEDLY FELL FROM TOP OF FEEDER WALL ONTO WORK'S LOWER BACK AND BUTTOCKS. REFUSED OUR OFTEN TO HAVE HIM SEE A DR.

FLYING ROCK STRUCK EE'S LEFT EYE. (FLEW OVER 50 FEET).

WORKER ATTEMPTING TO MOVE LARGE ROCK STUCK ON CONVEYOR (STOPPED). PLACED HANDS INCORRECTLY ON ROCK & WAS CAUGHT WHEN ROCK FELL DOWN.

MINER WAS ATTEMPTING TO ATTACH LIGHT PLANT TRAILER HITCH TO HITCH BALL. RATHER THAN USING CORRECT METHOD OF RAISING HITC WITH THE BUILTIN LIFTING DEVICE, AND THEN LOWERING ONTO THE HITCH BALL, THRE MINER INSTEAD WAS JUST OIFTING THE TRAILER ALL, TH EE INSTEAD WAS JUST LIFTING THE TRAILER TONGUE WITH HIS HANDS. HIS RT. HAND THEN WAS CAUGHT BETWEEN THE HITCXH & BALL, RESULTING IN A P

EE LOST BALANCE WHILE DISMOUNTING TRACKHOE AND STRUCK R HAND ON SCREEN LACERATING THE KNUCKLE OF HIS MIDDLE FINGER

UNCLEAR--A ROCK WAS OBSERVED BY ANOTHER EE BOUNCING OFF THE SCREEN APRON. WHEN EE LOOKED TO SEE WHERE IT HAD FALLEN, HE OBSERVED INJ EE STAGGER FROM UNDER THE SCREEN AREA WITH HIS HARD HAT ON NO ONE SAW THE IMPACT OF THE ROCK ON INJ EE

PIPE HOLDING ROCK BREAKING WEDGE POPPED UP & STRUCK EE ALONG BRIDGE OF NOSE. EE WA WEARING SAFETY GOGGLES.

AS REPORTED BY EMPLOYEE (NEXT DAY, DID NOT REPORT TO SUPERVISORS OR WORKERS ON DATE OF ACCIDENT>

WAS WORKING NEAR SCREENING PLANT AND A ROCK BOUNCED OFF AND HIT HIM ON THE SHOULDER. HE DID NOT GO TO THE DR. UNTIL 6-12-97. DIDN'T THINK HE WAS HURT ENOUGH. BUT LATER GOT NUMB IN HAND.

WORKING WITH A WEDGE THAT WAS ATTACHED TO A BAR KICKED BACK CAUSING THE BAR AND CHAIN TO BE KNOCKED OUT OF HIS HANDS AND IT HIT HIM IN THE CHEST AND BRUISED HIS CHEST.

HE HAD WELDING GLOVES ON AND HE WAS CUTTING THE BURN RING ONTHE CRUSHER WHEN HE WAS THRU HE SEEN THAT HE HAD A BLISTER ON HIS KNUCKLE. HE SELF TREATED IT BUT IT GOT INFECTED SO HE HAD TO GO SE E A DR.

EMPLOYEE WAS ON CONVEYOR BELT CARRYING A PORTA POWER OVER THE BELT SHAFT, WHEN HE FELL, HIS FOOT SLIPPING UNDER MOTOR, & HIS ARM HITTING THE MOTOR. HE SPRAINED HIS FOOT & WRIST.

WAS TRYING TO UNPLUG CONVEYOR BELT AND FINGER GOT CAUGHT BY SHIEVE AND CUT THE END OFF OF FINGER.

BAXTER SAW WAS PLUGGED UP WITH ROCK. DON WAS TRYING TO GET ROCKS LOOSE. WHEN THEY LOOSENED UP, HE SLIPPED INTO CRUSHER, FROM WHERE HE WAS SITTING. HE GOT A SMALL BURN ON LEFT ARM AND BRUISE S TO HIS RIGHT LEG AND FOOT. HE HAD A SMALL BONE IN THE RIGHT LEG BROKEN - BUT NO CAS WAS PUT ON.

WAS HAMMERING A ROCK OUT OF A VGF FEEDER GRIZZLY BARS WHEN A PIECE OF METAL FLEW UP, AND HIT ARM, CUTTING IT ABOUT 1/2" LONG.

WAS HELPING TO UNPLUG JAW CRUSHER. WHEN A ROCK HIT HIS FINGERS.

WAS REPAIRING ON CRUSHER HELPING THE WELDER WHEN HE SLIPPED & H IT HIS ARM ON SOME STEEL

WAS PLACING A PIECE OF STEEL IN VGF FEEDER IT FELL AGAINST HIM AS IT WAS LOWERED IN TO PLACE.

WAS TRYING TO GET TRANSFER TRAILER TO TRANSFER INTO TRUCK. HE WAS HOLDING UP SOEM PART OF TAIL GATE, WHEN BOX HIT HIS HAND, AS IT.

WAS WORKING ON ELECTRICAL SYSTEM OF GENERATOR WHEN FELL AND HIT ARM ON BOLT EDGE AND CUT ARM.

WAS GETTING OFF D-9 DOZER AND SLIPPED AND FELL TO GROUND HITTING LEFT SIDE AND BACK ON SERVICE TRAILER.

WAS SHOVELING SAND FROM UNDER FEEDER AND BACK STARTED HURTING.

GETTING ROCK OU7 OF JAW AND ANOTHER ROCK SLIPPED AND HIT FINGER.

WAS WELDING & H9 KNOCKED THE TIP, TO KNOCK SLAG OFF & THE TORCH BACK FIRED & BURNED HAND.

LIFTED SCREEN T2 CARRY IT ON HIS BACK.