Buscar en el registro

The employee was loading a scrap metal plate into a loader bucket. While the plate was being loaded, it slid out of the bucket and cut the lower left leg.

EE was thawing a pipe when it released and swung back. The water that came from the pipe knocked EE down. EE braced self with hands upon falling and jolted right shoulder.

EE was moving full barrels when one slipped. EE went to catch the barrel and felt a pull in groin and abdomen areas.

Lifting a rock from the road and felt a pain in back, same area from previous work injury.

while fueling machinery, employee slipped on a rock/hole and fell twisting lower back and right ankle

Employee was climbing ladder of a WA800 wheel loader while carrying a fire extinguisher. Employee felt a pull in right arm resulting in a strain and then banged right leg against the loader resulting in a contusion.

During repair to coal vessel, employees hand was pinched between flange & coal chute.

Lift parts into a pickup truck. Lifted large bearing and felt pain in back.

While cleaning up scrap steel employee felt sharp pain above belly button. (Date of surgery 11/8/17 - first missed work day)

Pulling hose off fuel truck, felt sharp pain above navel . First day off work is 8/4/17

Welder shut off. Checked fluid levels to see the reason. Burned with the radiator fluid.

Changing screen on Findley & twisted knee - no lost time until 7/20/16.

Removing rear axle from Mack Dump Truck - axle dropped crushing lt hand between it & truck frame.

Installing 14 inch plastic pipe. Pushed on pipe and felt pain/heard pop.

Stemming drill holes - shoveling rock w/shovel. Experienced pain in low back.

Employee was installing new backs on air ride seat. Felt sharp pain in back when lifted seat up.

Employee was opening a door on the fines conveyor to unplug the chute. When he took the bolts out of the door the material pushed the door open and pined him between the door and the handrail.

Employee was lifting shovel cable & later exp pain & swelling in both hands.

Employee was pulling 6" pump hose across uneven ground.

Removing belt & keeper with air gun

Removing jam from Extec S-5 portable screening plant-struck on head by rock

Employee was removing skirting of Femco crusher for cleaning/maintenance and felt pain in back and hips.

Employee lifting hammer/drill from truck. Hammer and drill bit slide inside one another. Employee lost hold of equipment and hammer slid pinching his right index finger.

Lifting ladder on PC felt sharp pain in low back

EE was hoisting 2 wet coal screws off groung & caught finger in between.

Rolling large rock off haul road and felt pop in right shoulder.

Two employees were trying to untangle a 200' length of 1 5/8" wire cable. Employee injured back while pulling cable.

Hoisting bad gear into ball of another truck, caught and between gear being hoisted and box of truck

EE was putting scrap iron in loader bucket and felt pull in abdomen.

EE was removing the guard to get across to clean the chains & sprockets. While lowering guard to ground, it slipped out of his hands and landed on his right foot. Co-worker was also helping him remove the guard. This work was being performed because we were on a mini outage. Employee did not get the treatment until the 9th.

While changing acetylene tank, tank slipped off the frame and pinched finger between tank & frame.

EE was welding inside inlet chute to heavy metals drum and got a foreign body in his right eye.

Lifting oxygen bottles & hurt back. *Employee hurt himself on 9/15/08 & did not tell us until 9/18/08.

Shoveling material into wheelbarrow and hurt his back.

Man got off dozer at break, climbed back up onto track when he felt a sharp pain in lower back. Notified foreman next day stating he was going to get checked out. Came back 11/1/07 with note of pinced nerve in lower back; medicine and MRI scheduled 11/5/07.

Employee struck left knee while loading truck with 55 gallon drums.

Lifting power cable for 7800 dragline, he felt pain in left shoulder and bicep area - torn bicep ligament at elbow.

One employee shut car door on this ee's hand.

While lifting iron plates and screens ee hurt his back.

WHILE CHECKING FOR OVERHEAD CONDUCTORS - THE SPRING LOADED DISCT SWITCH WAS ENGAGED - THIS ELECTRICIAN THEN ACCIDENTALLY HIT STOP BUTTON & THE SWITCH DISENGAGED HITTING MAN IN CHIN.

EE WAS LIFTING 8" STEEL PIPE ELBOW OUT OF BOX OF PU TRUCK WHEN PAIN IN LT BICEP OCCURRED. NO LOST TIME ACCIDENT UNTIL 11/22/03.

WHILE LIFTING PLATES EE HURT HIS SHOULDER AND NECK.

EE WAS PERFORMING NORMAL JOB SUFFER SPRAIN/STRAIN WHILE LIFTING PARTS - NO UNSAFE ACTION OR CONDITION TO REPORT.

2 EMPLOYEES WERE CARRYING IN IMPELLAR UP A FLIGHT OF 6 STEPS BY MEANS OF PASSING A BAL THRU IT. THIS EE TWISTED HIS RIGHT ANKLE.

WHILE HOOKING UP TRACTOR TO TRAILER, HE TWISTED LEFT KNEE.

EE STOOD UP & STRUCK HEAD AGAINST BOTTOM OF CONVEYOR.

EE TURNED ON HOSE & IT FLEW OUT OF HIS HANDS & HIT HIM IN FACE CAUSING LACERATION TO MOUTH-27 SUTURES.

WHILE INSTALLING AN ELECTRICAL MOTOR WIRE HARNESS BOXER PLATE, PLATE FELL LANDING ON EMPLOYEE'S FINGER.

EE WAS SERVICING DOZER - WHILE LIFTING/CARRYING OIL CAN & CLIMBING UP DOZER - EE EXPERIENCED PAIN IN LOWER ABDOMEN. DISABILITY BEGAN 5-14-02.

EE TWISTED RT KNEE WHILE OPENING VALVE.