Buscar en el registro

EE went to step out of a loader and the chain broke off of the chain step. EE fell about a foot and a half in which EE's knees got stuck under the loader. Ambulance was called and had taken EE to the emergency room to be checked over.

The employee was loading a scrap metal plate into a loader bucket. While the plate was being loaded, it slid out of the bucket and cut the lower left leg.

When using a chain hoist to rig a conveyor belt, employee got hand caught between chain hoist and motor. Resulting in a finger laceration to the left pinky.

Noise exposure from work related and non work related sources. All employees are provided access to hearing protection.

EE was thawing a pipe when it released and swung back. The water that came from the pipe knocked EE down. EE braced self with hands upon falling and jolted right shoulder.

Walking to the truck from the load out area when EE tripped over a mesh screen and fell.2

Carpel tunnel of right hand due to repetitive motion throughout EE's years working with the company.

Coming off the steps of a Haul Truck, employee slipped off the last step and felt right knee pop.

Moving the head on the drill up & down for mechanic to work on and the steel hammer came back and pinned EE's left elbow between it and the drill.

Employee twisted EE's knee while walking on uneven ground and stepped in a hole.

repetitive motion for the past 11 years while operating a dragline/shovel

SNOW - PLOWING INCIDENT. EE was plowing snow with a loader, broke through frost and hit solid ground. Machine stopped abruptly. EE was thrown into loader windshield.

Employee was walking out of the wash house when EE slipped and fell on the ice landing on right side.

Sore hands that are getting worse, went to OCC Medicine for evaluation. *Repetitive motion causing bilateral hand pain. EE has been working up until went for surgery on 2/14/2022. EE will be off for a while.

Employee was climbing on the machine to start shift when they slipped. The cause may have been some mud and frost on the machine. Employee did state they cleaned off their boots as best as possible.

While getting off the fuel truck, EE slipped on the step while hanging onto the bars and pulled something in the left shoulder and lower back.

WHILE WALKING FROM EMPLOYEE PARKING LOT TO EQUIPMENT IN THE DARK, THEY SLIPPED AND FELL TWISTING RIGHT KNEE.

An excavator operator was backing up a haul road and repairing the roadway as they traveled. The excavator traveled underneath a 69KV powerline owned by PPL. Unknown to the operator, the powerline arced to the boom of the excavator which cause a brief power interruption. The operator was only made aware of this at 11:30 am when an electrician showed up on site to investigate.

EE was climbing up the excavator for shift when foot/heel slipped on the track causing left knee to twist.

Loading drill steel onto a truck when the drill steel moved while being lifted. Right index and middle fingers were pinched between the drill steel and the truck

EE was moving full barrels when one slipped. EE went to catch the barrel and felt a pull in groin and abdomen areas.

While dismounting CM785 drill, employee's hands missed grab handles & employee fell down 2 steps to the ground.

Lifting a rock from the road and felt a pain in back, same area from previous work injury.

Brush fire on mine property. No employees or structures were in danger. Fire department responded. It took over 30 minutes to extinguish the fire.

Noise exposure from work related and non-work related sources. All employees are provided access to hearing protection.

Getting out of excavator, slipped on step, grabbed "bar" and felt pain in left hand/wrist

while fueling machinery, employee slipped on a rock/hole and fell twisting lower back and right ankle

Getting off a truck and the step broken resulting in a fall onto EE's right side.

prepping to move a dragline, attached a hook to the cable on the back and when pulling started, hook broke from cable and employee fell onto right shoulder and elbow

A non injury accident occurred when a 785B truck came in contact with a 69KVA power line owned by a utility company. The operator was hauling rock for road maintenance. The operator dumped the load and drove away with the box still raised underestimating the distance to the power line.

While using bearing press to press master link into a chain, chain shot out of press and struck right hand

While climbing down the 992 loader, the ladder swung and employee hyper extended their body and strained right lower back, buttocks and rear thigh/calf.

While getting out of broom, employee caught EE's foot on the door frame and fell to the ground

Employee was climbing ladder of a WA800 wheel loader while carrying a fire extinguisher. Employee felt a pull in right arm resulting in a strain and then banged right leg against the loader resulting in a contusion.

Carpal tunnel due to repetitive motion operating mobile equipment and hand tools. Accident occurred 1/31/2020 but EE has been working constantly up until 9/23/2020 and was told by Dr. that EE has to stop.

Employee was walking towards hitching post to plug EE's truck in at the end of EE's shift. EE slipped on the ice and spun around striking EE's right hand against front bumper of the truck.

Employee climbed down ladder of truck to the ground. Proceeded to walk away and slipped on ice. Grabbed ladder with left hand to break fall resulting in strained left shoulder.

Employee was using a large wrench to adjust the drag cable on a 4600 drag line when employee slipped, twisted and fell behind the drum.

While climbing a ladder the employee's foot slipped and employee twisted their back.

EE was walking across uneven ground on mine site and slipped on ice and fell to ground landing on back.

While walking across uneven ground, employee stepped on a rock and twisted right knee. Employee has been working all this time till 9/30/2020, employee gets surgery today.

EE backed truck up to dump. Revved engine & pulled dump lever & immediately felt & saw flames around cab coming from engine. EE exited truck and went down ladder.

While climbing down ladder, exiting loader, employee's foot slipped off 4th step causing employee to fall to the ground, striking head on ladder.

While dismounting the truck employee climbed down the ladder to the bumper. EE did not realize that the under bumper ladder was missing. When EE stepped over the bumper from that missing ladder EE fell to the ground.

During repair to coal vessel, employees hand was pinched between flange & coal chute.

Employee fell getting out of back hoe causing left shoulder injury.

EE was driving away from pump when EE saw flames behind the cab. EE stopped the truck & exited by jumping off the front bumper. The truck rolled backwards about 150 yards and stopped up against a pile of coal where it continued to burn. Fire Dept. arrived on scene & extinguished the truck.

Prying rock away from door employee hit right ring (4th) finger off C-channel.

No injury - near miss accident - Employee was dumping load out of 785B truck - pulled out with the box up & made contact with overhead power lines.

Employee was walking to designated parking area to dragline when ee slipped and fell on ice