Buscar en el registro

Incident occurred at night with light rain condition. Employee's foot slipped while climbing wheeled loader ladder. Employee strained right shoulder when he started to fall. Employee worked with some pain from 3/23/10 until 4/12/10. On 4/12/10 he was seen by medical service, diagnosis rotator cuff strain. on light duty 4/12/10.

An employee sustained injuries when he was cutting a scrap grizzly. The employee was struck on the side of his head (fractured bone) when a section of steel he was cutting de-stressed and pivoted upward with the sideboard. Another section of steel landed on the top of both of his feet. (both feet had lacerations). More detail to be ammended to this report.

On the day of the injury, the employee was at the site early to start equipment up for the start of the shift. He had just started the D5 Dozer and was attempting to egress it, when his right foot slipped off of the equipment provided step. His left foot made contact with the ground and twisted, as a result, a bone in his left ankle was broken. (sprained not broken per MM)

Clear, dark conditions: got loaded with coal and had a problem with the tarp. The tarp is manually operated and the driver climbed up to untangle the tarp rope. When the tarp untangled, driver lost his balance and fell against the trailer in the coal. No initial medical treatment but placed on restricted duty on 1/7/08.

Cutting a piece of rope and utility knife slipped and cut hand.

The employee reported that he had been working on a silt pan. He exited the pan by climbing over the side. Upon exiting he felt a strain in his back. On 11/21/05 employee visited a physician who believed he had a pinched cyatic nerve. It wasn't reported until 11/21/05

BEFORE DAWN, BUT IN A LIGHTED AREA WITH COOL TEMPS. AND LIGHT RAIN. AFTER THE WALKAROUND INSPECTION THE OP. MOPUNTED LADDER AND OPEN CAB DOOR. AS DOOR OPENED OP. SWUNG BACK AND SLIPPED OFF THE LOWEST STEP. HE FELT SOME PAIN IN HIS RIGHT FOOT.

CLOUDY,FREEZING RAIN CONDITIONS. WHILE EE WAS CLEANING THE WINDSHIELD ON THE DRAGLINE (STANDING ON THE DECK) WHEN HE TURNED TO HIS LEFT USING 3 POINT CONTROL TO GET IT MORE PAPER TOWLES USING LEFT FOOT SLIPPED OUT FROM UNDER HIM & FELL ON HIS LEFT SIDE BREAKING HIS LEFT HAND

THIS INCIDENT WAS NOT REPORTED BY THE EE UNTIL 2/6/01. EE WAS COMING DOWN A FIXED LADDER WHEN HIS HANDS SLIPPED OFF LADDER & FELL BACKWARDS 2 FTFROM GROUND AND LANDED ON RIGHT HIP. EE DID NOT REPORT INCIDENT UNTIL 2/6/01 WHEN EE STARTED TO HAVE BACK PAIN. AT THIS TIME INVESTIGATIONS IS BEING CONDUCTED TO DETERMINE WORK RELATED

EMPLOYEE HAS BEEN EMPLOYED WITH PG&E OPERATING SERVICES COMPANY FOR FIVE YEARS AS A EQUIPMENT OPERATOR AND HAS BEEN AN EQUIPMENT OPERATOR FOR 18 YEARS. EMPLOYEE UNDERWENT CARPAL TUNNEL SURGER Y TO HIS RIGHT HAND ON 1-09-01. AN INVESTIGATIONHAS BEEN STARTED. THIS HAS NOT BEEN DETERMINED WORK RELATED AT THIS TIME.

A DRAGLINE BUCKET WAS LAID ON ITS SIDE TO BE WELDED ON; EMPLOYEE MOVED THE BUCKET CHAINS AND FELT A PAIN IN HIS LOWER BACK AS HE BENT OVER TO ENTER THE BUCKET WORK AREA.

EMPLOYEE WAS HOLDING A NUT WITH HIS RIGHT HAND, ANOTHER EMPLOYEE WAS TIGHTENING THE BOLT WITH ANIMPACT WRENCH. THE NUT DISLODGED FROM A FIXED BAR, THE BOLT AND NUT TURNED PINCHING THE EMPLOYEE 'S RIGHT INDEX FINGER OFF BETWEEN THE NAIL BED AND THE FIRST KNUCKLE.

EE OPENED THE DOOR TO THE OFFICE TRAILER AND STEPPED ONTO THE PLATFORM. HE STARTED TO CLOSE DOOR AND SLIPPED ON ICE AND FELL DOWN THE STAIRS, FEET FIRST. THE EE HIT HIS HEAD, RIGHT ELBOW AND R IGHT RIBS ON THE BACK ON THE WOODEN STAIRS.

EMPLOYEE STEPPED OUT OF A SUPPLY TRAILER ONTO A ROCK AND TWISTED HIS LEFT ANKLE.

EE WAS CUTTING A STEEL HUTCH COMPARTMENT INTO SMALL PIECES FOR REMOVAL. WHILE MAKING THE FINAL CUT ON A 3'X3' PIECE OF 3/8" STEEL, THE PIECE SWUNG OUT AND ROPPED. THE METAL IMPACTED THE EE'S L EFT FOOT CUTTING THROUGH HIS BOOT AND CUTTING THE FOOT.

WHILE DRIVING A 773 HAUL TRUCK. THE EE HIT A LOW SPOT IN THE ROAD WHICH JARRED HIM SUDDENLY CAUSING SEVERE PAIN TO HIS SORE BACK.

WHILE TIGHENING A BOLT ON A SCREEN PANEL, THE WRENCH SLIPPED HIS MOMENTUM CARRIED HIM FORWARD AND HIS RIGHT THUMB STRUCK THE SCREEN STRUCTURE BREAKING THE THUMB AT THE 1ST JOINT

WHILE CLIMBING INTO SUMP 17B TO TAKE MEASURMENTS OF DISCHARGE PIPING, EMPLOYEE LACERATED HIS RIGHT ARM. AFTER PERFORMING THE TASK THE EE WAS CLIMBING OUT OF THE SUMP. HE CUT HIS LEFT KNEE ON T HE SAME PIECE OF STRUCTURAL STEEL.

INJURED WAS REMOVING A GASKET FROM THE OIL PAN OF A D8N DOZER WITH A SCRAPER WHEN THE GASKET GAVE WAY HIS HAND STRUCK THE SUMP SCREEN FOR THE OIL PUMP, CUTITNG HIS RIGHT HAND INDEX FINGER. HE RECEIVED 6 STITCHES TO CLOSE THE CUT.

EMPLOYEE WAS REMOVING A MOTOR FROM UNIT 53 AL IN THE PREP PLANT. THE POWER SOURCE WAS LOCKED AND TAGGED OUT BUT NOT WITH EMPLOYEE'S LOCK. THE PLANT OPERATOR WAS CALLED AND TOLD TO ENABLE THE M IX STATION WHICH THE MOTOR IS A PART OF. THE OPERATOR REMOVED HIS LOCK & RESTORED POWER. EMPLOYEE WAS REMOVING JUNCTION BOX. THE RESULANT ARC CAUSED FLASH BURNS TO HIS EYES AND A BURN TO HAND

RAINING POSSIBLE HYDRAULIC OIL ON SHOE SOLES WHEN HE SLIPPED ONTO A STEEL GIRT FROM STAIRS.

USING A PIPE WRENCH AND A VICE TRYING TO LOOSEN A PIECE OF PIPE FROM A FITTING. THE WRENCH SLIPPED AND CAUGHT AGAINS. WRENCH HANDLE CAUGHT IN LEFT ARMPIT, CHEST AREA. THE END RESULT WAS A FRAC TURE OF 3RD LEFT RIB. INJURY WAS NOT REPORTED UNTIL 9-22-97 BECAUSE EE THOUGHT HE HAD ONLY BRUISED HIMSELF.

EMPLOYEE WAS INSTALLING PIPING INCLUDING WELDING, BURNING AND GRINDING, AFTER WORK ABOUT 6:30 PM, HIS LEFT EYE STARTED TO BOTHER HIM. EMPLOIYEE REMOVED PARTICLES FROM THE EYE AND IT FELT BETTE R. THE NEXT DAY HE OBSERVED A RUST RING ON EYE.

EE FELL FROM THE THIRD RUNG UP ON A 10' STEP LADDER & STRUCK HIS ELBOW ON A REEL OF WIRE THAT WAS ON THE FLOOR.

EMPLOYEE WAS USING A CHIPPING HAMMER IN HIS RIGHT HAND TO CHIP OFF THE TOP OF A CHUTE. A PIECE OF STEEL (SPALL) CAME OUT OF THE HAMMER AND STRUCK HIS LEFT THUMB.

AFTER SECURING THE BELT PRESS SPRAYS, EE WAS WALKING AWAY FROM THE PRESS AREA. WHEN HE STEPPED ON THE REMOVABLE COVER FOR 17A SUMP [DECK PLATE, APPROX. 33" SQ.]. THE COVER TIPPED. EE FELL INTO THE SUMP & THE CORNER OF THE COVER PLATE BROKE HIS FALL, INJURING HIS RIGHT CHEST.

WHILE ATTEMPTING TO DISASSEMBLE A 1-1/2" PIPE UNION, EE WAS TRYING TO BRACE THE END OF A PIPE WRENCH ON A PUMP BASE TO PREVENT IT FROM TURNING. AT THE SAME TIME A MECHANIC TURNED ON ANOTHER WR ENCH, FORCING EE'S RT INDEX FINGER BETWEEN THE WRENCH HANDLE AND THE PUMP BASE.

CLEANING THE TRACKS ON A D5H-LGP CAT DOZER WITH AN APPROVED TRACK CLEANING SHOVEL AND GLOVES ON HANDS. PUSHING A CHUNK OF MUD AND MUD GAVE WAY SUDDENLY. LEFT RING FINGER TIP HIT THE TRACK ROLL ER. FINGERS WERE STRAIGHT ON LEFT HAND. RIGHT HAND FINGERS WERE CLOSED AROUND THE D HANDLE OF SHOVEL. PAIN DEVELOPED IN BACK OF HAND. LEFT HAND.

INJURED WAS WASHING DOWN IN PLANT USING AN 1-1/2 IN FIREHOSE. HE PULLED AGRESSIVELY ON THE HOSE AND HE HIT HIS LEFT ELBOW ON THE HAND RAILING. RECEIVED A CONTUSION LFT ELBOW.

AFTER MEASURING THE LEVEL OF SLUDGE IN THECLAIFIER, HE TURNED TO WALK BACK INTO THE PLANT WHENHIS LEFT LEG SLIPPED OUT FROM UNDER HIM AND HE FELL TO THE GRATING LANDING ON HIS RIGHT HIP.

OPERATOR WAS GREASING LEFT UPPER HOIST CYLINDER FROM FENDER. HE REACHED UNDER A STEP BELOW HIM TO GET A NEW GREASE CARTRIDGE. SLIPPED AND FELL OFF MACHINE. HIS FOOT CAUGHT WHILE FALLING CAUSI NG HIM TO FALL ON HIS HARD HAT WHICH PUSHED HIS SAFETY GLASSES ONTO THE BRIDGE OF HIS NOSE, CUTTING HIS NOSE.

WHILE WALKING UNDER A LEAKING WATER VALVE. ON FLOOR GRATING HE SLIPPED, REACHED OUT TO THE HANDRAIL BUT MISSED IT AS A RESULT HE CAUGHT HIMSELF WITH HIS LEFT ARM PIT.

DO NOT KNOW HOW INCIDENT HAPPENED. EE REPORTED AT 6 AM 3-29-96 THAT STIFFNESS WAS NOTICED SHORTLY AFTER HE GOT HOME. HE DID A LOT OF MANUAL LABOR ON 3-28-96. INCLUDING SWINGING A SLEDGE HAM MER AND MOVING 55 GAL DRUMS.

WHILE FEELING FOR AN AIR LEAK ON AN AIR CYLINDER, EMPLOYEE'S ATTENTION WAS DIVERTED. THE VALVE ACTUATED AND HE CAUGHT HIS FINGER BETWEEN TWO PIECES OF STEEL. REMOVED TISSUE FROM MIDDLE FINGER RIGHT HAND. CLOSE TO THE BONE.

HE WAS IN THE PROCESS OF LIFTING A SIEVE SCREEN FOR REPLACEMENT IN UNIT 18B. HE FELT A PAIN IN HIS BACK, BETWEEN HIS SHOULDER BLADES.

WHILE REPLACING A HYDRAULIC FILTER ON A CAT 988F FRONT END LOADER, THE FILTER WRENCH SLIPPED. THE MOMENTUM CARRIED EMP INTO A METAL BRACKER IN THE ENGINE COMPARTMENT. IN THE PROCESS, HE BRUISE D HIS RIB CAGE, RIGHT SIDE.

WHILE WALKING ACROSS AN ICY AREA BETWEEN UNTI 38 AND UNTI 42S, EE STEPPED THROUGH THE ICE, FELL FORWARD AND HIT HIS KNEE, IMMEDIATELY BELOW THE PATELLA, ON THE ICE.

WHILE SUPERVISING SCREEN CHANGES EE RECEIVED WELDERS FLASH BURNS TO LEFT EYE.

WHILE USING A 4 1/2" ANGLE GRINDER, THE GRINDER WHEEL HIT A ROUGH SPOT AND JUMPED UP AND CUT EMPLOYEE' LEFT THUMB.

USING A SLATE BAR TO DIG MATERIAL OUT OF A PARTIALLY PLUGGED CHUTE EMPLOYEE EXPERIENCED BACK AND NECK PAIN.

ADDING CAUSTIC SODA MIX WATER FOR FLOCCULANT. THE WELL WATER WAS CONTAMINATED IN THE PLANT AND THE PH WAS ELEVATED TO ABOUT 12. EMPLOYEE WAS HOSING IN PLANT AND RECEIVED BURNS ON HIS ARMS AND FACE. AN ADDITIONAL CHECK VALVE WAS INSTALLED TO PREVENT OCCURANCE OF THIS PROBLEM.

ONE OR MORE DROPS OF CAUSTIC APPARENTLY LEAKED FROM A DEFECTIVE FITTING AND ACCUMULATED AT A BEND IN THE FEEDER LINE. THE EMPLOYEE APPARENTLY BUMPED THE LINE AND HAD CAUSTIC FALL ON HIS SHIRT.

WHILE CUTTING CONVEYOR BELTING, THE EMPLOYEE WAS DRAWING THE KNIFE TOWARD HIMSELF. AS HE NEARED THE END OF THE CUT, THE KNIFE CAME OUT OF THE BELTING AND THE BLADE CUT HIS WORK CLOTHING AND LE G.