Buscar en el registro

Excavator was working in Redwine pit, highwall collapsed causing rock to fall on excavator. This caused a fatal injury to operator.

Employee was removing a loader tooth, he struck tooth and a small piece of metal came off of the tooth and lodged under the skin of the left knee.

Dismounting a rock truck, missed hand rail with right hand, foot slipped and he fell. Machine was wet from rain.

unloading AN from bulk unit, handle slipped, arm hit placard, cut forearm

Dozer on edge of wall, slipped over.

The engine on a rock truck caught on fire. It looked like a hose blew spewing fuel or oil onto hot engine.

EMPLOYEE WAS IN PROCESS OF CLIMBING A 992 C CAT FRONT END LOADER, WHEN ENTERING OPERATORS COMPARTMENT ,FELT A SHARP PAIN IN MID RIGHT LOWER BACK AREA. WHILE TRYING OPERATE FRONT END LOADER PAIN BECAME MORE INTENSE , AT THAT TIME CO WORKER NOTIFIED FOREMAN OF INJURY .

Employee was lifting a filter box from filter trailer , caused a sharp pain to right arm and chest area , which ended as a strain to muscle of arm and chest area

Employee was in process of removing bolts and hardware from a 992d loader cab area with a 1/2" air gun. Air gun was left on cab floor area, while employee exiting cab area to ground by means of a portable ladder caught air gun hose and pulled air gun down against right jaw and face area.

EMPLOYEE , WHILE TRYING TO STEP DOWN OFF 777 A HAULER LADDER TO GROUND, STEEPED ON UNLEVEL GROUND SPRAINED RIGHT ANKLE

EE WAS IN PROCESS OF LIFTING A METAL PLATE. WHILE BENDING DOWN TO LIFT OBJECT UP, EE STRAINED LOWER BACK.

EE WAS IN PROCESS OF CLOSING THE DOOR OF A DK45 DRILL TECH HIGHWALL DRILL, WHEN CLOSING DOOR EE CAUGHT LEFT THUMB AGAINST DOOR JAM AND HINGED AREA.

EMPLOYEE WAS IN PROCESS OF BREAKING COAL IN PIT AREA WITH A 988 B CAT FRONT END LOADER, FRONT END LOADER BUCKET CAUGHT GROUND AND STOPPED ABRUPTLY, CAUSING EE TO BUMP INTO FRONT END LOADER STEERING WHEEL.

EE WAS CHECKING BATTERIES ON D-10 DOZER (CAT). A METAL BATTERY COVER HAD BEEN RAISED TO GAIN ACCESS TO BATTERIES. HE FAILED TO SECURE LID COVER. HE WAS STRUCK BY COVER WHILE WORKING ON BATTERI ES. THIS COVER IS HINGED AND ATTACHED TO MACHINE FRAME.

EE TRAMMED ESCAVATOR OVER ROUGH TERRAIN AT TOO HIGH RATE OF SPEED CAUSING ABRUPT MOVEMENT AND EVENTUAL PAIN IN LOWER BACK.

MATERIAL BEING EXCAVATED FROM HIGHWALL CAME LOOSE FELL FROM WALL THRU CAB AND STRUCK VICTIM ON LEFT LEG AND RIGHT KNEE CAUSING SCRAPES & BRUISES. FIRST AID ONLY NO MEDICAL TREATMENT ADMINISTER D

EMPLOYEE INJURED RIGHT GROIN AREA, WHILE STEPPING UP ON LADDER TO GAIN ACCESS TO BULK BIN COVER TO DETERMINE LEVEL OF BULK IN BIN.

EE WAS IN PROCESS OF OPERATING THE CONTROL LEVERS ON A D-65 EX-12 KOMATSU DOZER. THE MOVEMENT OF THE LEVERS TO TRAM & MANEUVER MACHINE CAUSED PAIN IN LEFT HAND & EVENTUAL PULLED LIGAMENT IN HA ND DIAGNOSIS.

EMPLOYEE WAS IN PROCESS OF STEPPING OFF OF 777-A HAUL TRUCK LADDER. WHILE STEPPING OFF SPRAINED LEFT ANKLE WHEN CONTACT WAS MADE WITH GROUND.

EMPLOYEE WAS SCALING HIGHWALL WITH 350C CAT EXCAVATOR ON UNDETECTED ROCK OF SMALL SIZE WAS UNDETECTED BY INJURED. ROCK HIT PROTECTIVE CAB, CAUSING JAR AND BRUISE TO RIGHT LEG. CAB WAS POSITION ED AWAY FROM HIGHWALL DURING THE PROCESS OF SCALING HIGHWALL.

VICTIM WAS OPERATING CAT D11N DOZER IN ROAD PREPARATION WORK. THE ROADWAY BECAME SOFT AND ELEVATED, HIDDEN AREAS CAUSED TO DOZER TO SLIDE & OVERTURN. THE VICTIM RECEIVED INJURY TO LEFT SHOULD ER AND ONE RIB. TREATED & RELEASED AFTER INITIAL TREATMENT. (RAIN & VISIBILITY WERE FACTORS).

EMPLOYEE WAS OPERATING DOZER(CAT D-ION) ON SPOILAREA,BACKED UP AND OVER ROCK IN ROADWAY, TRACKEDSLIPPED OFF ROCK,JARRED EMPLOYEE CAUSING PAIN IN NECK AREA FROM SUDDEN JAR & IMPACT.

EE WAS USING A 1 1/2" AIR IMPACT TOOL WHILE STANDING ON LADDER AND REACHING OVER HEAD TO TIGHTENCOLLET BOLTS OF 922-C CAT FRONT END LOADER BOOM PINS. EE FELT SMALL PAIN TO LOWER BACK, NOT SIGN IFICANT AT TIME. REPORTED 2 DAYS LATER AS STRAINED LOWER BACK.

EMPLOYEE OPERATING 375 KOMATSU DOZER, CLEANING HIGHWALL OF DEBRIS AND TREES, SLID OFF TREE AGAINST HIGHWALL WITH DOZER FRAME, CAUSING SUDDEN IMPACT IN CAB AND SEAT COMPARTMENT .

EE BECAME WEAK FROM HEAT & LOSS OF FLUID DUE TO 95 DEGREE TEMPERATURE & HUMIDITY.

WHILE GRINDING METAL BOX, EMPLOYEE FELT OBJECT ENTER EYE, METAL CAUSED DISCOMFORT TO EMPLOYEE LATER IN THE DAY AND WAS REMOVED IN EMERGENCY ROOM. EMPLOYEE STATED HE WAS WEARING SAFETY GLASSE S.

EE WAS EXITING LOADER (992) CAB BY MEANS OF EQUIPMENT LADDER, STEPPED TO GROUND FROM BOTTOM STEP (2 FT) TWISTED BACK.

EE WAS IN THE PROCESS OF STEPPING FROM BULK TRUCK WHEN HE SLIPPED OFF OF STEP AND SPRAINED RIGHT ANKLE AND FRACTURE. (APPROXIMATELY 2' DROP)

OPERATOR WAS REMOVING OVERBURDEN, WHICH CONTAINED LANRGE SNADSTONE ROCKS. THIS CONDITION SOMETIMES CAUSES THE MACHINE TO SUDDENLY JERK & JAR. OPERATOR STATED AT THE END OF SHIFT, HIS NECK WAS HURTING. THE NEXT MORNING IT WAS WORSE, DR., STATED THAT HE HAD SPRAINED NECK AND UPPER BACK. ADVISED HIM TO TAKE A FEW DAYS OFF AND SHOULD BE OKAY.

EE WAS LOADING TOP BELT STRUCTURE 3 BREAKS INBY #2 BELT DRIVE ON NORTHEAST MAINS WHEN HE FELT PAIN IN HIS LOWER BACK

EMPLOYEE WAS REPLACING BELT STRUCTURE AT THE END OF LONG JOHN AT THE #4 HEADING AT THE OUTBY AND OF LO-LO BELT STRUCTURE WHEN HE STUMBLED AND FELL HURTIN GHIS RIGHT LEG AND BACK.

EMPLOYEE IS MAKING A CLAIM FOR CARPAL TUNNEL SYNDROME.

EMPLOYEE WAS ON HIS KNEES IN SCOOP DECK PULLING A CHAIN OUT OF A PUMP MOTOR COMPARTMENT THROUGH A HOLE IN THE COVER WHEN HE FELT A PAIN IN HIS BACK. #12 BREAK ON N.W. MAINS.

SCOOP OPERATOR WAS LOADING SUPPLIES 5 CROSSCUTS OUTBY FACE AREA-SPAD #5246 #6 ENTRY-WHEN HE TWISTED HIS BACK & FELF PAIN IN HIS LOWER BACK-LEFT SIDE

THE EE WAS REPAIRING A LOADER RAISED UP AND HIT HIS HEAD ON A PIECE OF ANGLE IRON CUTTING HIS HEAD. HE DID NOT MISS ANY WORK BUT DID HAVE STITCHES.

EE WAS INSTALLING ROOF BOLT IN 6 RIGHT CROSSCUT WHEN HE FELT A TEARING SENSATION IN HIS BACK.

EMPLOYEE WAS LOADING OLD #3 BELT ONTO FLAT CARA WHEN CHAIN BROKE STRIKING EMPLLOYEES RIGHT CHEEK AND BREAKING GLASSES.

THE MECHANIC WAS PULLING THE ENGINE OUT OF A HAULER. HE STARTED TO STEP FROM THE FRAME TO THE LADDER WHEN HIS FOOT SLIPPED CAUSING HIM TO TWIST HIS LEFT KNEE.

THE EMPLOYEE WAS HELPING A MECHANIC TO SET SOME CRIB BLOCKS TO ACK UP A LOADER, AND MASHED HIS RIGHT RINGER FINGER.

EMPLOYEE WAS OPENING UST BOX ON ROOF BOLTER IN INTERSECTION IN #5 ENTRY, LAST OPEN CROSSCUT WHEN A ROCK FELL MASHING LEFT INDEX FINGER BETWEEN ROCK AND DOOR.

WHILE MOVING THE LONG JOHN BACK ON THE 002 SECT EE WAS ATTEMPTING TO RMEOVE A 1/2" CHAIN THAT HAD THE LONG JOHN DOLLY HOOKED TO THE FRAME OF THELONG JOHNS. THE MBC OPERATOR MOVED THE MBC UNAWA RE THAT EE HAD PLACED HIS HAND ON CAIN AND PINCHED

VICTIM WAS OPERATING MBC WHEN A PIECE OF DRAW ROCK FELL FROM BETWEEN BOLTS STRIKING IN THE MIDDLE OF HIS BACK. 10/7-DR. VISIT NO TREAATMENT. 11/3- BEGAN PHYSICAL THERAPY.

EE STARTED TO BOLT FIRST CUT OUT OF 5R BREAK, 2 BREAKS INBY SPAD #1440, WHEN A ROCK 49" X 30" X 4" / 5" FELL OUT OF TOP ON EE, HITTING HIM ON THE LEFT HIP.

EE WAS REPAIRING AN AIR LOCK METAL DOOR ON THE SURFACE WHEN HE GOT A PIECE OF METAL IN HIS RT MIDDLE FINGER. DID NOT SEEK TREATMENT UNTIL 8-20-98.

EE WAS HELPING LOAD 40 LB TRACK RAILS ON A FLAT CAR. WHILE PUSHING ONE OF THE RAILS ON THE FLAT CAR HE STRAINED HIMSELF IN THE GROIN AREA.

EE WAS STEPPING DOWN OFF HIS DOZER AT THE END OF THE SHIFT. HE STEPPED ON THE TRACK, SLIPPED AND FELL TO THE GROUND. THE TRACK WAS MUDDY DUE TO THE FACT THAT WE HAD WATERED THE ROAD TO KEEP TH E DUST DOWN. SAFETY HAND RAILS WERE THERE, BUT EVIDENTLY NOT USED.

CONDITIONS NOT RELATED. TRUCK DRIVER TRIPPED TAILGATE LEVER AND LEVER HIT WRIST AND BROKE IT.

EE WAS DRIVING HAULER TO REFUSE AREA, WHEN HE LOST CONTROL GOING DOWN HILL. HE RAN TRUCK INTO BURM AND TRUCK OVER TURNED.

EMPLOYEE WAS HOOKING UP TONGUE ON RAILRUNNER (MANTRIP) WHEN HE SQUEEZED HIS LEFT THUMB BETWEEN RAILRUNNER AND TONGUE. LOCATION WAS SIX CROSS CUTS UNDERGROUND IN #3 ENTRY AT SPAD #46.

EMPLOYEE WAS INSTALLING BOLTS ON OFF SIDE OF DUAL HEAD BOLTER IN THE HEADING WHEN HE FELT A BURNING SENSATION IN HIS LOWER ABDOMEN.