Buscar en el registro

EE KNOCKED THE POWER TO THE CONTINOUS MINER CONTROL PANEL. HE REMOVED THE PANEL COVER TO HAVE ACCESS TO THE P.CT. RELAY. HE WAS LOOKING AT THE RELAY TO DETERMINE THE TOOLS NEEDED TO CHANGE THE RELAY. AS HE EXAMINED THE RELAY A FLASH OCCURRED CAUSING A BURN TO HIS LEFT HAND.

UNIT 1 HAD A BAD BATTERY ON THE 3 WHEELED UNIT WORK JEEP. THE MECHANIC WAS CUTTING OUT. THE BAD BATTERY & DROPPED THE LOOSE GROUND LEAD AGAINST A HOT LEAD. THE SPARKS CAUSED 2 BATTERIES TO BLOW UP, ACID WAS SPRAYED IN THE FACE & EYES OF THE MECHANIC. BOTH EYES WERE FLUSHED FOR 45 MIN. SLIGHT BURN IN RIGHT EYE NO PERMANENT DAMAGE.

INJURED STATED HE THOUGHT THE POWER HAD KNOCKED ON THE SHUTTLE CAR. WHEN HE PICKED UP THTE CABLE THE CABLE BLEW UP AT A SPLICE BURNING HIS LEFT HAND.

EE STATED HE WAS WORKING ON 6 BOLT BATTERY FOR TRACTOR WHEN BATTERY EXPLODED CAUSING BURNS TO BOTH EYES.

REMOVING BATTERIES FROM GOLF CAR AND A BATTERY BLEW UP IN HIS FACE.

MAN WAS MAKING ELECTRICAL REPAIRS TO THREE WHEELER BATTERY PERSONAL CARRIER WHEN A BATTERY EXPLODED.

WAS TROUBLE SHOOTING CUTTER PANEL THAT THAD JUST BEEN PUT IN SERVICE. EMPLOYEE TOLD EE TO KNOCK THE BREAKER ON MACHINE. HE ONLY KNOCK ONE BREAKER ON MACHINE. WHAT WAS NECESSARY WAS TO KNOCK AN ADDITIONAL BREAKER TO THE CUTTING MOTOR CONTACTORS. THERE IS A SIGN BY BREAKERS STATING TO TURN OFF BOTH BREAKERS. EE ASSUMED POWER WAS OFF, REACHED IN AND CONTACTED ALIVE CONDUCTOR.

CHANGING TOOTH ON DRAGLINE BUCKET LIGHTENING BHIT BOOM HE REC ELECT CHARGE

OUR MINING ENGINEER WAS ASSISTING THE MASTER ELECTRICIAN WHILE CHECKING OUT AN ELECTRICAL CIRCUIT WITH A METER WHEN THE METER AND ITS CABLES UNEXPECTEDLY THREW OUT FIRE BURNING THE ENGINEERS H AND AND ARMS.

EE WAS CHECKING VOLTAGE ON A BREAKER IN THE 150 POWER BOX WHEN IT BLEW UP.

MAN WAS DISCONNECTING THE CHARGER PLUG (CATHEAD) FROM THE RIGHT ROOF BOLTER RECEPTACLE. WHEN HE KNOCKED THE BREAKER BOX TO DE-ENERGIZE THE PLUG, HE APPARENTLY KNOCKED THE DRILL BOX BY MISTAKE. HE THEN DISCONNECTED THE CHARGER PLUG (UNDER LOAD) CAUSING AN ARC.

EMPLOYEE RESTED HIS LEFT ARM ON PLATER COVER OF LINE STARTER THE PLATE COVER FELL INTO POWER LEAD CAUSING AN ELECTRICAL FLASH BURNING EMPLOYEES ARM

WHILE MAKING A BELT & POWER MOVE ON 001-0 SECTION THE EMPLOYEE WAS HOLDING A BELT ROPE (WIRE CABLE) WHEN THE POWER WAS ENERGIZED HE WAS SHOCKED STRAY CURRENT CAME BACK THROUGH THE BELT ROPE

EMPLOYEE RECEIVED ELETRICAL SHOCK TO HIS LEFT HAND FROM BAD SPLICE IN MINER CABLE.

EMPLOYEE STATED HE WASMOVING MINER CABLE AND GOT HOLD OF A WIRE IN A CUT PLACE.

MINER SPLICING ELEC CABLE.KNOCKED WRONG CATHEAD AND LOCK IT OUT.WHEN EMPL CUT INTO CABLE OF OTHER SC ON SECTION.

INJ CHANGED OUT TRANSFORMER FOR SPARE MINER DOOR.CHANGED THE ENTIRE CARD AND TRANSFORMER WAS WIRED BACKWARDS ON BOARD.WHEN HE CLOSED MAIN BREAKER THE TRANSFORMER BLEW UP WITH RESULTANT ARCING. IN POWER CENTER.

WHILE DRIVING SCOOP DOWN TRACK AT 58 BREAK SCOOP CANOPY HIT 7200 CABLE SPARKS WERE FLYING INTO DRIVERS COMPARTMENT WHILE TRYING TO GET OFF SCOOP HE HIT HIS KNEE ON OPERATORS CAB.

MAN WAS WORKING3ON POWER CENTER AND CIRCUIT WAS ACCIDENTLY ENERGIZED.

WHILE ATTEMPTIN1 TO DEENERGIZE PTW-4 4160 TRANSFER SWITCH WHEN UNDER LOAD AND ARC OCCURED,INSTANTLY TURNING THE SWITCH HANDLE RED HOT, THUS BURNING THE WORKERS RIGHT RING AND LITTLE FINGER (1S T AND 2ND DEGRE9 BURNS)FROM THE END OF FINGERS TO THE 1ST JOINT.

MAN WAS PUTTING3SUPPLY MOTOR ON CHARGER & LEAD BLEW UP IN HIS HAND.

HE AND ANOTHER 9MP. HAD BEEN WORKING ON STARTER, WERE ON TOP OF REFUGE BLDG AT M AIN STEPDOWN TRANSFORMER. HE SAID THAT HE OPENED DOORS TO CHECK FUSES, TURNED AROUND AND POINTED TOWARD THE FUS ES. HE WAS EXPL5INING TO OTHER EMP. THAT YOU DID NOT GET CLOSE TO THOSE FUSES. HE HAD TEST LEADS IN HIS HAND BUT DID NOT TOUCH FUSES WITH LEADS. AND THERE WAS AN ARC FROM FUSES CAUSING HIS IN

EMPLOYEE STATED HE WAS STANDING TO THE RT OF THE AIR COMPRESSOR STARTER BREAKER WAS TROUBLE SHOOTING AIR COMPRESSOR STARTER A PHASE LEAD BLEW INTO CAUSING A FLASHOVER

HE WAS HOLDING A PIECE OF METAL AGAINST SIDE OF HOIST MODULE, WHILE ANOTHER WELDER WAS GOING TO TACK WELD IT IN PLACE. THE WELD LEAD WOULD NOT REACH SO THE WELDER TURNED AROUND TO PULL SOME BL XX SLACK AND WHEN HE TURNED BACK AROUND HE STRUCK HIM IN THE TEMPLE WITH THE WELDING ROD, HE WAS HOLDING ONTO METAL WITH HIS HANDS AND THIS ALLOWED CURRENT TO GO THROUGH HIM.

EMPLOYEE WAS TROUBLE SHOOTING CONTROL CIRCUIT FOR EXCITER START. HE REACHED OVER TOP OF TRANSFORMER TO FEEL WINDINGS TO SEE IF THEY HAD OVER HEATED. HIS HAND CONTACTED 480 VOLTS, ALSO HE STRUC K BRACE ON ELECT. PANEL CAUSING A LACERATION

EMP STATES EMP WAS AT THE DRAGLINE HE WAS STONEING AN ARMATURE TO SEAT NEW BRUSHES THE ARMATURE STARTED TURNING TOO FAST CAUSING IT TO FLASH

RONNIE BOOTH, SHUTTLE CAR OPERATOR IN THE 007-0 SECTION WAS TALKING WITH SECTION REPAIRMAN NEAR 750 KVA POWER CENTER WHEN THE CONT. MINER BREAKER ARCED CAUSING FLASH BURNS TO EMPLOYEES HANDS, FACE, ARMS AND NECK. SECTION REPAIRMAN WAS PUTTING BREAKER ON THE ENERGIZE CONT MINER WHEN IT ARCED.

WHILE PUTTING BREAKER IN TO ENERGIZE THE NO. 007-0 SECTION CONT. MINER, THE BREAKER ARCHED CAUSING FLASH BURNS TO THE EMPLOYEES RIGHT ARM, FACE, NECK AND LEGS.

TERRY WAS CHECKING PINNER CABLE WITH A VOLTMETER & TOUCHED CABLE TOP TURN IT OVER. WHEN HE TOUCHED A BAD PLACE ON CABLE GIVING HIM AN ELECTRICAL SHOCK. HE FELL BACK HITTING HIS HEAD ON A 3-WH EELER.

EE WAS EXAMINING A SPLICE IN A BUGGY CABLE WHEN IT BECAME GROUNDED BURNING HIS RIGHT HAND WRIST Z& ARM.