Buscar en el registro

While lubricating bearings in the dryer area, the mechanic activated the mechanism catching his wrist between the vibrator rolls.

Stepping down from loader hit his right elbow with piece of metal and cut himself.

While stepping down the stairway of the truck he slipped and fell down on his back, hitting his back and small finger of the right hand.

Foreing body in unhibtial cored-due to working in the batch house.

While unloading a caterpillar D-6 from platform, employee slipped, falling sideways. The miner was inside the cab.

WHILE INSPECTING THE SPIRALS OF THE WASHER MACHINE THE SPIRAL WAS JAMMED WITH SAND, HE PULLED THE WATER HOSE TO FLUSH IT WHEN HIS FEET BECAME TRAPPED IN THE WATER HOSE. HE LOST HIS BALANCE AND WHILE FALLING WAS ABLE TO GRAB A SIDE LADDER. HIS LEFT FOOT GOT CAUGHT BETWEEN THE LADDER AND THE SPIRAL AND SPRAINED HIS LEFT KNEE,LEG AND INJURED HIS LOWER BACK AND HE HIT HIS LEFT ARM. HE

THE LOADER BRAKES HAD BEEN FIXED. A LEAKAGE OF BRAKE FLUID CONTINUED AND THE MECHANIC WAS CALLED TO FIX IT. THE OPERATORS WERE DOING THE INSPECTIONS AT THE BEGINNING OF EACH SHIFT AND ADDING T HE NECESSARY BRAKE FLUID. THIS OPERATOR DID NOT MAKE THE BEGINNING INSPECTION AND THE EQUIPMENT RAN OUT OF BRAKE FLUID CAUSING THE BRAKE FAILURE.

WAS MOVING A SAW HORSE AND STRAINED HIS BACK WHEN HE MOVED IT.

WAS KNEELING ON FLOOR DOING SOME WIRE HOOKUP WHEN HE GOT UP SOMETHING PULLED IN LOWER BACK. TOOKMUSCLE RELAXER TO GET BACK IN SHAPE. TOOK NEXT DAY OFF AS SICK DAY

HAD A METAL BOX ON SAWHORSES AND WAS TRYING TO ROLL IT OVER AND GOT A STRAIN INLOWER BACK AREA.

SLIPPED OFF A PIPE WHILE PULLIING ON A WRENCH RETD TO WORK WITH 10LB LIFTING LIMIT UNTIL REPAIRED BY SURGERY Y

WAS MOVING A BOX OF WELDING ROD & FELT SOMETHINGPULL IN GROIN AREA. WAS PUT ON WEIGHT LIFTING LIMIT OF 10LBS UNTIL SURGERY

LIFTING A PUMP & STRAINED STOMACH. HAD A 20LB WEIGHT RESTRICTION FOR 2 WKS

SCREWING SHEET METAL TO SIDE OF MILL, DRILL MOTOR CAUGHT FINGER.

LIFTING MAG ROLL AND TWISTED TO HAND TO ANOTHER PERSON AND STAINED LOWER BACK. 5 WEEKS THERAPY.

POURING CEMENT & TWISTED BACK. HAD TO GO TO THERAPY FOR 2 WKS.

THE SAND WAS ADHERED TO THE SILO'S WALLS. THE EE, WHO HAD A PREVIOUS BACK CONDITION, WAS HAMMERING THE WALLS OF THE SILO TO LOOSEN THE SAND. THE HAMMER WAS OF APPROSIMATELY 10 POUNDS.

WORKER WAS WALKING TO JOB SITE WHEN HE STRUCK HIS HEAD ON LOW HANGING PIPE.

WORKER WAS REMOVING FLASHING WHEN IT BROKE LOOSE AND STRUCK HIM ON THE HAND.

EMPLOYEE WAS REMOVING PARTICLES FROM THE SAND WITHOUT SEFETY GLASSES. THREW A STONE AND THE SAMEBOUNCED BACK HITTING HIS RIGHT EYE CAUSING A BRUISE IN THE AREA.

THE EMPLOYEE WAS CLEANING THE CONVEYOR'S BELT, REMOVING THE EXCESS OF SAND IN THE DRYER MACHINE. THE GLOVE OF THE RIGHT HAND WAS TRAPPED BETWEEN THE BELT AND THE ROLLERS. WHEN HE PULLED BACK H IS HAND, HE INJURED HIS RIGHT ARM WITH THE FRAME OF THE CONVEYOR, CAUSING A THREE STITCHES LACERATION AND A SMALL ABRASION.

BEARING PULLER SLIPPED STRIKING EE ON THE FOREHEAD RESULTING IN 6 STITCHES.

REPEATED SAME MOVEMENTS. LEFT AND RT ELBOWS POP AND HURT ALL OF THE TIME.

RT ELBOW HAS BEEN BUMPED AND STRAINED OVER THE POST 7 YEARS ELBOW IN PAIN ALL THE TIME.

EE CALL IN ON 04-30-94 REPORTED HIS BACK HAD A STEADY PAIN & WSENT TO HOSPITAL ER ON 04-29-94 WANTED TO SEE COMPANY DOC ON 05-02-94

STEPPED INTO A HOLE WHILE WALKING.

OPENING 6IN DRAIN VALVE

EMPLOYEE WAS STEPPING DOWN FROM THE TRACK TO THE DOZER BLADE ARM. AND MISSED IT AND CONTINUED ON TO THE GROUND.

EMPLOYEE STATES THAT WHEN HE WAS GOING TO PAYLOADER TO TAKE OUT GARBAGE FROM CRAP CONVEYOR HE SLIPPED ON THE FLOOR AND FELL.

EE WAS STEAM CLEANING A DRILL WITH LIMESTONE DUST AND SMALL ROCKS ON IT. HE WAS IN THE OUTDOORS AND HAD RAIN PANTS AND TOP WITH GLOVES ON. HE DID NOT HAVE A FACE SHIELD ON EE MAY BE ALLERGIC T O CLEANER USED.

IN THE PROCESS OF CLEANING THE SAND FOREIGN MATERIALS HAD TO BE R EMOVED WHILE REMOVING A STONE OF ABOUT 65 POUNDS FROM THE DEPOSIT IN THE WASHER MACHINE THE EMPLOYEE FELT PAIN IN THE LOWER BA CK AREA

THE PIT STATION (BLUNGER) HE WAS WALKING ON LOWER LEVEL OF PIPE STATION ENROUTE TO STAIRWAY, FOOT SLIPPED ON PARTIALLY DRIED SLURRY MATERIAL.

PULLING LEVERS ON A CABLE SHOVE. RESULTED IN A HERNIA. HAD SURGERY ON 7-17-90. LOST TIME

THE EMPLOYEE WAS WORKING IN THE SCREW CONVEYOR. HE WAS INSTALLING THE SCREW TO THE GEER REDUCTOR USING A 36 INCH PIPE WRENCH. THE PIPE WRENCH SLIPPED DOWN AND HIT HIS FINGER.

HE WAS PRYING A ROCK JAM FROM CURHSER JAW WITH A PRY BAR. THE BAR SLIPPED AND EMPLOYEE FELL AGAINST AN I BEAM.

THE EMPLOYEE WAS GRINDING A STEEL PLATE WITH A HAND GRINDER AND A STEEL PARTICLE GOT INTO HIS EYE (LEFT). HE WAS USING SAFETY GLASSES INSTEAD OF THE SAFETY GOGGLES PROVIDED FOR THAT TYPE OF JO B. IT RESULTED IN 16 MANHOURS LOST TIME.

HE WAS HOLDING METAL DOWN UNDER PRESSURE WITH A BAR TO BEWELDED, THE FLASH OCCURRED WHEN THE WELDING ARC REFLECTED OFF THE INSIDE OF THE DRYER CHAMBER.

WHILE OPENING BOTTOM GATE ON BIN #4 WITH GATE TOOL HE SLIPPED & RIGHT HAND HT GATE SUPPORT STRUCTURE & INJURED HAND.

SLIPPED ON WET FLOOR OF MILL, FLOOR HAS SLOPE FOR WATER DRAINAGE. CHECKING WITH TWO HOURLY EMPLOYEES IN BASEMENT OF WET MILL, WHILE THEY WERE WORKING ON WATER BOOSTER PUMP.

PULLING ON JAMMED ROCK ROCK BECAME FREE, EMP SLIPPED ON GRATING

PREVIOUS BACK INJURY WAS CAUSING PAIN.

OVERSIZE ROCKS ... EMPL REMOVING CHAIN FROM ROCK WHEN IT SLID AGAINST HIM PINNING HIM AGAINST STEEL COLUMN.

HIT ELBOW ON PIECE OF METAL THAT EXTENDED FROM LOADER BUCKET.

EMPLOYEE STATES THAT WHILE HE WAS IN A SQUATTING POSITION TIGHTENING SCREWS OF A MACHINE WHEN HE WENT TO STAND UP ERECT HE COULDN'T DO IT IMMEDIATELY AND FELT PAIN IN HIS BACK (MIDLINE) ALSO PAIN IN HIS RIGHT LEG

EMPLOYEE STATES THAT UP ON OPERATING OVEN, SMALL EXPLOSION OCCURRED IN WHICH HE INHALED SMOKE. HE HAD DIFFICULTY BREATHING, CHEST PAINS, DIZZINESS AND LATER VOMITED.

REMOVING BEARING RACE FOR 10" PUMP SHAFT, APPLYING HEAT WITH TORCH USING 3 1/2 LB HAMMER A SLIVER OF STEEL LODGED IN LEFT SIDE OF BODY, JUST UNDER ARM.

STEPPING OUT OF DRILL HE STEPPED ON A ROUND ROCK AND TWISTED HIS RT ANKLE.

WHILE WORKING ON THE NWG DROP BALL HE REACHED UNDERNEATH RO REPLACE THE LOWER RADIATOR HOSE AND SLIPPED ON THE DECK AND HURT HIS FOREARM, ELBOW, SHOULDER.

EE TRIPPED OVER3METAL GRETE WHILE WALKING TO MOTORCYCLE AT THE END OF HIS SHIFT.

WALKING DOWN A WALKWAY SURROUNDED BY HAND RAILS THE EMPLOYEE TURNED THE CORNER ON THE WALKWAY AND BUMPED HIS LEFT ELBOW ON THE END OF THE HAND RAIL.