Buscar en el registro

unloading AN from bulk unit, handle slipped, arm hit placard, cut forearm

Employee was lifting a filter box from filter trailer , caused a sharp pain to right arm and chest area , which ended as a strain to muscle of arm and chest area

Employee was in process of removing bolts and hardware from a 992d loader cab area with a 1/2" air gun. Air gun was left on cab floor area, while employee exiting cab area to ground by means of a portable ladder caught air gun hose and pulled air gun down against right jaw and face area.

EE WAS IN PROCESS OF LIFTING A METAL PLATE. WHILE BENDING DOWN TO LIFT OBJECT UP, EE STRAINED LOWER BACK.

EE WAS IN PROCESS OF CLOSING THE DOOR OF A DK45 DRILL TECH HIGHWALL DRILL, WHEN CLOSING DOOR EE CAUGHT LEFT THUMB AGAINST DOOR JAM AND HINGED AREA.

EE WAS CHECKING BATTERIES ON D-10 DOZER (CAT). A METAL BATTERY COVER HAD BEEN RAISED TO GAIN ACCESS TO BATTERIES. HE FAILED TO SECURE LID COVER. HE WAS STRUCK BY COVER WHILE WORKING ON BATTERI ES. THIS COVER IS HINGED AND ATTACHED TO MACHINE FRAME.

EMPLOYEE INJURED RIGHT GROIN AREA, WHILE STEPPING UP ON LADDER TO GAIN ACCESS TO BULK BIN COVER TO DETERMINE LEVEL OF BULK IN BIN.

EE WAS LOADING TOP BELT STRUCTURE 3 BREAKS INBY #2 BELT DRIVE ON NORTHEAST MAINS WHEN HE FELT PAIN IN HIS LOWER BACK

EMPLOYEE WAS ON HIS KNEES IN SCOOP DECK PULLING A CHAIN OUT OF A PUMP MOTOR COMPARTMENT THROUGH A HOLE IN THE COVER WHEN HE FELT A PAIN IN HIS BACK. #12 BREAK ON N.W. MAINS.

SCOOP OPERATOR WAS LOADING SUPPLIES 5 CROSSCUTS OUTBY FACE AREA-SPAD #5246 #6 ENTRY-WHEN HE TWISTED HIS BACK & FELF PAIN IN HIS LOWER BACK-LEFT SIDE

EMPLOYEE WAS LOADING OLD #3 BELT ONTO FLAT CARA WHEN CHAIN BROKE STRIKING EMPLLOYEES RIGHT CHEEK AND BREAKING GLASSES.

THE EMPLOYEE WAS HELPING A MECHANIC TO SET SOME CRIB BLOCKS TO ACK UP A LOADER, AND MASHED HIS RIGHT RINGER FINGER.

EE WAS REPAIRING AN AIR LOCK METAL DOOR ON THE SURFACE WHEN HE GOT A PIECE OF METAL IN HIS RT MIDDLE FINGER. DID NOT SEEK TREATMENT UNTIL 8-20-98.

EE WAS HELPING LOAD 40 LB TRACK RAILS ON A FLAT CAR. WHILE PUSHING ONE OF THE RAILS ON THE FLAT CAR HE STRAINED HIMSELF IN THE GROIN AREA.

EMPLOYEE WAS HOOKING UP TONGUE ON RAILRUNNER (MANTRIP) WHEN HE SQUEEZED HIS LEFT THUMB BETWEEN RAILRUNNER AND TONGUE. LOCATION WAS SIX CROSS CUTS UNDERGROUND IN #3 ENTRY AT SPAD #46.

THE EE WAS OPENING THE UTILITY BOX DOOR ON A DOZER. AT THE SAME TIME OTHER WAS CLOSING THE DOOR TO THE OPERATION COMPARTMENT AND THE TWO DOORS CROSSED CAUSING A PINCH POINT WHERE EE FINGERS WE RE.

THE EE WAS CLIMBING ONTO A HAULER TO DO SOME MECHANICAL REPAIRS WHEN PAIN HIT HIM IN HIS RIGHT LOWER BACK AND CONTINUED TO HURT.

EE WAS GETTING INTO THE RAIL. RUNNER IN THE SHOP AND HIT HIS LEFT KNEE ON TOP OF THE RAIL RUNNER.

EE WAS SHOVELING ON #2 BELT LINE @ BREAK 118. HEPICKED UP A SHOVEL FULL OF MUD & EXPERIENCED PAIN IN HIS RIGHT SIDE - GROIN AREA.

EE WAS WORKING IN THE UPPER PARKING LOT. HE WAS ATTEMPTING TO HOOK CHAIN THAT WAS ATTACHED TO LOADER BUCKET TO A ROLL OF BELT A CRIB BLOCK FELL OUT OF LOADER BUCKET, STRIKING HIM IN HEAD. REQU IRED STITCHES.

THE EE WAS HELPING TO PULL SOME 6 INCH HOSE DOWN THE MOUNTAIN WHERE HE AND SOME OTHER EE HAD BEEN PUMPING WATER OUT OF THE COAL PIT, AND STRAINED HIS BACK.

THE EE WAS TRYING TO PULL A TREE BRANCH OUT OF THE TRACKS OF HIS DOZER WHEN A LIMB CAME BACK AND HIT HIM IN THE EYE. HE DID NOT FEEL IT WAS NECESSARY TO SEE A DR UNTIL 4-25-94. HE RETURN TO WO RK 4-26-94. HE WAS REFERRED TO A EYE SPECIALIST,WHO STATED THAT HE HAD CUT THE CORNEA IN HIS EYE AND MAY HAVE TO HAVE I REPAIRED THRU LASER SURGERY.

THE EMPLOYEE WAS TRYING TO START ENGINE ON AN OIL PUMP. PULLED THE ROPE TOO HARD CAUSING IT TO BOTTOM OUT & STOP SUDDENLY. HE WAS JERKED CAUSING HIS BACK TO HURT.

THE EMPLOYEE WAS CRANKING A PUMP & THE ROPE SLIPPED CAUSING HIM TO STRAIN HIS ARM (LEFT ELBOW)

THE EMPOYEE WAS HLEPING TO BACKFILL HOLES WITH THE BLASTING CREW AND HIS BACK STARTED TO HURT. HE WAS SHOVELING DIRT AND FILLING UP THE HOLES. THE REASON HE WAS WORKING IN THIS CAPACITY ON T HIS DAY WAS DUE TO THE FACT THAT HIS DOZER WAS BROKEN DOWN AND BEING REPAIRED.

THE EMPLOYEE WAS REMOVING A HYDRAULIC PUMP FROM A DRILL AND CUT HIS RIGHT LITTLE FINGER ON A PIECE OF METAL.

THE EMPLOYEE WAS PULLING MINER CABLE TO THE OTHER SIDE OF THE RIB IN ORDER TO GET HIS PINNER THROUGH, AND PULLED HIS BACK.

THE EE WAS GETTING OUT OF HIS DRILL THRU THE RIGHT DOOR WHEN THE DOOR AND HANDLE SWUNG BACK AND HIT HIS ON THE RIGHT HIP.

THE EMPLOYEE WAS PUTTING A TRANSMISSION IN A SERVICE TRUCK. A BOLT BROKE, AND CAUSED THE TRANSMISSION TO FALL ON HIS RIGHT ARM. HIS ARM WAS BRUISED, BUT NOT BROKEN.

THE BELTS BROKE ON THE MOTOR THAT OPERATED THE PADDLE WHEEL TO THE WASHER. IN THE PROCESS OF REPLACING THE BELTS, THE MOTOR SLIPPED OFF THE STAND ONTO THE FLOOR. THE EMPLOYEE LIFTED THE MOTOR TO PUT IT BACK ON THE STAND AND SAID HIS BACK STARTED TO HURT.

EMPLOYEE WAS CHANGING OUT BELT CONVEYOR RETURN IDLERS WHEN HE STRAINED HIS BACK.

THE EMPLOYEE WAS COMING OUT OF THE MINE, WHEN HE DISCOVERED A ROCK ON THE TRAKC. HE MOVED THE ROCK OFF THE TRACK, AND HIS BACK STARTED TO HURT. THE ROCK WAS APPROX 4'X3".

54730OPERATES THE MINER. CARRYING A BUCKET OF MINER BITS,BENT OVER TO SET THEM DOWN AND A PAIN HIT IN THE MIDDLE OF EMPL BACK.

EMPL HELPING CARRY A HUB HOUSING UP THE STAIRWAY TO VIBRATOR ON THE WASHER AND BACK STARTED TO HURT.

THE EMPLOYEE WAS LEANING OVER THE FRAME OF A TRUCK HELPING ANOTHER EMPLOYEE LOOSEN AN OIL FILTER,AND STRAINED HIS GROIN CAUSING IT TO SWELL.

EE WAS HAULING HYDRAULIC PUMP ON TOP OF SCOOP DECK WHEN PUMP FELL STRIKING EE ON FOOT.

THE EMPLOYEE WAS SHOVELING WHILE BACKFILLING DRILL HOLES,STARTED TO STAND UP,AND A CATCH HIT HIM IN THE BACK.

THE EMPLOYEE WAS CLEANING THE BELTS.A ROCK FELL FROM THE ROOF ONTO THE TRACK.HE PICKED UP THE ROCK AND THREW IT OFF THE TRACK,RAISED UP AND STARTED TO WALK WHEN THE BACK STARTED HURTING.

THE EMPLOYEE WAS HANGING MINER CABLE AND HIS LEFT ARM AND SHOULDER STARTED TO HURT.

LOADING SOME HEAVY ROPE IN MANTRIP CAUGHT R HAND BETWEEN ROPE AND BELT MASHED HIS R INDEX FINGER

THE EE WAS CHANGING OUT THE BATTERY IN HIS LOADER, AND STRAINED HIS BACK HE WENT TO A DR ON 2/20 AND RETURNED TO WORK 2/21.

THE EMPLOYEE WAS REMOVING DIRT AND DEBRIS FROM THE EXHAUST SYSTEM OF A HAULER,WHEN FOREIGN MATTER ENTERED HIS EYE UNDER THE SAFETY SHIELD.HE DID NOT SEE A DOCTOR UNTIL 02-07-92.

PICKED UP FEEDER CABLE TO HANG PULLED MUSCLE IN STOMACH

THE EMPLOYEE WAS HELPING CLEAN UP IN THE SHOP. HE SHOVELED UP SOME TRASH, RAISED UP AND A CATCH HIT HIM IN THE BACK.

THE EMPLOYEE WAS OPERATING THE WASHER. A ROCK FELL IN THE TUNNEL BELT BLOCKING IT. THE EMPLOYEE TRIED TO MOVE THE ROCK, AND PULLED HIS BACK.

EMPL LIFTING MINER TRAILING CABLE TO MOVE CABLE OUT OF PATH OF ROOF BOLT MACHINE WHEN EMPL STRAINED BACK.

THE EMPLOYEE WAS OPERATING A ROOF BOLTER.HE WAS CARRYING SOME GLUE AROUND THE BOLTER AND RAN INTO AN OVERHANG HURTING HIS HEAD AND NECK.

THE EMPLOYEE WAS THROWING BAGS OF ROCK DUST ACROSS THE TAILPIECE AND SAID HIS BACK STARTED HURTING.

THE EMPLOYEE WAS ATTACHING A WIRE CABLE TO A DOZER, AND STUCK ONE STRAND OF WIREINTO HIS RIGHT HAND.

EMPL WAS HANGING SOME MINE CABLE & STRAINED MUSCLE IN LEFT SHOULDER.